Evaluating the nonlinear dynamics of human descending thoracic aortas is essential for building the next generation of vascular prostheses. This study characterizes the nonlinear dynamics, viscoelastic material properties, and fluid-structure interaction of 11 ex-vivo human descending thoracic aortas the full range of physiological heart rates. The aortic segments are harvested from heart-beating donors screened for transplants. A mock circulatory loop is developed to reproduce physiological pulsatile pressure and flow. The results show cyclic axisymmetric diameter changes, which are satisfactorily compared to in-vivo measurements at a resting pulse rate of 60 bpm, with an additional bending vibration. An increase of the dynamic stiffness (i.e., storage modulus) with age is also observed. This increase is accompanied by a strong reduction with age of the cyclic diameter change during the heart pulsation at 60 bpm and by a significant reduction of the loss factor (i.e., damping). Large dissipation is observed at higher pulse rates due to the combined effects of fluid-structure interaction and viscoelasticity of the aortic wall. This study presents data necessary for developing innovative grafts that better mimic the dynamics of the aorta.
Experimental data and a suitable material model for human aortas with smooth muscle activation are not available in the literature despite the need for developing advanced grafts; the present study closes this gap. Mechanical characterization of human descending thoracic aortas was performed with and without vascular smooth muscle (VSM) activation. Specimens were taken from 13 heart-beating donors. The aortic segments were cooled in Belzer UW solution during transport and tested within a few hours after explantation. VSM activation was achieved through the use of potassium depolarization and noradrenaline as vasoactive agents. In addition to isometric activation experiments, the quasistatic passive and active stress–strain curves were obtained for circumferential and longitudinal strips of the aortic material. This characterization made it possible to create an original mechanical model of the active aortic material that accurately fits the experimental data. The dynamic mechanical characterization was executed using cyclic strain at different frequencies of physiological interest. An initial prestretch, which corresponded to the physiological conditions, was applied before cyclic loading. Dynamic tests made it possible to identify the differences in the viscoelastic behavior of the passive and active tissue. This work illustrates the importance of VSM activation for the static and dynamic mechanical response of human aortas. Most importantly, this study provides material data and a material model for the development of a future generation of active aortic grafts that mimic natural behavior and help regulate blood pressure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.