A class of printed antipodal drop-shaped dipole antennas for wideband wireless communication systems is presented. A suitable shaping of the feeding lines and radiating arms is adopted to achieve an operating bandwidth larger than 10 GHz useful to meet the requirements of several wireless communication standards. A thin, low permittivity dielectric substrate is used to reduce the excitation of surface waves which are responsible for a degradation of the radiative characteristics. The proposed antenna structures present a reduced occupation volume which allows an easy integration in mobile terminals, as well as in radio base stations. A locally conformal FDTD numerical procedure has been adopted to analyze the radiating structures. An equivalent circuit, useful to predict the frequency-domain behavior of the scattering parameters of a two-element array formed by the proposed structures, is also presented. The numerical results concerning the antenna parameters are found to be in good agreement with the experimental measurements

No abstract

A compact wideband planar-printed antenna for wireless communications is presented. A suitable shape of the antenna arms and a proper tapering of the feeding line are employed to achieve an impedance bandwidth of more than 10 GHz useful to meet the requirements of several wireless communication standards. An enhanced locally conformal finite-difference time-domain (FDTD) numerical procedure, based on a suitable normalization of the electromagnetic field-related quantities together with a near-to-far-field transformation, is developed to perform the full-wave analysis of the radiating structure. The proposed numerical procedure allows the accurate evaluation of the electromagnetic field distribution from the FDTD domain up to the far-field region, achieving a reduced computational burden compared with conventional FDTD formulations. Using the proposed technique, the electromagnetic and circuital behaviour of the antenna is then derived and analyzed in detail. Numerical results concerning the antenna parameters are in good agreement with experimental measurements. Copyright (C) 2010 John Wiley & Sons, Ltd

An improved low-profile printed antipodal drop-shaped dipole antenna for wide-band wireless applications is presented. The proposed radiating structure is integrated with a planar metal reflector useful to enhance antenna gain up to 5.5 dBi and the frontto-back ratio up to 21 dB. The geometry of reflector, feeding line, and dipole arms is optimized in order to achieve a broad operating bandwidth useful to meet the requirements of modern wireless communication protocols. Furthermore, the particular shape of the metal reflector and the adoption of a thin low-permittivity dielectric substrate result in a low distortion of the radiated field and a limited back radiation which makes the antenna suitable for UWB applications as well. These features, together with the low profile and the limited occupation area, make the antenna well adapted to mobile terminals as well as radio base stations. A locally conformal FDTD numerical procedure has been adopted to design and analyse the radiating structure, while a SEM technique has been employed to highlight the field perturbation caused by the antenna reflector as well as to extract the characteristics underlying the transient behaviour of the antenna. The experimental measurements performed on an antenna prototype are found to be in good agreement with the numerical computations.

No abstract

No abstract