We have developed an instrument for surface interaction studies, which combines a newly invented four detector optical reflectometry setup with quartz crystal microbalance with dissipation (QCM-D) monitoring. The design is such that data from both techniques can be obtained simultaneously on the same sensor surface, with the same signal-to-noise ratio and time resolution, as for the individual techniques. In addition, synchronized information about structural transformations, molecular mass, and the hydration of thin films on solid surfaces can be obtained on the same specimen, as validated by monitoring the formation of supported lipid bilayers on a silica-coated QCM sensor surface. We emphasize that the optical (molecular) mass can be separated from the acoustic mass including hydrodynamically coupled solvent, which means, in turn, that the amount of solvent sensed by the QCM-D technique can be dynamically resolved during adsorption processes. In addition, the advantage/necessity to use four, compared to two, detector reflectometry is emphasized.

No abstract

Screening assays designed to probe ligand and drug-candidate regulation of membrane proteins responsible for ion-translocation across the cell membrane are wide spread, while efficient means to screen membrane-protein facilitated transport of uncharged solutes are sparse. We report on a microfluidic-based system to monitor transport of uncharged solutes across the membrane of multiple (>100) individually resolved surface-immobilized liposomes. This was accomplished by rapidly switching (<10 ms) the solution above dye-containing liposomes immobilized on the floor of a microfluidic channel. With liposomes encapsulating the pH-sensitive dye carboxyfluorescein (CF), internal changes in pH induced by transport of a weak acid (acetic acid) could be measured at time scales down to 25 ms. The applicability of the set up to study biological transport reactions was demonstrated by examining the osmotic water permeability of human aquaporin (AQP5) reconstituted in proteoliposomes. In this case, the rate of osmotic-induced volume changes of individual proteoliposomes was time resolved by imaging the self quenching of encapsulated calcein in response to an osmotic gradient. Single-liposome analysis of both pure and AQP5-containing liposomes revealed a relatively large heterogeneity in osmotic permeability. Still, in the case of AQP5-containing liposomes, the single liposome data suggest that the membrane-protein incorporation efficiency depends on liposome size, with higher incorporation efficiency for larger liposomes. The benefit of low sample consumption and automated liquid handling is discussed in terms of pharmaceutical screening applications.

A novel substrate for preparation of supported lipid bilayers (SLBs), smooth at the subnanometer scale and of variable thickness from ten to several hundred nanometers, was developed by surface oxidation of spin-coated poly(hydroxymethylsiloxane) (PHMS) films. The deposited polymeric thin films were modified by a combination of oxygen plasma and thermal treatment (PHMS(ox)), in order to convert the outermost surface layer of the polymer film to a stable SiO(2) film, suitable for SLB formation. The hydrophilic, SiO(2)-like surfaces were characterized by XPS, wetting angle, ellipsometry, and AFM. Lipid bilayers were formed on this surface using the well-known vesicle adsorption-rupture-fusion process, usually performed on glass or vapor-deposited SiO(2). Reproducible formation of homogeneous SLBs of different compositions (POPC, DOEPC, and POPC/DOPS) was demonstrated on the new SiO(2) surface by quartz crystal microbalance with dissipation (QCM-D), surface plasmon resonance (SPR), and optical reflectometry measurements. The SLB formation kinetics on the PHMS(ox)-coated sensors showed very similar characteristics, for all investigated PHMS thicknesses, as on reference sensors coated with vapor-deposited SiO(2). The good adhesive properties of the PHMS to gold allows for the preparation of thin PHMS(ox) layers compatible with SPR. The much smaller roughness at the nanometer scale of the PHMS(ox) surfaces, compared to standard vapor-deposited SiO(2)-coated sensors, makes them advantageous for AFM and optical experiments and promising for patterning. To benefit optical experiments with the PHMS(ox) surfaces, it was also investigated how the PHMS film thickness influences the SPR and reflectometry responses upon SLB formation.

A novel device for nanometer-confinement of soft matter in one dimension (1D) is presented. This nanocell, with very large (up to 10(6):1) cell-radius to cell-height ratio, is tailored as an accessory for quartz crystal microbalance (QCM) and QCM with dissipation-monitoring (QCM-D) sensing to study internal and interfacial energy dissipation phenomena in highly confined (in 1D) soft matter and fluid films (patent pending). The cell consists of two macroscopic plates (diameter of 9 mm), a top (the "lid") and a bottom (the QCM-D sensor), separated by appropriate spacers with heights ranging from below 100 nm up to 10 microm. The surfaces of both the lid and the bottom plate can be mechanically or/and chemically modified, prior to cell assembly, in order to tailor desired interfacial properties for the experiment. The cell is mounted on a standard QCM-D sensor, an AT-cut quartz crystal (the quartz crystal is cut at an angle of 35 degrees from its ZX-plane), forming the bottom plate. We illustrate theoretically and experimentally, as application examples, the use of this device for studies of dynamic mass loading and internal energy dissipation processes in thin films of ethylene glycol respective thin liquid crystal films around the nematic-isotropic phase transition.