The physics base for the ITER Physics Design Guidelines is reviewed in view of application to DEMO and areas are pointed out in which improvement is needed to arrive at a consistent set of DEMO Physics Design Guidelines. Amongst the proposed improvements, the area of power exhaust plays a crucial role since predictive capability of present-day models is low and this area is expected to play a major role in limiting DEMO designs due to the much larger value of Ptot/R in DEMO than in present-day devices and even ITER.

Demonstrating improved confinement of energetic ions is one of the key goals of the Wendelstein 7-X (W7-X) stellarator. In the past campaigns, measuring confined fast ions has proven to be challenging. Future deuterium campaigns would open up the option of using fusion-produced neutrons to indirectly observe confined fast ions. There are two neutron populations: 2.45 MeV neutrons from thermonuclear and beam-target fusion, and 14.1 MeV neutrons from DT reactions between tritium fusion products and bulk deuterium. The 14.1 MeV neutron signal can be measured using a scintillating fiber neutron detector, whereas the overall neutron rate is monitored by common radiation safety detectors, for instance fission chambers. The fusion rates are dependent on the slowing-down distribution of the deuterium and tritium ions, which in turn depend on the magnetic configuration via fast ion orbits. In this work, we investigate the effect of magnetic configuration on neutron production rates in W7-X. The neutral beam injection, beam and triton slowing-down distributions, and the fusion reactivity are simulated with the ASCOT suite of codes. The results indicate that the magnetic configuration has only a small effect on the production of 2.45 MeV neutrons from DD fusion and, particularly, on the 14.1 MeV neutron production rates. Despite triton losses of up to 50 %, the amount of 14.1 MeV neutrons produced might be sufficient for a time-resolved detection using a scintillating fiber detector, although only in high-performance discharges.

Noninductive current drive has been performed in the tokamak ASDEX upgrade by injection of radiofrequency waves at the second harmonic of the electron-cyclotron frequency in order to suppress unwanted disturbances of the magnetic-field configuration. The current has been driven parallel [co-electron cyclotron current drive (ECCD)] and antiparallel (counter-ECCD) to the plasma current to compare the effect of heating with direct current drive in the magnetic island. For the first time it has been shown experimentally that total stabilization of neoclassical tearing modes is possible with co-ECCD. The experiments verify the role of direct current drive as opposed to local heating.