As a regional metamorphic rock, the engineering properties of the phyllite are rather complex. It is common that the tunnel construction safety has tremendous difficulty due to the groundwater, the initial stress state, joints, cracks and faults and other factors, so it is necessary to find an effective construction method for the construction of phyllite tunnel. To master the regular pattern of the influence of relative factors on physical and mechanical properties of phyllite is the basis to establish an effective construction method. The paper tries to analyze the influence of water and mineral composition on physical and mechanical properties of phyllite by making relevant tests on Lu Lin tunnel, and hope to give some clue to the design and construction of phyllite tunnels.
The hydraulic fracturing method is a common method to measure the ground stress. This article describes the principles of the hydraulic fracturing method, studies the distribution and the value of the ground stress in a tunnel area with the hydraulic fracturing method, and predicts rock burst by using the Russenes discriminance and the Turchaninov discriminance. The results show that the maximum horizontal stress is between 4.7MPa and 11.1MPa, and the minimum horizontal stress is between 4.0MPa and 8.0MPa. The maximum horizontal stress direction of the drilling is between N63 °W and N72 °W, and it is not conducive to the stability of the tunnel surrounding rocks because the large angle intersection of the tunnel axis direction and the maximum horizontal stress direction.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.