Magnesium diboride (MgB2) bulk superconductors may have practical applications as permanent magnets owing to their ability to trap larger fields than conventional ferromagnets and a transition temperature of 39 K that make them attractive for use in cryogen-free systems. Unlike the cuprate high temperature superconductors, grain boundaries in MgB2 act as pinning sites not weak links, and so show good current carrying ability in polycrystalline samples. This enables the materials to be processed using standard ceramic processing methods which are scalable to large diameters and mass production. The maximum trapped field in bulk superconductors scales with the critical current density (Jc ) of the material as well as the radius of the sample. To obtain the highest possible Jc values in MgB2 at high fields requires the bulk materials to be fully dense but fine-grained material, and possibly with a nano-scale distribution of non-superconducting impurity particles to further enhance pinning. Field assisted sintering technology (FAST) is a rapid process for obtaining dense ceramics from materials like MgB2 which are difficult to sinter with conventional pressure-less techniques. Rapid heat treatments are attractive both from a manufacturing point of view and because the total time that the sample is held at high temperature is short, limiting grain coarsening. In this paper, we report a systematic study of the influence of processing temperature on microstructure and superconducting properties of MgB2 bulks manufactured using FAST. We conclude that processing temperatures above 1000 °C are required to obtain materials that have sufficiently high electrical connectivity to generate large magnetic moments. However, the intrinsic (intragrain) Jc values in MgB2 are better in the samples processed at 900 °C owing to their finer scale microstructures and the MgB2 lattice being more defective.

Bulk superconductors can act as trapped-field magnets with the potential to be used for many applications such as portable medical magnet systems and rotating machines. Maximising the trapped field, particularly for practical magnetisation techniques such as pulsed field magnetisation (PFM), still remains a challenge. PFM is a dynamic process in which the magnetic field is driven into a superconducting bulk over milliseconds. This flux motion causes heating and a complex interplay between the magnetic and thermal properties. In this work, the local flux density during PFM in a MgB 2 bulk superconductor has been studied. We find that improving the cooling architecture increases the flux trapping capabilities and alters the flux motion during PFM. These improvements lead to the largest trapped field (0.95T) for a single MgB 2 bulk sample magnetised by a solenoidal pulsed field magnet. The findings illustrate the fundamental role bulk cooling plays during PFM.

MgB2 pellets containing a nanoscale dispersion of artificial pinning centres have been successfully manufactured through a powder metallurgy route based on the oxide dispersion strengthened (ODS) concept more usually used for steels and superalloys. Commercial MgB2 powder and Y2O3 nano-powder were mechanically alloyed in a high energy planetary ball mill and consolidated using the field assisted sintering technique. The composite powders were ball milled for different times up to 12 h and characterised by means of particle size analysis, x-ray diffraction (XRD) and scanning transmission electron microscopy (STEM). The microstructure and superconducting properties were characterised by density, XRD, STEM and magnetic property measurements. The powder microstructure comprised Y2O3 particles dissolved into the MgB2 matrix. After consolidation there was a near-uniform dispersion of precipitated YB4 and MgO particles. A bulk 0.5 wt% Y2O3-MgB2 composite showed the best superconducting performance with a significant improvement in J c at high field compared with unmodified MgB2, and only a small reduction in T c . The results suggest that the ODS concept is promising to improve the superconducting properties of MgB2.

Growth in the Li-ion battery market continues to accelerate, driven by increasing need for economic energy storage in the electric vehicle market. Electrode manufacture is the first main step in production and in an industry dominated by slurry casting, much of the manufacturing process is based on trial and error, know-how and individual expertise. Advancing manufacturing science that underpins Li-ion battery electrode production is critical to adding value to the electrode manufacturing value chain. Overcome the current barriers in the electrode manufacturing requires advances in material innovation, manufacturing technology, in-line process metrology and data analytics to improve cell performance, quality, safety and process sustainability. In this roadmap we present where fundamental research can impact advances in each stage of the electrode manufacturing process from materials synthesis to electrode calendering. We also highlight the role of new process technology such as dry processing and advanced electrode design supported through electrode level, physics-based modelling. To compliment this, the progresses in data driven models of full manufacturing processes is reviewed. For all the processes we describe, there is a growing need process metrology, not only to aid fundamental understanding but also to enable true feedback control of the manufacturing process. It is our hope this roadmap will contribute to this rapidly growing space and provide guidance and inspiration to academia and industry.

