Two grades of 5 mm thick polypropylene (PP) sheets, one having linear polymer chains (PP-TF-1) and the other having long-chain branches (PP-TF-2), were drape formed, using moulds of different parameters. Single-sided heating of sheet was found to be suitable only at lower depths of draw. Double-sided heating gave good part shape conformance at all depths of draw. PP-TF-2 was found to have lower crystallinity than PP-TF-1, suggesting that it would have a lower sagging tendency and would give parts with more uniform wall thickness distribution. This was confirmed in formability studies. At higher depths of draw, an increase in draft angle was found to give more uniform wall thickness distribution, maintaining reasonable values of wall thickness. At lower depths of draw, draft angle was found to have no influence on product quality. Irrespective of material characteristics and other mould parameters, only moulds with generous values of corner radii gave strong corners.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.