Magnesiumeinkristalle wurden im dynamischen Zugversuch im Temperaturbereich von 77° K bis 453 °K verformt. Ähnlich wie bei Zink und Kadmium wird auch bei Magnesium eine Drei‐Bereiche‐Verfestigungskurve beobachtet. Die kritische Schubspannung nimmt bei tiefen Temperaturen mit wachsender Temperatur linear ab. Oberhalb von etwa 300 °K scheint sich ein weniger temperaturabhängiger Ast des τ0—T‐Diagramms abzuzeichnen. Der Temperaturverlauf der Verfestigungskoeffizienten in den Bereichen A und B der Verfestigungskurve ist qualitativ gleich. Die Tieftemperaturwerte sind unterhalb von 200 °K temperaturunabhängig und fallen oberhalb davon mit wachsender Temperatur ab. Die erstmals im Tieftemperaturbereich gemessenen θB‐Werte von Magnesiumeinkristallen ergeben G/θB = 400. Die Länge des Bereiches A ist bei tieferen Temperaturen temperaturunabhängig und wächst oberhalb von 370 °K mit steigender Temperatur. Die Länge des Bereiches B verhält sich ähnlich. Die Temperaturabhängigkeiten der reduzierten kritischen Schubspannungen τA/G, τB/G und τC/G lassen sich in der Form ln {τ(T)/G(T)} = A1,2 — B1,2T wiedergeben, die jeweils aus zwei Ästen [1, 2] besteht. Aus dem Tieftemperaturast der τC/G‐T/F(T))‐Abhängigkeit wurde die Stapelfehlerenergie von Mg für T = 230 °K zu 40 erg/cm2 abgeschätzt.
Die Temperaturabhängigkeiten der Hauptkenngrößen der Verfestigungskurven von Mg‐, Cd‐ und Zn‐Einkristallen in bezug auf die absolute Schmelztemperatur TS dieser Metalle werden einander gegenübergestellt.
Es wird über das Verfestigungsverhalten kadmiumlegierter Zinkeinkristalle berichtet, die im dynamischen Zugversuch bei Temperaturen von 90 bis 573 °K verformt wurden. Gegenüber älteren Messungen an verunreinigten Zinkeinkristallen ergeben sich wesentliche Abweichungen im Einfluß des Fremdstoffgehaltes auf einige Kenngrößen der Verfestigungskurve. Es wird ferner gefunden, daß die Temperaturabhängigkeit der kritischen Schubspannung sowohl bei hohen als auch tiefen Temperaturen nicht mit den theoretischen Erwartungen für hexagonale Metalle übereinstimmt. Abschließend werden einige Ergebnisse über den Einfluß des Kadmiums auf die sprunghafte Verformung von Zinkeinkristallen mitgeteilt.
Es wird über den Einfluß der Temperatur und des Kadmiumgehaltes auf die Verfestigungskenngrößen von Zinkeinkristallen berichtet, die im dynamischen Zugversuch zwischen 90 und 573°K verformt wurden. Die reduzierten Verfestigungskoeffizienten ϑA/G3 und ϑB/G3 werden durch Kadmiumzusätze nicht verändert, die Einsatzspannung ϑC des Bereiches C dagegen erhöht und die Länge des Bereiches A vergrößert. Bei reinen und schwach legierten Kristallen ergibt sich unterhalb 200 °K ein Abfall der ϑA/G3‐Werte, für den statische Erholungsprozesse als Ursache ausgeschlossen werden können.
Das nähere Studium des Aufbaues von Korngrenzen erstreckt sich heute auch auf den Mechanismus der interkristallinen Korrosion, über die vom Autor kürzlich in dieser Zeitschrift berichtet wurde, sowie der „Spannungskorrosion und Korngrenzenart (Fein‐, Klein‐ Groß‐ winkelkorngrenzen)”︁, über die im Beitrag für die Legierung AlMg berichtet wird.
Eine korrosionschemisch durch die thermische Vorbehandlung empfindlich gemachte AlMg‐Legierung wird auf ihr Spannungskorrosionsverhalten dahingehend untersucht, welche der Korngrenzenarten korrosionsempfindlich ist. Sowohl bei durchgehender als auch bei intermittierter Belastung zeigte sich unter bestimmten Versuchsbedingungen ein Zwischenninveau, dessen zugehörige Ruhe‐Bezugesspannung durch intermittierte Belastung bestimmt und durch Vergleich mit bekannten Bildungsaffinitäten der Bildung eines basischen Bleisulfats nach der Elektrodenreaktion
zugeordnet wurde.
I n this paper first neutronographic texture investigations for two-phased steels are presented. From each of the phases three complete pole figures were measured. The analysis were carried out by means of the series expansion method. The three-dimensional orientation distribution functions of a11 specimens are of tubular shape. For the interpretation of the differences to single-phased steels the relationships for transformation by KURD-JUMOV-SACHS and by NISHIYAMA were utilized.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.