[1] Waters and dissolved gases collected along vertical profiles in the five basins (Main, Kabuno Bay, Kalehe, Ishungu, and Bukavu) forming the 485 m deep Lake Kivu (Democratic Republic of the Congo) were analyzed to provide a geochemical conceptual model of the several processes controlling lake chemistry. The measured horizontal and vertical variations of water and gas compositions suggest that each basin has distinct chemical features produced by (1) different contribution from long circulating fluid system containing magmatic CO 2 , responsible of the huge CO 2 (CH 4 )-rich reservoir hosted within the deep lake water; (2) spatial variations of the biomass distribution and/or speciation; and (3) solutes from water-

A new analytical method for the determination of the sulfur species (SO2, H2S, S8(0)) in volcanic gases is proposed by revising, updating, and improving previous methods. The most significant advantages of the proposed procedure can briefly be summarized, as follows: (i) the reaction among sulfur species stops during the gas sampling by using preevacuated thorion-tapped vials with purified 0.15M Cd(OH)2 in 4 M NaOH to favor the precipitation of H2S as CdS; (ii) all the sulfur species (SO2, H2S, S8(0)) are analyzed by ion chromatography, after conversion to SO4, which allows the detection limit to be lowered significantly with respect to the previous studies; (iii) appropriate aliquots from intermediate steps may be used to determine other species commonly present in volcanic gases such as CO2, HCI, HF, HBr, HI, and so forth; (iv) determination of all the other gas species is not jeopardized by the proposed method, i.e., one single vial can be used for analyzing the full chemical composition of a volcanic gas with the exception of NH3. Statistical parameters calculated from gas sampling data at the F5 crater fumarole in Vulcano Island (Aeolian Islands, southern Italy), suggest that the standard error of mean (s/ root n) is higher for S (0.10), followed by SO2, H2S, and CO2 (0.04, 0.038, and 0.028, respectively). SO2 shows the higher variation coefficient (12.1%) followed by H2S, S, and CO2 (5.7, 1.5, and 0.8%, respectively). Furthermore, if the time dependence of sampling is taken into account, the measured values, instead of fluctuating in a random manner, tend to follow systematic patterns, out of statistical control, possibly suggesting a sort of natural fluctuation of the volcanic system. Other crater fumaroles from volcanic systems located in different geodynamical areas (Hawaii, USA, El Chichon, Mexico, Poas, Costa Rica) have been analyzed as well.

No abstract

No abstract

Estimating values of permeability (k), ef cient porosity (P) and hydraulic conductivity (K) by analysing eld outcrops as analogue of geothermal reservoirs, is a timely theme useful for predictions during geothermal ex- ploration programs. In this paper we present a methodology providing k, P and K values, based on geomet- ric analysis of quartz-tourmaline faults-vein arrays hosted in micaschist exposed in south-eastern Elba Island (Tuscan Archipelago, Italy), considered as the analogue of rock hosting the so-called “deep reservoir” in the Larderello geothermal eld. The methodology is based on the integration among structural geology, uid inclu- sions results and numerical analyses. Through a detailed structural mapping, scan-lines and scan-boxes analy- ses, we have reconstructed three superposed faulting events, developed in an extensional setting and framed in the Neogene evolution of inner Northern Apennines. Geometrical data of the fault-veins array were processed by reviewing the basic parallel-plate-model-equation for k evaluation. Fluid inclusion analyses provided those salinity and pressure-temperature values necessary for de ning density and viscosity of the parent geothermal uids. Then, permeability, density and viscosity were joined to get hydraulic conductivity (K). Permeability is estimated between 5 × 10− 13 and 5 × 10− 17 m2 with variations among the different generation of faults, while the hydraulic conductivity is encompassed between 1.31 × 10− 8 and 2.4 × 10− 13 m/s. The obtained permeabil- ity and hydraulic conductivity values are comparable with those from several geothermal areas, and in particular from the Larderello geothermal eld. The main conclusion is that the proposed integrated approach provides a reliable methodology to obtain crucial values, normally obtained after drilling, for developing numerical ow models of geothermal uid path in active geothermal systems by eld and laboratory analyses of analogue, ex- humed, geothermal systems