The synthesis of catalysis-relevant nanoparticles such as platinum and gold is demonstrated with productivities of 4 g h(-1) for pulsed laser ablation in liquids (PLAL). The major drawback of low productivity of PLAL is overcome by utilizing a novel ultrafast high-repetition rate laser system combined with a polygon scanner that reaches scanning speeds up to 500 m s(-1). This high scanning speed is exploited to spatially bypass the laser-induced cavitation bubbles at MHz-repetition rates resulting in an increase of the applicable, ablation-effective, repetition rate for PLAL by two orders of magnitude. The particle size, morphology and oxidation state of fully automated synthesized colloids are analyzed while the ablation mechanisms are studied for different laser fluences, repetition rates, interpulse distances, ablation times, volumetric flow rates and focus positions. It is found that at high scanning speeds and high repetition rate PLAL the ablation process is stable in crystallite size and decoupled from shielding and liquid effects that conventionally occur during low-speed PLAL.
This Minireview aims to give an introduction to beryllium chemistry for all less-experienced scientists in this field of research. Up to date information on the toxicity of beryllium and its compounds are reviewed and several basic and necessary guidelines for a safe and proper handling in modern chemical research laboratories are presented. Interesting phenomenological observations are described that are related directly to the uniqueness of this element, which are also put into historical context. Herein we combine the contributions and experiences of many scientist that work passionately in this field. We want to encourage fellow scientists to reconcile the long-standing reservations about beryllium and its compounds and motivate intense research on this spurned element. Who on earth should be able to deal with beryllium and its compounds if not chemists?
Crystalline Co 3 O 4 nanoparticles with a uniform size of 9 nm as shown by Xray diffraction (XRD) and transmission electron microscopy (TEM) were synthesized by thermal decomposition of cobalt acetylacetonate in oleyl amine and applied in the oxidation of 2-propanol after calcination. The catalytic properties were derived under continuous flow conditions as function of temperature up to 573 K in a fixed-bed reactor at atmospheric pressure. Temperature-programmed oxidation, desorption (TPD), surface reaction (TPSR) and 2-propanol decomposition experiments were performed to study the interaction of 2-propanol and O 2 with the exposed spinel surfaces. Co 3 O 4 selectively catalyzes the oxidative dehydrogenation of 2-propanol yielding acetone and H 2 O and only to a minor extent the total oxidation to CO 2 and H 2 O at higher temperatures. The high catalytic activity of Co 3 O 4 reaching nearly full conversion with 100% selectivity to acetone at 440 K is attributed to the high amount of active Co 3+ species at the catalyst surface as well as surface-bound reactive oxygen species observed in the O 2 TPD, 2-propanol TPD, TPSR, and 2-propanol decomposition experiments. Density functional theory calculations with a Hubbard U term support the identification of fivefold coordinated octahedral surface as the active site, Co 3 + 5c and oxidative dehydrogenation involving adsorbed atomic oxygen was found to be the energetically most favored pathway. The consumption of surface oxygen and reduction of
Identifying the intrinsic electrocatalytic activity of nanomaterials is challenging, as their characterization usually requires additives and binders whose contributions are difficult to dissect. Herein, we use nano impact electrochemistry as an additive-free method to overcome this problem. Due to the efficient mass transport at individual catalyst nanoparticles, high current densities can be realized. High-resolution bright-field transmission electron microscopy and selected area diffraction studies of the catalyst particles before and after the experiments provide valuable insights in the transformation of the nanomaterials during harsh oxygen evolution reaction (OER) conditions. We demonstrate this for 4 nm sized CoFe 2 O 4 spinel nanoparticles. It is revealed that these particles retain their size and crystal structure even after OER at current densities as high as several kA•m −2 . The steady-state current scales with the particle size distribution and is limited by the diffusion of produced oxygen away from the particle. This versatilely applicable method provides new insights into intrinsic nanocatalyst activities, which is key to the efficient development of improved and precious metal-free catalysts for renewable energy technologies.
Highly active, structurally disordered CoFe2O4/CoO electrocatalysts are synthesized by pulsed laser fragmentation in liquid (PLFL) of a commercial CoFe2O4 powder dispersed in water. A partial transformation of the CoFe2O4 educt to CoO is observed and proposed to be a thermal decomposition process induced by the picosecond pulsed laser irradiation. The overpotential in the OER in aqueous alkaline media at 10 mA cm−2 is reduced by 23% compared to the educt down to 0.32 V with a Tafel slope of 71 mV dec−1. Importantly, the catalytic activity is systematically adjustable by the number of PLFL treatment cycles. The occurrence of thermal melting and decomposition during one PLFL cycle is verified by modelling the laser beam energy distribution within the irradiated colloid volume and comparing the by single particles absorbed part to threshold energies. Thermal decomposition leads to a massive reduction in particle size and crystal transformations towards crystalline CoO and amorphous CoFe2O4. Subsequently, thermal melting forms multi-phase spherical and network-like particles. Additionally, Fe-based layered double hydroxides at higher process cycle repetitions emerge as a byproduct. The results show that PLFL is a promising method that allows modification of the structural order in oxides and thus access to catalytically interesting materials.
Sub-10 nm CoFe2O4 nanoparticles with different sizes and various compositions obtained by (partial) substitution of Co with Ni cations have been synthesized by using a one-pot method from organic solutions by the decomposition of metal acetylacetonates in the presence of oleylamine. The electrocatalytic activity of CoFe2O4 towards the oxygen evolution reaction (OER) is clearly enhanced with a smaller size (3.1 nm) of the CoFe2O4 nanoparticles (compared with 4.5 and 5.9 nm). In addition, the catalytic activity is improved by partial substitution of Co with Ni, which also leads to a higher degree of inversion of the spinel structure. Theoretical calculations attribute the positive catalytic effect of Ni owing to the lower binding energy differences between adsorbed O and OH compared with pure cobalt or nickel ferrites, resulting in higher OER activity. Co0.5Ni0.5Fe2O4 exhibited a low overpotential of approximately 340 mV at 10 mAcm-2, a smaller Tafel slope of 51 mVdec-1, and stability over 30 h. The unique tunability of these CoFe2O4 nanocrystals provides great potential for their application as an efficient and competitive anode material in the field of electrochemical water splitting as well as for systematic fundamental studies aiming at understanding the correlation of composition and structure with performance in electrocatalysis
Cation substitution in transition metal oxides is an important approach to improve electrocatalysts by the optimization of their composition. Herein, we report on phase-pure spinel-type CoV2-xFexO4 nanoparticles with 0 ≤ x ≤ 2 as a new class of bi-functional catalysts for the oxygen evolution (OER) and oxygen reduction reactions (ORR). The mixed-metal oxide catalysts exhibit high catalytic activity for both OER and ORR that strongly depends on the V and Fe content. CoV2O4 is known to exhibit a high conductivity, while in CoFe2O4 the cobalt cation distribution is expected to change due to the inversion of the spinel structure. The optimised catalyst, CoV1.5Fe0.5O4, shows an overpotential for OER of ~300 mV for 10 mA cm-2 with a Tafel slope of 38 mV dec-1 in alkaline electrolyte. DFT+U+SOC calculations on cation ordering confirm the tendency towards the inverse spinel structure with increasing Fe concentration in CoV2-xFexO4 that starts to dominate already at low Fe contents. The theoretical results also show that the variation of oxidation states are related to the surface region, where the redox activity was found experimentally to be manifested in the transformation of V3+ → V2+. The high catalytic activity, facile synthesis, and low cost of the CoV2-xFexO4 nanoparticles render them very promising for application in bifunctional electrocatalysis
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.