The iron-chromium-aluminum alloy (FeCrAl) is an exceptional support for highly exothermic and endothermic reactions that operate above 700 °C in chemically aggressive environments, where low heat and mass transfer rates limit reaction yield. FeCrAl two-and three-dimensional structured networksmonoliths, foams, and fibersmaximize mass transfer rates, while their remarkable thermal conductivity minimizes hot spots and thermal gradients. Another advantage of the open FeCrAl structure is the low pressure drop due to the high void fraction and regularity of the internal path. The surface Al 2 O 3 layer, formed after an initial thermal oxidation, supports a wide range of metal and metal oxide active phases. The aluminum oxide that adheres to the metal surface protects it from corrosive atmospheres and carbon (carburization), thus allowing FeCrAl to operate at a higher temperature. The top applications are industrial burners, in which compact knitted metal fibers distribute heat over large surface areas, and automotive tail gas converters. Future applications include producing H 2 and syngas from remote natural gas in modular units. This Review summarizes the specific preparation techniques, details process operating conditions and catalyst performance of several classes of reactions, and highlights positive and challenging aspects of FeCrAl.
Methane is the second highest contributor to the greenhouse effect. Its global warming potential is 37 times that of CO2. Flaring-associated natural gas from remote oil reservoirs is currently the only economical alternative. Gas-to-liquid (GtL) technologies first convert natural gas into syngas, then it into liquids such as methanol, Fischer–Tropsch fuels or dimethyl ether. However, studies on the influence of feedstock composition are sparse, which also poses technical design challenges. Here, we examine the techno-economic analysis of a micro-refinery unit (MRU) that partially oxidizes methane-rich feedstocks and polymerizes the syngas formed via Fischer–Tropsch reaction. We consider three methane-containing waste gases: natural gas, biogas, and landfill gas. The FT fuel selling price is critical for the economy of the unit. A Monte Carlo simulation assesses the influence of the composition on the final product quantity as well as on the capital and operative expenses. The Aspen Plus simulation and Python calculate the net present value and payback time of the MRU for different price scenarios. The CO2 content in biogas and landfill gas limit the CO/H2 ratio to 1.3 and 0.9, respectively, which increases the olefins content of the final product. Compressors are the main source of capital cost while the labor cost represents 20–25% of the variable cost. An analysis of the impact of the plant dimension demonstrated that the higher number represents a favorable business model for this unit. A minimal production of 7,300,000 kg y−1 is required for MRU to have a positive net present value after 10 years when natural gas is the feedstock.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.