This paper presents the latest results on confinement studies in the TJ-II stellarator. The inherently strong plasma–wall interaction of TJ-II has been successfully reduced after lithium coating by vacuum evaporation. Besides H retention and low Z, Li was chosen because there exists a reactor-oriented interest in this element, thus giving special relevance to the investigation of its properties. The Li-coating has led to important changes in plasma performance. Particularly, the effective density limit in NBI plasmas has been extended reaching central values of 8 × 1019 m−3 and T e ≈ 250–300 eV, with peaked density, rather flat T e profiles and higher ion temperatures. Due to the achieved density control, a second type of transition has been added to the low density ones previously observed in ECRH plasmas: higher density transitions characterized by the fall in Hα emission, the onset of steep density gradient and the reduction in the turbulence; which are characteristics of transition to the H mode. Confinement studies in ECH plasmas indicate that lowest order magnetic resonances, even in a low shear environment, locally reduce the effective electron heat diffusivities, while Alfven eigenmodes destabilized in NBI plasmas can influence fast ion confinement.

This paper presents an overview of experimental results and progress made in investigating the link between magnetic topology, electric fields and transport in the TJ-II stellarator. The smooth change from positive to negative electric field observed in the core region as the density is raised is correlated with global and local transport data. A statistical description of transport is emerging as a new way to describe the coupling between profiles, plasma flows and turbulence. TJ-II experiments show that the location of rational surfaces inside the plasma can, in some circumstances, provide a trigger for the development of core transitions, providing a critical test for the various models that have been proposed to explain the appearance of transport barriers in relation to magnetic topology. In the plasma core, perpendicular rotation is strongly coupled to plasma density, showing a reversal consistent with neoclassical expectations. In contrast, spontaneous sheared flows in the plasma edge appear to be coupled strongly to plasma turbulence, consistent with the expectation for turbulent driven flows. The local injection of hydrocarbons through a mobile limiter and the erosion produced by plasmas with well-known edge parameters opens the possibility of performing carbon transport studies, relevant for understanding co-deposit formation in fusion devices.

The effects of 3D geometry are explored in TJ-II from two relevant points of view: neoclassical transport and modification of stability and dispersion relation of waves. Particle fuelling and impurity transport are studied considering the 3D transport properties, paying attention to both neoclassical transport and other possible mechanisms. The effects of the 3D magnetic topology on stability, confinement and Alfvén Eigenmodes properties are also explored, showing the possibility of controlling Alfvén modes by modifying the configuration; the onset of modes similar to geodesic acoustic modes are driven by fast electrons or fast ions; and the weak effect of magnetic well on confinement. Finally, we show innovative power exhaust scenarios using liquid metals.

This paper presents the last results on confinement studies in the TJ-II stellarator. The research of the dependence of spatially resolved transport coefficients on plasma parameters for ECH plasmas with Boronised wall shows that the heat confinement increases linearly with density while particle confinement increases sharply a factor four above a certain density threshold associated with the positive electric field. Remarkably, lowest order magnetic resonances, even in a low shear environment, reduce locally the effective diffusivities. The inherently strong plasma wall interaction of TJ-II has been successfully reduced after Lithium coating by vacuum evaporation. Besides H-retention and low Z, Li was chosen because there exists a reactor-oriented interest in this element, thus giving especial interest to the investigation of its properties. The Li-coating has led to important changes in plasma performance. Particularly, the effective density limit in NBI plasmas has been extended reaching central values of 8 x 10 19 m-3 and Te≈250-300 eV, with peaked density, rather flat Te profiles and increased ion temperatures. Alfvén modes are destabilised and their influence on fast ion confinement is studied in NBI discharges. Due to the achieved density control, a second type of transitions has been added to the low density ones previously observed in boronised wall. The high density transitions, under NBI with Li-coated walls are characterised by the fall of Hα emission, the onset of steep density gradient, and the reduction of the turbulence, which are characteristics of transition to H mode. TJ-II is therefore a unique device where first and second order phase transitions can be investigated.

No abstract