In the modern age of nanotechnology, the discovery of graphene has opened up the way to study and develop of several novel 2D materials. The unique physical and chemical properties of 2D materials have enhanced their research, making them superior to the commercial bulk materials used in various applications. Efforts have been made in the current study to present an overview of the intrinsic properties of these materials. Furthermore, synthesis and applications are also reviewed and discussed. Finally, the future outlook of 2D materials is discussed to enhance the research and performance of these materials, which can result in broader applications benefitting the electrical and electronics industries and society. Intensive research into 2D materials is expected to lead to the discovery of new materials with enhanced properties that will benefit the industry and society at large.

This investigation is carried out to understand the effects of water absorption on the mechanical properties of hybrid phenol formaldehyde (PF) composite fabricated with Areca Fine Fibres (AFFs) and Calotropis Gigantea Fibre (CGF). Hybrid CGF/AFF/PF composites were manufactured using the hand layup technique at varying weight percentages of fibre reinforcement (25, 35 and 45%). Hybrid composite having 35 wt.% showed better mechanical properties (tensile strength ca. 59 MPa, flexural strength ca. 73 MPa and impact strength 1.43 kJ/m2) under wet and dry conditions as compared to the other hybrid composites. In general, the inclusion of the fibres enhanced the mechanical properties of neat PF. Increase in the fibre content increased the water absorption, however, after 120 h of immersion, all the composites attained an equilibrium state.

No abstract

No abstract

No abstract

No abstract

No abstract

In this paper the trustworthiness of the existing theory for predicting the FRP contribution to the shear resistance of reinforced concrete beams is discussed. The most well-known shear models for EBR (External Bonded Reinforcement) are presented, commented on and compared with an extensive experimental database. The database contains the results from more than 200 tests performed in different research institutions across the world. The results of the comparison are not very promising and the use of the additional principle in the actual shear design equations should be questioned. The large scatter between the predicted values of different models and experimental results is of real concern bearing in mind that some of the models are used in present design codes.