No abstract

No abstract

A sensor system, developed in a previous laboratory study [ , is used to obtain the spatial distribution of electrical conductivity within the cover-zone of concrete specimens subjected to a range of natural exposure conditions. The testing methodology enables in-situ monitoring of the electrical conductivity and technical issues relating to site measurements are discussed. The work also highlights the need for continual monitoring of the covercrete as the electrical conductivity changes with time, depth and environment.

Ac impedance spectroscopy measurements are used to critically examine the end-to-end (two-point) testing technique employed in evaluating the bulk electrical resistivity of concrete. In particular, this paper focusses on the interfacial contact region between the electrode and specimen and the influence of contacting medium and measurement frequency on the impedance response. Two-point and four-point electrode configurations were compared and modelling of the impedance response was undertaken to identify and quantify the contribution of the electrode–specimen contact region on the measured impedance. Measurements are presented in both Bode and Nyquist formats to aid interpretation. Concretes mixes conforming to BSEN206-1 and BS8500-1 were investigated which included concretes containing the supplementary cementitious materials fly ash and ground granulated blast-furnace slag. A measurement protocol is presented for the end-to-end technique in terms of test frequency and electrode–specimen contacting medium in order to minimize electrode–specimen interfacial effect and ensure correct measurement of bulk resistivity.

No abstract