Crystal orientations in multiple orders correlate to the properties of polycrystalline materials, and it is critical to manipulate these microstructural arrangements to enhance device performance. Herein, we report a controllable approach to manipulate the facet orientation within the ABX3 hybrid perovskites polycrystalline films by cation cascade doping at A-site. Two-dimensional synchrotron radiation grazing incidence wide-angle X-ray scattering is employed to probe the crystal orientations in multiple orders in mixed perovskites thin films, revealing a general pattern to guide crystal planes stacking upon extrinsic doping during crystallization. Different from previous studies, this method enables to adjust the crystal stacking mode of certain crystallographic planes in polycrystalline perovskites. Moreover, the preferred facet orientation is found to facilitate photocarrier transport across the absorber and pertaining interface in the resultant PV device, which provides an exemplary paradigm for further explorations that relate to the microstructures of hybrid perovskite materials and relevant optoelectronics.
Organic-inorganic perovskite solar cells have recently emerged at the forefront of photovoltaics research. Here, for the first time, graphdiyne (GD), a novel two dimension carbon material, is doped into PCBM layer of perovskite solar cell with an inverted structure (ITO/PEDOT:PSS/CH3NH3PbI(3-x)Cl(x)/PCBM:GD/C60/Al) to improve the electron transport. The optimized PCE of 14.8% was achieved. Also, an average power conversion efficiency (PCE) of PCBM:GD-based devices was observed with 28.7% enhancement (13.9% vs 10.8%) compared to that of pure PCBM-based ones. According to scanning electron microscopy, conductive atomic force microscopy, space charge limited current, and photoluminescence quenching measurements, the enhanced current density and fill factor of PCBM:GD-based devices were ascribed to the better coverage on the perovskite layer, improved electrical conductivity, strong electron mobility, and efficient charge extraction. Small hysteresis and stable power output under working condition (14.4%) have also been demonstrated for PCBM:GD based devices. The enhanced device performances indicated the improvement of film conductivity and interfacial coverage based on GD doping which brought the high PCE of the devices and the data repeatability. In this work, GD demonstrates its great potential for applications in photovoltaic field owing to its networks with delocalized π-systems and unique conductivity advantage.
In the past few years, hybrid organic-inorganic perovskite solar cells (PSCs) have been widely investigated and the power conversion efficiency (PCE) rocket-boosted from 3.8% to 23.7%, [1] originating from the excellent properties of perovskite materials such as appropriate and adjustable bandgap, high absorption coefficient, good charge carrier mobility, long carrier diffusion length, low recombination rate, and high tolerance of chemical defects. [2] Among various compositions, hybrid organic-inorganic PSCs based on mixed-cation formamidinium/methylammonium (FA/MA) perovskites have been attractive not only due to higher efficiency, but also better thermal stability, higher phase stability and more robust long-term stability than the FA cation or MA cation only counterparts. [3] For instance, MA cation only perovskite, i.e., MAPbI 3 , has a very low tetragonal-to-cubic phase transformation temperature of about 60 °C. FA Crystal orientation has a great impact on the properties of perovskite films and the resultant device performance. Up to now, the exquisite control of crystal orientation (the preferred crystallographic planes and the crystal stacking mode with respect to the particular planes) in mixed-cation perovskites has received limited success, and the underlying mechanism that governs device performance is still not clear. Here, a thermodynamically favored crystal orientation in formamidinium/methylammonium (FA/MA) mixed-cation perovskites is finely tuned by composition engineering. Density functional theory calculations reveal that the FA/MA ratio affects the surface energy of the mixed perovskites, leading to the variation of preferential orientation consequently. The preferable growth along the (001) crystal plane, when lying parallel to the substrates, affects their charge transportation and collection properties. Under the optimized condition, the mixed-cation perovskite (FA 1-x MA x PbI 2.87 Br 0.13 (Cl)) solar cells deliver a champion power conversion efficiency over 21%, with a certified efficiency of 20.50 ± 0.50%. The present work not only provides a vital step in understanding the intrinsic properties of mixed-cation perovskites but also lays the foundation for further investigation and application in perovskite optoelectronics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.