No abstract

Combination of complementary imaging techniques, like hybrid PET/MRI, allows protocols to be developed that exploit the best features of both. In order to get the best of these combinations the use of dual probes is highly desirable. On this sense the combination of biocompatible iron oxide nanoparticles and 68Ga isotope is a powerful development for the new generation of hybrid systems and multimodality approaches. Our objective was the synthesis and application of a chelator-free 68Ga-iron oxide nanotracer with improved stability, radiolabeling yield and in vivo performance in dual PET/MRI. We carried out the core doping of iron oxide nanoparticles, without the use of any chelator, by a microwave-driven protocol. The synthesis allowed the production of extremely small (2.5 nm) 68Ga core-doped iron oxide nanoparticles. The microwave approach allowed an extremely fast synthesis with a 90% radiolabeling yield and T1 contrast in MRI. With the same microwave approach the nano-radiotracer was functionalized in a fast and efficient way. We finally evaluated these dual targeting nanoparticles in an angiogenesis murine model by PET/MR imaging. Copyright © 2016 John Wiley & Sons, Ltd.

No abstract

Self-heating of conductive nanofilled resins due to the Joule effect is interesting for numerous applications, including computing, self-reparation, self-post-curing treatment of resins, fabrication of adhesive joints, de-icing coatings and so on. In this work, we study the effect ofthe nature and amount of graphitic nanofiller on the self-heating of epoxy composites.The addition of graphitic nanofillers induced an increase in the thermal conductivity ofthe epoxy resins, directly proportional to the nanofiller content. Percolation was not observed because ofthe heat transport through phonons. In contrast, the electrical conductivity curves present a clear percolation threshold, due to the necessity of an electrical percolation network. The electrical threshold is much lower for composites reinforced with carbon nanotubes (CNTs, 0.1 wt.%) than for the resin filled with graphene nanoplatelets (GNPs, 5 %). This fact is due to their very different specific areas.The composites filled with CNTs reach higher temperatures than the ones reinforced with GNPs, applying low electrical voltage because of their higher electrical conductivity. In contrast, the self-heating is more homogeneous for the GNP/epoxy resins due to their higher thermal conductivity. It was also confirmed that the self-heating is repetitive in several cycles, reaching the same temperature when the same voltage is applied.M S. G. Prolongo

No abstract