Crystallization of salts is a common cause of damage in porous building materials. Understanding of the crystallization mechanism of salts is important in order to prevent or avoid the problem. Subflorescence of salts (i.e., crystallization within the pores of the body) can induce scaling and cracking, while efflorescence (i.e., crystallization in a film of solution on the exterior surface of the body) does not generally affect the coherence and endurance of the building materials.In this paper, we deal with the crystallization behavior of two salts, sodium sulfate and sodium chloride, in two bricks with different capillary porosity. The results reveal quite different crystallization behavior depending on salt and substrate.The supersaturation of the solution is induced in our experiments by evaporation. Indeed, the main reason for the different behavior of these salts is their different ability to supersaturate. Thus, the sodium sulfate solution is prone to be much more supersaturated than the sodium chloride solution. Furthermore, the solution transport, which depends on salt properties, material porosity, pore-clogging and environmental conditions, affects the position of the drying front and, with it, the crystallization front, leading to the formation either of efflorescence or of subflorescence. Simulation of the experiments is used to understand the effect of the influencing factors on the crystallization pattern. Therefore, considering both factors, supersaturation ratio and solution transport, it is possible to predict the different crystallization behaviors observed in the experiments.
Zur Beschreibung von Wärme‐ und Feuchtetransportvorgängen gekoppelt mit Stofftransportprozessen in porösen Baustoffen ist ein Differentialgleichungssystem bestehend aus der Energieerhaltungsgleichung und den Massenerhaltungsgleichungen aller beteiligten Stoffe einschließlich des Wassers aufzulösen. Hierzu ist die Modellierung der stattfindenden Phasenumwandlungen der vorliegenden Stoffe und der chemischen Reaktionen der Porenlösung mit der Baustoffmatrix erforderlich. Zu unterscheiden sind dazu inerte, nicht reaktive Baustoffe und reaktionsfähige, zementgebundene Baustoffe. Für die numerische Simulation dieser Vorgänge bzw. die praktische Handhabbarkeit der Problemlösung wurde eine benutzerfreundliche Programmoberfläche AStra geschaffen, die neben dem eigentlichen Berechnungsmodul die benötigten Pre‐ und Postprocessing Möglichkeiten beinhaltet.
Für die Berechnung des zeitlichen Verlaufs eines lösenden oder treibenden Angriffs auf zementgebundene Baustoffe wird durch eine in Abhängigkeit der beteiligten Spezies geeignete Vorauswahl von ablaufenden Reaktionen der Rechenaufwand für die Vorhersage von Nichtgleichgewichtszuständen optimiert und damit die Möglichkeit geschaffen zeitliche Abhängigkeiten mit vertretbarem Berechnungsaufwand zu beschreiben. Zusätzlich können mechanische Beanspruchungen als Folge von Kristallisationsvorgängen zumindest qualitativ vorhergesagt werden. Im Folgenden werden eine Übersicht der implementierten Berechnungsmodelle sowie drei Anwendungsbeispiele von AStra vorgestellt.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.