Seismic-reflection techniques have been applied in several studies over the last 20 years as a uranium-exploration tool within the Athabasca Basin and have been utilized to provide the larger structural context for known uranium deposits within the basin. At the crustal scale, deposits within the eastern Athabasca Basin are shown to be associated with deep-seated shear zones that originated during Trans-Hudson orogeny and have subsequently been reactivated during and subsequent to deposition of the basin-fill sandstones. Seismic properties of the Athabasca sandstones and underlying basement have been determined through in situ borehole measurements. Reflectivity within the sandstones is generally weak. Seismically recognizable signatures are primarily associated with variations in fracture density, porosity, and degree of silicification. The basement unconformity and regolith, a prime target of exploration, is widely imaged as it is characterized by variable but generally distinct reflectivity. Results from the McArthur River mine site suggest that the spatial coincidence of seismically imaged high-velocity zones and deep-seated faults that offset the unconformity may be a more broadly applicable exploration targeting tool. Three-dimensional (3-D) seismic imaging near existing ore zones can define the local structural controls on the mineralization and point the way to new targets, thus leading to more efficient exploration drilling programs. Furthermore, seismically generated structural maps of the unconformity and rock competence properties may play a significant role at the outset of mine planning.

The Millennium uranium deposit is located within the Athabasca Basin, in northern Saskatchewan, Canada. The deposit is hosted within moderately dipping Paleoproterozoic gneisses that are unconformably overlain by more than 500 m of flat lying, porous Paleoproterozoic to late Mesoproterozoic Athabasca Group sandstones. The deposit is associated with the sandstone-basement unconformity, post-Athabasca structure, and hydrothermal alteration. These features combine to create a complex 3D hydrogeologic setting that presents challenges with respect to mine development, production, and safety. In 2007, as part of a prefeasibility study for potential mine development, a seismic program consisting of a 3D surface survey, vertical seismic profiling, moving source profiling, and side-scan surveys was undertaken to map the complex geology. The geometry and resolution of these different seismic surveys allowed for direct imaging of the geologic targets of interest, regardless of orientation and size. After integration with drill-defined geology, the program successfully imaged the location and character of the unconformity, the post-Athabasca structural setting at camp and deposit scales, and the alteration around the deposit. This information increased the understanding of geotechnical aspects of the geology hosting the deposit, and is currently being used to help minimize risk and costs associated with mine development. Seismic surveys are now viewed as an integral part of risk reduction associated with mining in the Athabasca Basin.

Three-dimensional seismic reflection measurements have been used to assist mine planning at the Millennium uranium deposit, Canada. The deposit is located within the crystalline basement, separated from the overlying Athabasca Basin sediments by an unconformity potentially associated with significant fluid flow. The primary objective of the ∼6.5 km 2 survey was to image the unconformity and possible post-Athabasca deformation structures in and around the deposit. Clear unconformity reflections are observed within most of the survey area, although there are amplitude variations due to complex geology, including intense hydrothermal clay alteration around the deposit. Finite-difference modeling indicates that the wideangle character of the unconformity reflections is due to a gradual velocity increase at the unconformity. The reflections are obscured by large time delays, due to Quaternary sediments covering the area, making refraction static corrections crucial.The seismic interpretation shows large variations in the unconformity depth (from approximately 430 to 650 m), indicating a pronounced basement depression that coincides with a gravity low. Reflections from the unconformity are vague within the depression, especially in the vicinity of the deposit. Although the orebody is not directly visible in the seismic image, there is a lack of reflectivity coincident with the alteration surrounding the mineralization. We also observed reflections which likely originate at the contact between the altered and fresh basement rock located beneath the deposit. The seismic data further indicate post-Athabasca faults in the vicinity of the orebody. Based on the initial seismic interpretation, the depth of the crown pillar was adjusted and the mine infrastructure moved away from areas interpreted to be affected by the intense hydrothermal alteration surrounding the deposit. The capability to image the unconformity, post-Athabasca structure, and hydrothermal alteration also highlights the potential use of seismic surveys in uranium exploration.