No abstract

This paper summarizes recent activities carried out for the development of an innovative anthropomorphic robotic hand called the DEXMART Hand. The main goal of this research is to face the problems that affect current robotic hands by introducing suitable design solutions aimed at achieving simplification and cost reduction while possibly enhancing robustness and performance. While certain aspects of the DEXMART Hand development have been presented in previous papers, this paper is the first to give a comprehensive description of the final hand version and its use to replicate human-like grasping. In this paper, particular emphasis is placed on the kinematics of the fingers and of the thumb, the wrist architecture, the dimensioning of the actuation system, and the final implementation of the position, force and tactile sensors. The paper focuses also on how these solutions have been integrated into the mechanical structure of this innovative robotic hand to enable precise force and displacement control of the whole system. Another important aspect is the lack of suitable control tools that severely limits the development of robotic hand applications. To address this issue, a new method for the observation of human hand behavior during interaction with common day-to-day objects by means of a 3D computer vision system is presented in this work together with a strategy for mapping human hand postures to the robotic hand. A simple control strategy based on postural synergies has been used to reduce the complexity of the grasp planning problem. As a preliminary evaluation of the DEXMART Hand's capabilities, this approach has been adopted in this paper to simplify and speed up the transfer of human actions to the robotic hand, showing its effectiveness in reproducing human-like grasping

No abstract

No abstract

This paper quantitatively reports about potential energy savings on robotic assembly lines for the automotive industry. At first, a detailed system model is described, which improves previously published results by explicitly considering both manipulator and electrical drive dynamics. The model closely captures experimental data in terms of actuation torques and servodrive voltages, which are directly used to derive the plant input power. Two practical methods are then evaluated for reducing the overall energy consumption. The methods rely on: 1) implementation of energy-optimal trajectories obtained by means of time scaling, concerning the robots' motion from the last process point to the home positions and 2) reduction of energy consumption by releasing the actuator brakes earlier when the robots are kept stationary. Simulation results, based on the production timing characteristics measured at a real plant, clearly shows that the system energy consumption can be effectively reduced without negative effects on the production rate

Variable stiffness actuators can be used in order to achieve a suitable trade-off between performance and safety in robotic devices for physical human–robot interaction. With the aim of improving the compactness and the flexibility of existing mechanical solutions, a variable stiffness actuator based on the use of flexures is investigated. The proposed concept allows the implementation of a desired stiffness profile and range. In particular, this paper reports a procedure for the synthesis of a fully compliant mechanism used as a nonlinear transmission element, together with its experimental characterization. Finally, a preliminary prototype of the overall joint is depicted.

A novel mathematical procedure is presented, which makes it possible to optimize lozenge-shaped dielectric-elastomer-based linear actuators for known materials and desired force/stroke requirements. Simulation and experimental results are provided which both demonstrate the efficacy of the proposed optimization procedure with respect to traditional design approaches and show that simpler, cheaper, lighter, and better-behaved lozenge-shaped actuators can be conceived, which do not require any integration of compliant frame elements.

The interest in actuators based on dielectric elastomer films as a promising technology in robotic and mechatronic applications is increasing. The overall actuator performances are influenced by the design of both the active film and the film supporting frame. This paper presents a single-acting actuator, which is capable of supplying a constant force over a given range of motion. The actuator is obtained by coupling a rectangular film of silicone dielectric elastomer with a monolithic frame designed to suitably modify the force generated by the dielectric elastomer film. The frame is a fully compliant mechanism whose main structural parameters are calculated using a pseudo-rigid-body model and then verified by finite element analysis. Simulations show promising performance of the proposed actuator.