No abstract

The influence of the pulse duration on the mechanical effects following laser-induced breakdown in water was studied at pulse durations between 100 fs and 100 ns. Breakdown was generated by focusing laser pulses into a cuvette containing distilled water. The pulse energy corresponded to 6-times breakdown threshold energy. Plasma formation and shock wave emission were studied photographically. The plasma photographs show a strong influence of self-focusing on the plasma geometry for femtosecond pulses. Streak photographic recording of the shock propagation in the immediate vicinity of the breakdown region allowed the measurement of the near-field shock pressure. At the plasma rim, shock pressures between 3 and 9 GPa were observed for most pulse durations. The shock pressure rapidly decays proportionally to r−(2⋯3) with increasing distance r from the optical axis. At a 6 mm distance of the shock pressure has dropped to (8.5±0.6) MPa for 76 ns and to <0.1 MPa for femtosecond pulses. The radius of the cavitation bubble is reduced from 2.5 mm (76 ns pulses) to less than 50 μm for femtosecond pulses. Mechanical effects such as shock wave emission and cavitation bubble expansion are greatly reduced for shorter laser pulses, because the energy required to produce breakdown decreases with decreasing pulse duration, and because a larger fraction of energy is required to overcome the heat of vaporization with femtosecond pulses.

An analytic, first-order model has been developed to calculate irradiance thresholds for laser-induced breakdown (LIB) in condensed media, including ocular and aqueous media. A complete derivation and description of the model was given in a previous paper (Part I). The model has been incorporated into a computer code and code results have been compared to experimentally measured irradiance thresholds for breakdown of ocular media, saline, and water by nanosecond, picosecond, and femtosecond laser pulses in the visible and near-infrared. The comparison included both breakdown data from the literature and from our own measurements. Theoretical values match experiment to within a factor of 2 or better, over a range of pulsewidths spanning five orders of magnitude.

Random lasers are a developing class of light sources that utilize a highly disordered gain medium as opposed to a conventional optical cavity. Although traditional random lasers often have a relatively broad emission spectrum, a random laser that utilizes vibration transitions via Raman scattering allows for an extremely narrow bandwidth, on the order of 10 cm−1. Here we demonstrate the first experimental evidence of lasing via a Raman interaction in a bulk three-dimensional random medium, with conversion efficiencies on the order of a few percent. Furthermore, Monte Carlo simulations are used to study the complex spatial and temporal dynamics of nonlinear processes in turbid media. In addition to providing a large signal, characteristic of the Raman medium, the random Raman laser offers us an entirely new tool for studying the dynamics of gain in a turbid medium.

The shielding effectiveness of laser-induced breakdown from focused, visible laser pulses from 5 ns to 125 fs is determined from measurements of transmission of energy through the focal volume. The shielding efficiency decreases as a function of pulse duration from 5 ns to 300 fs and increases from 300 fs to 125 fs. The results are compared with past studies at similar pulse durations. The results of the measurements support laser-induced breakdown models and may lead to an optimization of laser-induced breakdown in ophthalmic surgery by reduction of collateral effects.