Yatta is a town located nine kilometers south of Hebron city in the West Bank of Palestine. The town houses over 100,000 people of which 49% are females and has a population that doubles every 15 years. Yatta has been connected to a water network since 1974 serving nearly 85% of its households. The water network is old and inadequate to meet the needs of the population. Water supply made available to the area is limited, estimated at 20 L/capita/day. Residents are thus forced to rely on water vendors who supply water that is 400% more expensive with a lower quality compared to municipal water. Therefore, rainwater harvesting is a common practice in the area, with the majority of households owning at least one cistern. Rainwater harvesting is of great socio-economic importance in areas where water sources are scarce and/or polluted. In this research, the quality of harvested rainwater used for drinking and domestic purposes in Yatta was assessed throughout one year. A total of 100 samples were collected from cisterns with an average capacity of 69 m3, which are adjacent to cement-roof catchment areas of 145 m2 average surface area. Samples were analyzed for a number of parameters including temperature, pH, alkalinity, hardness, turbidity, total dissolved solids, NO3, NH4, chloride and salinity. Results showed that most of the rainwater samples were within World Health Organization (WHO) and Environment Protection Agency (EPA) guidelines for chemical parameters. Microbiological contents such as total Coliforms and faecal Coliforms bacteria were tested. The research also addressed the impact of rainwater harvesting systems on different socio-economic attributes of the local community through a questionnaire that had been filled out before any sample was collected.
In recent years, concerns have been raised about the occurrence of active raw materials and pharmaceutical ingredients that may be present in water, including wastewater, in the pharmaceutical industry. Wastewater treatment methods are not enough to completely remove active pharmaceuticals and other waste; thus, this study aims to assess the use of a multiwall carbon nanotube after derivatization and magnetization as a new and renewable absorbent for removing ibuprofen from an aqueous medium. The adsorbents were prepared by first oxidizing a multiwall carbon nanotube and then deriving the oxidized product with hydroxyl amine (m-MWCNT–HA), hydrazine (m-MWCNT–HYD), and amino acid (m-MWCNT–CYS). Adsorbents were characterized by Raman spectroscopy, Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM and TEM), Brunauer–Emmett–Teller surface area analysis (BET), thermogravimetric analysis (TGA), and vibrating sample magnetometer (VSM). Batch adsorption studies were conducted to study the effects of pH, temperature, time, and initial concentration of the adsorbate. Adsorption isotherm, kinetics, and thermodynamics studies were also conducted. The results show that the optimal pH for nearly complete removal of Ibu in a short time at room temperature was 4 for three adsorbents. The adsorption followed the Langmuir isotherm model with pseudo-second-order kinetics. The percentage of removal of ibuprofen reached up to 98.4%, 93%, and 61.5% for m-MWCNT–CYS, m-MWCNT–HYD, and m-MWCNT–HA respectively. To the best of our knowledge, the grafted MWCNTs presented in this work comprise the first example in the literature of oxidized MWCNT modified with such functionalities and applied for ibuprofen removal.
Graphene oxide–chitosan composites are attracting considerable interest as an eco-friendly adsorbent material for most aquatic environmental pollutants. Today, the focus is on the emerging applications of 2D and 3D graphene functionalized with chitosan to enhance its mechanical properties and adsorption efficiency. Herein, the super adsorbent 3D graphene functionalized with chitosan (3D GF-CS) is synthesized to remove sulfamethazine, (SMZ) as a model aquatic antibiotic pharmaceutical. The synthesized materials were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photon spectroscopy (XPS), Brunauer–Emmett–Teller (BET), and Raman spectroscopy. After that, adsorption experiments were conducted for SMZ adsorption to find out the optimized adsorption parameters, such as pH, temperature, contact time, initial antibiotic concentration, and adsorbent dosage. The results show the optimal adsorption parameters were as pH of 7, temperature of 25°C, initial antibiotic concentration Ci of 50 ppm. Also, the kinetics, isotherms models, and thermodynamics parameters of SMZ adsorption were studied. The experimental results revealed to be best suited by both the pseudo-second-order kinetic and the Freundlich isotherm model compared with other isotherm models. The thermodynamics parameters demonstrated that the adsorption is exothermic, exhibiting higher adsorption efficiency at lower temperature. In addition, Gibb’s free energy suggested the adsorption to be spontaneous as well as entropy indication of the loss of disorder. Furthermore, the regeneration of 3D GF-CS was utilized in ten consecutive cycles, and the SMZ adsorption capacity did not decline significantly. Additionally, this research studied the adsorption energies and how sulfamethazine adsorbs onto 3D GF-CS was determined by applying the density-functional–based tight binding (DFTB) and Monte Carlo simulations at different adsorption positions. The chemical reactivity (local and global) of the free drug was investigated using the density functional theory (DFT), namely, the B3LYP and PBEPBE functionals with the 6–31+G (d, p) basis set in the gas phase and aqueous solution.
The goal of this work was to develop polymer-based heterocycle for water purification from toxic pesticides such as difenoconazole. The polymer chosen for this purpose was cellulose nanocrystalline (CNC); two cellulose based heterocycles were prepared by crosslinking with 2,6-pyridine dicarbonyl dichloride (Cell-X), and derivatizing with 2-furan carbonyl chloride (Cell-D). The synthesized cellulose-based heterocycles were characterized by SEM, proton NMR, TGA and FT-IR spectroscopy. To optimize adsorption conditions, the effect of various variable such as time, adsorbent dose, pH, temperature, and difenoconazole initial concentration were evaluated. Results showed that, the maximum difenoconazole removal percentage was about 94.7%, and 96.6% for Cell-X and Cell-D, respectively. Kinetic and thermodynamic studies on the adsorption process showed that the adsorption of difenoconazole by the two polymers is a pseudo-second order and follows the Langmuir isotherm model. The obtained values of ∆G ° and ∆H suggest that the adsorption process is spontaneous at room temperature. The results showed that Cell-X could be a promising adsorbent on a commercial scale for difenoconazole. The several adsorption sites present in Cell-X in addition to the semi crown ether structure explains the high efficiency it has for difenoconazole, and could be used for other toxic pesticides. Monte Carlo (MC) and Molecular Dynamic (MD) simulation were performed on a model of Cell-X and difenoconazole, and the results showed strong interaction.
As the need for water is increasing in Palestine, and the available water resources are barely sufficient to meet the demands of the current quality of life and the economy, air conditioner condensate water could be explored as an alternative water source. The objective of this study is to better understand the potential for recovery of condensate water from air conditioning systems in two Palestinian cities. In addition, this study aims to evaluate this water source in terms of quality and quantity. Generally, it was found that the condensate water has good quality, which conforms to the Palestinian standards for reused water for irrigation, except for turbidity, biological oxygen demand (BOD) and chemical oxygen demand (COD) measurements. Reflecting the heavy metal occurrence in the collected condensate water, no particular risk was recognized for drinking water or reused irrigation standards, except for manganese occurrence of 0.19 mg/L in one sample. From a single unit capacity, high quantities of water were observed of approximately 259 L and 453 L per month in Ramallah and Jericho cities, respectively. These figures should draw the attention of decision and policy makers to put in place strict technical guidelines to be followed for potential reuse of condensate water at the local level.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.