Increased proliferation of antimicrobial resistance and new strains of bacterial pathogens severely impact current health, environmental, and technological developments, demanding design of novel, highly efficient antibacterial agents. Ag, Cu monometallic and Ag/Cu bimetallic nanoparticles (NPs) were in situ grown on the surface of graphene, which was produced by chemical vapor deposition using ferrocene as precursor and further functionalized to introduce oxygen-containing surface groups. The antibacterial performance of the resulting hybrids was evaluated against Escherichia coli cells and compared through a series of parametrization experiments of varying metal type and concentration. It was found that both Ag- and Cu-based monometallic graphene composites significantly suppress bacterial growth, yet the Ag-based ones exhibit higher activity compared to that of their Cu-based counterparts. Compared with well-dispersed colloidal Ag NPs of the same metal concentration, Ag- and Cu-based graphene hybrids display weaker antibacterial activity. However, the bimetallic Ag/CuNP-graphene hybrids exhibit superior performance compared to that of all other materials tested, i.e., both the monometallic graphene structures as well as the colloidal NPs, achieving complete bacterial growth inhibition at all metal concentrations tested. This striking performance is attributed to the synergistic action of the combination of the two different metals that coexist on the surface as well as the enhancing role of the graphene support.

No abstract

No abstract

Design of novel and more efficient antibacterial agents is a continuous and dynamic process due to the appearance of new pathogenic strains and inherent resistance development to existing antimicrobial treatments. Metallic nanoparticles (NPs) are highly investigated, yet the role of released ions is crucial in the antibacterial activity of the NP-based systems. We developed herein ion-based, metal/graphene hybrid structures comprising surface-bound Ag and Cu mono-ionic and Ag/Cu bi-ionic species on functionalized graphene, without involvement of NPs. The antibacterial performance of the resulting systems was evaluated against Escherichia coli cells using a series of parametrization experiments of varying metal ion types and concentrations and compared with that of the respective NP-based systems. It was found that the bi-ionic Ag/Cu-graphene materials exhibited superior performance compared to that of the mono-ionic analogues owing to the synergistic action of the combination of the two different metal ions on the surface and the enhancing role of the graphene support, whereas all ion-based systems performed superiorly compared to their NP-based counterparts of the same metal type and concentration. In addition, the materials exhibited sustained action, as their activity was maintained after reuse in repeated cycles employing fresh bacteria in each cycle. The systems developed herein may open new prospects toward the development of novel, efficient, and tunable antibacterial agents by properly supporting and configuring metals in ionic form.

No abstract

Due to large energy requirements of the traditional gas separation processes, novel and less energy-intensive technologies, such as adsorption- and membrane-based ones, are anticipated to play major role in future industrial separations. Thus, finding new means for economical fabrication of materials related to these processes is of significant importance to facilitate their implementation in large-scale operations. In this work, we synthesized high-quality activated porous carbons (AC) and carbon nanotube (CNT) membranes using asphaltene, an abundant waste of the petroleum industry. The resulting materials were tested for CO2 separation in adsorption and membrane modes. Among the various porous carbons produced, AC from raw asphaltene reached a CO2 sorption capacity of 7.56 mmol/g at 4 bar and 25 °C with a relatively low heat of adsorption (up to 23 kJ/mol) implying low energy requirement for regeneration. The versatility of the asphaltene precursors in the formation of carbon nanomaterials was also demonstrated by growing, for the first time, CNT membranes via template-based, catalyst-free carbonization of asphaltene inside the pores of anodized alumina. The resulting CNT membranes attained a promising separation performance with permeability ratios exceeding the respective Knudsen values for H2/CO2, N2/CO2, N2/CH4, and H2/CH4 gas pairs.

Open-ended, multi-wall carbon nanotubes (CNTs) with magnetic nanoparticles encapsulated within their graphitic walls (magCNTs) were fabricated by a combined action of templated growth and a ferrofluid catalyst/carbon precursor, and tested as drug hosts. The hybrid nanotubes are stable under extreme pH conditions due to particle protection provided by the graphitic shell. The magCNTs are promising for high capacity drug loading given that the magnetic functionalization did not block any of the active sites available for drug attachment, either from the CNT internal void or on the internal and external surfaces. This is in contrast to typical approaches of loading CNTs with particles that proceed through surface attachment or capillary filling of the tube interior. Additionally, the CNTs exhibit enhanced hydrophilic character, as shown by water adsorption measurements, which make them suitable for biological applications. The morphological and structural characteristics of the hybrid CNTs are evaluated in conjunction to their magnetic properties and ability for drug loading (diaminophenothiazine). The fact that the magnetic functionality is provided from 'inside the walls' can allow for multimode functionalization of the graphitic surfaces and makes the magCNTs promising for targeted therapeutic applications.

Growth of few-layer graphene using ferrocene as precursor by chemical vapor deposition is reported. The growth did not involve any additional carbon or catalyst source or external hydrocarbon gases. Parametric investigation was performed using different conditions, namely, varying growth temperature from 600 to1000 °C, and growth duration from 5 min to 3 h, as well as using fast quenching or gradual cooling after the thermal treatment, in order to examine the effect on the quality of the produced graphene. The growth took place on silicon wafers and resulted, under optimal conditions, in formation of graphene with 2–3 layers and high graphitic quality, as evidenced by Raman spectroscopy, with characteristic full width at half maximum of the 2D band of 49.46 cm−1, and I2D/IG and ID/IG intensity ratios of 1.15 and 0.26, respectively. Atomic force microscopy and X-ray photoelectron spectroscopy were employed to further evaluate graphene characteristics and enlighten growth mechanism. Electrochemical evaluation of the developed material was performed using cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge-discharge measurements.