Manipulating fluid transport in microfluidic, paper-based analytical devices (μPADs) is an essential prerequisite to enable multiple timed analytical steps on the same device. Current methods to control fluid distribution mainly rely on controlling how slowly the fluid moves within a device or by activating an on/off switch to flow. In this Article, we present an easy approach for programming fluid transport within paper-based devices that enables both acceleration as well as delay of fluid transport without active pumping. Both operations are programmed by carving open channels either longitudinally or perpendicularly to the flow path using a craft-cutting tool equipped with a knife blade. Channels are crafted after μPADs fabrication enabling the end user to generate patterns of open-channels on demand by carving the porous material of the paper without cutting or removing the paper substrate altogether. Parameters to control the acceleration or delay of flow include the orientation, length, and number of open channels. Using this method, accelerated as well as reduced fluid transport rates were achieved on the same device. This methodology was applied to μPADs for multiple and time-programmable assays for metal ion determination.
A new method has been developed for the ultrasensitive determination of silver, gold, and iron oxide nanoparticles in environmental samples. Cloud point extraction was optimized and used as a means to extract and preconcentrate all nanoparticle species simultaneously from the same sample. The extracted nanoparticles were sequentially isolated from the surfactant-rich phase by a new selective back-extraction procedure and dissociated into their precursor metal ions. Each ion solution was injected in a flow injection analysis (FIA) manifold, accommodating the chemiluminogenic oxidation of luminol, in order to amplify chemiluminescence (CL) emission in a manner proportional to its concentration. Under the optimum experimental conditions, the detection limits were brought down to the picomolar and femtomolar concentration levels with satisfactory analytical features in terms of precision (2.0-13.0%), selectivity against dissolved ions, and recoveries (74-114%). The method was successfully applied to the determination of iron oxide, silver, and gold nanoparticles in environmental samples of different complexity, ranging from unpolluted river water to raw sewage. The developed method could also serve as a basis for future deployment of molecular spectrometry detectors for the selective determination and speciation analysis of nanoparticles in environmental applications.
The intrinsic peroxidase-like activity of rhodium nanoparticles (RhNPs) and their use as catalytic labels for sensitive colorimetric assays is presented. RhNPs catalyze the oxidation of the peroxidase substrate 3,3,5,5-tetramethylbenzidine (TMB) in the presence of HO to produce a blue reaction product with a maximum absorbance at 652 nm. Kinetic studies show catalysis to follow Michaelis-Menten kinetics and a "ping-pong" mechanism. The calculated kinetic parameters indicate high affinity of RhNPs for both the substrate TMB and HO. In fact, they are better than other peroxidase mimicking nanomaterials and even the natural enzyme horseradish peroxidase. On the other hand, RhNPs exhibit no reactivity towards saccharides, thiols, amino acids and ascorbic acid. Based on these findings, a sensitive and selective colorimetric method was worked out for the determination of HO in real samples with a linear response in the 1-100 μM concentration range. By employing glucose oxidase, the glucose assay has a linear range that covers the 5 to 125 μM glucose concentration range. The detection limits are <0.75 μM for both species. The methods were applied to the determination of HO in spiked pharmaceutical formulations, and of glucose in soft drinks and blood plasma. Figures of merit include (a) good accuracy (with errors of <6%), (b) high recoveries (96.5-103.7%), and (c) satisfactory reproducibility (<6.3%). Graphical abstract Rhodium nanoparticles catalyze the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) in the presence of HO to produce a blue reaction product. The effect is exploited in photometric assays for hydrogen peroxide and glucose.
The phase separation of lamellar vesicles of anionic surfactants in aqueous solutions and its application as a novel liquid coacervate extraction procedure was examined. Solutions of lauric acid sodium salt separate into two phases in the presence of alkaline earth metals and a water miscible cosurfactant. It is proven that the surfactant phase is built of a perplexed network of multilamellar vesicles consisting of densely packed bilayers. Several factors affecting the formation of this new phase as well as its analytical utility in the preconcentration of metallic ions were assessed on the basis of better exploitation of this new nonspecific extraction technique. In essence, although the procedure to arrive at the optimum conditions seems laborious, the delivered method is straightforward, alleviating the requirement for prereaction with a complexing agent and highly reproducible under the optimum experimental conditions. As an analytical demonstration, the method was successfully applied to the determination of Cd(2+) and Zn(2+) in natural waters. Recoveries were higher than 95%, and detection limits as low as 3 microg L(-)(1) were accomplished by preconcentrating only 10 mL of sample volume in the presence of 0.45% (w/v) anionic surfactant.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.