This work investigates a new processing method developed to improve the connectivity of ex-situ MgB2 bulks at low sintering temperatures. Mg additions (1 − 10 wt.%) were mixed to pre-synthesised MgB2 to make composite powders that were sintered at 900 ffiC by the Field Assisted Sintering Technique (FAST). Addition of 10 wt.% Mg resulted in a substantial increase in density from 68 to 79% and a dramatic reduction in MgB4from 11 to ∼ 0 wt.%. Pressure and dilatometry data recorded in-situ during the sintering process revealed that Mg additions led to different sintering mechanisms depending on the Mg fraction. For large Mg fractions (6 and 10 wt.%) a Mg liquid phase was formed and led to significant density improvements, and all pre-existing MgB4 was transformed into MgB2. A small amount of residual Mg remained in the bulks after the sintering process. Connectivity was improved with Mg additions, increasing 4 fold in the 10 wt.% Mg-MgB2 sample compared to unmodified MgB2. Jc values at low field were also significantly improved by Mg additions, in particular the 6 and 10 wt.% Mg-MgB2 specimens showed Jc(20 K, 0 T) values 4 − 5 times higher than for unmodified MgB2.

No abstract

Much interest has been shown recently in teacher expectation or “self‐fulfilling prophecy” effects, despite the difficulty of making objective observations of the phenomenon. The present case study concerns a population of twelve mixed‐ability chemistry classes in a comprehensive school in the U.K. The poor behavior of one of the groups led to a stigma being attached to it by staff, and for various doubtful reasons, this became associated with another class as well. A statistical analysis of examination marks shows that neither reputation was justified in terms of academic achievement, and quantifies possible teacher expectation effects arising from the situation. The findings demonstrate the ease with which academic achievements can be hampered unwittingly by the prejudices of a teacher even in a well‐structured learning situation.

Thermal tolerance is variable in corals, yet intrinsic and extrinsic drivers of tolerance are not well understood. Understanding the distribution and abundance of heat tolerant corals across seascapes is imperative for predicting responses to climate change and to support novel management actions. Rapid and high-throughput methods to measure heat-induced coral bleaching sensitivity are increasingly required to understand current and predict future responses to climate change. Experimental evaluations of coral heat and bleaching tolerance typically involve ramp-and-hold experiments run across days to weeks within aquarium facilities with limits to colony replication. Field-based acute heat stress assays have emerged as an alternative experimental approach to rapidly quantify heat tolerance in a large number of samples yet the role of key methodological considerations on the stress response measured remains unresolved. Here, we quantify the effects of coral fragment size, sampling time point, and physiological measures on the acute heat stress response in adult corals. The effect of fragment size differed between species (Acropora tenuis and Pocillopora damicornis). Most physiological parameters measured here declined over time (tissue colour, chlorophyll-a and protein content) from the onset of heating, with the exception of maximum photosynthetic efficiency (Fv/Fm), which was stable up to 24h post heating. Based on our experiments, we identified photosynthetic efficiency, tissue colour change, and host-specific assays such as catalase activity as key physiological measures for rapid quantification of thermal tolerance. We recommend that future applications of acute heat stress assays include larger fragments (>9cm2) where possible and sample between 10 - 14h after the end of heat stress. A validated high-throughput experimental approach combined with cost-effective genomic and physiological measurements underpins the development of markers and maps of heat tolerance across seascapes and ocean warming scenarios.