Arrays of III–V direct-bandgap semiconductor nanopillars represent promising photovoltaic candidates due to their inherent high optical absorption coefficients and minimized reflection arising from light trapping, efficient charge collection in the radial direction and the ability to synthesize them on low-cost platforms. However, the increased surface area results in surface states that hamper the power conversion efficiency. Here, we report the first demonstration of GaAs nanopillar-array photovoltaics employing epitaxial passivation with air mass 1.5 global power conversion efficiencies of 6.63%. High-bandgap epitaxial InGaP shells are grown in situ and cap the radial p–n junctions to alleviate surface-state effects. Under light, the photovoltaic devices exhibit open-circuit voltages of 0.44 V, short-circuit current densities of 24.3 mA cm−2 and fill factors of 62% with high external quantum efficiencies >70% across the spectral regime of interest. A novel titanium/indium tin oxide annealed alloy is exploited as transparent ohmic anode.

No abstract

Photovoltaic devices using GaAs nanopillar radial p-n junctions are demonstrated by means of catalyst-free selective-area metal-organic chemical vapor deposition. Dense, large-area, lithographically defined vertical arrays of nanowires with uniform spacing and dimensions allow for power conversion efficiencies for this material system of 2.54% (AM 1.5 G) and high rectification ratio of 213 (at ±1 V). The absence of metal catalyst contamination results in leakage currents of ∼236 nA at -1 V. High-resolution scanning photocurrent microscopy measurements reveal the independent functioning of each nanowire in the array with an individual peak photocurrent of ∼1 nA at 544 nm. External quantum efficiency shows that the photocarrier extraction highly depends on the degenerately doped transparent contact oxide. Two different top electrode schemes are adopted and characterized in terms of Hall, sheet resistance, and optical transmittance measurements.

The rational design of supramolecular nanoparticles by self-assembly is a crucial field of research due to the wide applications and the possibility of control through external triggers. Understanding the shape-determining factors is the key for tailoring nanoparticles with desired properties. Here, we show how the thermodynamics of the interaction control the shape of the nanoparticle. We highlight the connection between the molecular structure of building blocks, the interaction strength, and the nanoassembly shape. Nanoparticles are prepared by electrostatic self-assembly of cationic polyelectrolyte dendrimers of different generations and oppositely charged multivalent organic dyes relying on the combination of electrostatic and π-π interactions. Different building blocks have been used to vary interaction strength, geometric constraints, and charge ratio, providing insights into the assembly process. The nanoassembly structure has been characterized using atomic force microscopy, static light scattering, small angle neutron scattering, and UV-vis spectroscopy. We show that the isotropy/anisotropy of the nanoassemblies is related to the dye valency. Isothermal titration calorimetry has been used to investigate both dye-dye and dye-dendrimer interaction. The existence of a threshold value in entropy and enthalpy change separating isotropic and anisotropic shapes for both interactions has been demonstrated. The effects of the dye molecular structure on the interaction thermodynamics and therefore on the nanoparticle structure have been revealed using molecular modeling. The polar surface area of the dye molecule takes a key role in the dye self-interaction. This study opens the possibility for a priori shape determination knowing the building blocks structure and their interactions.

The implementation of artificial molecular machines in polymer science is an important objective that challenges chemists and physicists in order to access an entirely new class of smart materials. To design such systems, the amplification of a mechanical actuation from the nanoscale up to a macroscopic response in the bulk material is a central issue. In this article we show that bistable [c2]daisy chain rotaxanes (i.e., molecular muscles) can be linked into main-chain Upy-based supramolecular polymers. We then reveal by an in depth quantitative study that the pH actuation of the mechanically active rotaxane at the nanoscale influences the physical reticulation of the polymer chains by changing the supramolecular behavior of the Upy units. This nanoactuation within the local structure of the main chain polymer results in a mechanically controlled sol-gel transition at the macroscopic level.