Ground effect is a phenomenon caused by the presence of a fixed boundary layer below the wing when it moves close to a fixed surface. This results in an effective increase in lift to drag ratio of the airfoil. In this paper, the performance of three airfoils used in general aviation is analysed in ground effect using ANSYS FLUENT at different operating conditions namely, the angle of attack and the height above the fixed surface. The main objectives are to are evaluate the performance of these airfoils in ground effect at different ground clearances and angles of attack and find the most suitable airfoil which can be used to exploit the advantages of ground effect. It was found that all the airfoils experienced an increase in lift and decrease in drag as distance from the ground reduced thus validating ground effect. The aerodynamic efficiency increases, reaches a maximum, and then decreased as the angle of attack increased due to the onset of flow separation at the top surface of the airfoil. It was also noted that the symmetric airfoil experienced negative lift at very low ground clearances which was attributed to the formation of a venturi effect between the airfoil and ground
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.