None of the NiTi systems was able to instrument completely the entire root canal. Reciprocation and Adaptive Motions were found to cut dentine efficiently to full working length, with no procedural errors. The TF Adaptive system maintained the original canal anatomy with less canal transportation and better centring ability.

This study shows the efficiency of carrier-based obturation systems in filling root canals hermetically. It compares new adhesive endodontic materials with the traditional gold standard gutta-percha. Results show the good sealing ability of both techniques making them appropriate to use in daily endodontic obturations.

Although X-radiography has been widely used in studies of damage in composite materials, micro-tomography has received less attention, due to the high cost and limited availability of equipment. However, micro-tomographic analysis is a powerful tool, allowing 3D images of sections through sandwich materials to be obtained without specimen preparation. Four examples from a recent study are presented here, which show how micro-tomography can provide unique information on the quality of honeycomb sandwich structures, information on damage mechanisms and internal details of through thickness reinforcement in pinned foam cores.

Objectives: The present study aimed in assessing the coronal defects after access cavity finishing and refinement by micro. Methods: Access cavities on thirty molars were prepared using a diamond bur. To finish and refine the access cavity, the Endo-Z was used in group 1 (n=15) and Start X 1 in group 2. Preparation time was recorded. A micro-CT scan was done before and after access preparation. Formation and location of the new defects were registered, the extension of defects calculated and the direction of the extension registered, preparation time and surface roughness determined ( P < 0.05). Results: Preparation time was significantly higher with ultrasonics ( P <0.001). Internal walls showed smoother surfaces for Endo-Z group. Newly counts and extension length of defects weren't significantly different between groups ( P > .05). Conclusion: Ultrasonic tips induced new cracks. Both instruments caused the extension of cracks. Ultrasonic tips requires more time and results in significantly rougher surfaces.

Aim:The aim of this study is to evaluate the influence of final canal taper on the sealing ability of Thermafil by using microcomputed tomography (micro-CT). Materials and methods:Fifty-four single-rooted teeth were instrumented to apical size 40 taper 4, 6 and 8%. Teeth were divided into three groups. All teeth were filled with Thermafil (Dentsply,Tulsa Dental Products). Using micro-CT, roots were scanned and volume measurements of voids at 1, 3 and 5 mm from the apex were calculated using specialized CT software. Measurements were analyzed statistically with ANOVA followed by Bonferroni multiple comparison correction.Results: Data analysis showed that 0.08 preparations provided better results than 0.06 and 0.04% tapered samples especially at 1 mm from the apex. Mean percentage of voids were significantly higher with Thermafil taper 0.06% (p = 0.05). None of the root canals filled teeth were gap free. Root canal preparations with bigger taper exhibited less voids than smaller tapered preparations.Clinical significance: In our daily practice, enlarging the apical third (last 3 mm) of root canals to an 8% taper gives a better sealing ability and thus long-term success for our root canal obturations.