The flexural strength, flexural modulus, and the amount of fluoride released from four experimental denture base resins containing 5, 10, 20 and 30 wt% surface pre-reacted glass-ionomer (S-PRG) filler added to the powder were evaluated. The mean flexural strength of the experimental resins, except the 30 wt%, and the flexural modulus of all the resins, complied with ISO 1567 requirements. In the 20 wt% resin, the amount of fluoride released in the initial phase was 1.88 μg/cm 2 /day, after which the level decreased. After recharging in a 9,000 ppm fluoride solution for eight hours, the level of released fluoride increased markedly to 40.21 μg/cm 2 /16hrs. Our results show that fluoride levels increased as a function of the S-PRG filler content. After the almost completely discharged resins were recharged, similar fluoride release occurred again. These results suggest that denture base resins containing S-PRG filler have great recharge and release capabilities which may assist in preventing root caries of abutment teeth.

The demineralization of dentin was studied when placed adjacent to one of four experimental denture base-resins. These experimental resins contained polymethylmethacrylate (PMMA) and 0, 5, 10, 20 or 30 wt% surface reaction-type prereacted glass-ionomer (S-PRG) filler, respectively. A dentin thin-section was sandwiched between these resins and subjected to demineralization for 1 wk. Microradiographic analyses showed that the mineral vol% of the surface was increased, and lesion formation was inhibited, in a dose-response relationship with the amount of S-PRG filler. Moreover, the mineral loss decreased, by up to 60%, with an increasing amount of filler. These results indicate that denture base-resins containing S-PRG filler possess a substantial inhibition capability against demineralization, and this may thereby assist in preventing root caries of abutment teeth.

Pain and itch are closely related sensations, yet qualitatively quite distinct. Despite recent advances in brain imaging techniques, identifying the differences between pain and itch signals in the brain cortex is difficult due to continuous temporal and spatial changes in the signals. The high spatial resolution of positron emission tomography (PET) and functional magnetic resonance imaging (fMRI) has substantially advanced research of pain and itch, but these are uncomfortable because of expensiveness, importability and the limited operation in the shielded room. Here, we used near infrared spectroscopy (NIRS), which has more conventional usability. NIRS can be used to visualize dynamic changes in oxygenated hemoglobin and deoxyhemoglobin concentrations in the capillary networks near activated neural circuits in real-time as well as fMRI. We observed distinct activation patterns in the frontal cortex for acute pain and histamine-induced itch. The prefrontal cortex exhibited a pain-related and itch-related activation pattern of blood flow in each subject. Although it looked as though that activation pattern for pain and itching was different in each subject, further cross correlation analysis of NIRS signals between each channels showed an overall agreement with regard to prefrontal area involvement. As a result, pain-related and itch-related blood flow responses (delayed responses in prefrontal area) were found to be clearly different between pain (τ = +18.7 sec) and itch (τ = +0.63 sec) stimulation. This is the first pilot study to demonstrate the temporal and spatial separation of a pain-induced blood flow and an itch-induced blood flow in human cortex during information processing.

This study evaluated the capability of a novel fluoride-releasing, all-in-one adhesive system on forming inhibition layer (radio-opaque layer) as compared with other adhesive systems.Dentin surface was treated with Imperva bond (IB) , FL-BOND (FB) , Reactmer bond (RE) , or FL-BOND S-1 (FS) (which is a novel system) . Untreated specimens were categorized as nonbonding group (NB) . After storing for 10 days in de-ionized water, the specimens were cut into halves perpendicularly to the pulp chamber and immersed in a buffered demineralizing solution for four days. Longitudinal sections were cut and microradiographed.The width of inhibition layers adjacent to the adhesive surfaceat a depth of 50um under the demineralization surfacewas analyzed. Microradiography revealed distinct inhibition layers adjacent to the experimental surfaces of FB, RE, and FS. No inhibition layers were observed in NB and IB. In particular, the width of the inhibition layer of FS (12.5um) was significantly greater than those of FB and RE. These results indicated that a newly developed all-inone adhesive system, FS, may have a superior ability of forming inhibition layers adjacent to cavity walls, and that it may also protect dentin against further demineralization in case of secondary marginal caries.

This study investigated the in vitro anti-demineralization effects of resin-based temporary filling materials containing surface prereacted glass-ionomer (S-PRG) filler on dentin. Bovine root dentin specimens with a 3×3 mm experimental surface were divided into four treatment groups: DuraSeal (DU) as a control, S-PRG filler-free temporary material (S0), material containing 10% (S10) and 20% (S20) S-PRG filler. Each material was applied to 3×2 mm of the experimental surface, and the specimens were immersed in 8% methylcellulose gel demineralization system for one week at 37˚C. Mineral profiles and integrated mineral loss (IML) of lesions induced on the surface (3×1 mm) adjacent to the materials were computed by transversal microradiography. S10 and S20 yielded thick surface layers and shallow lesion bodies, with significantly lower IML than DU and S0 (p<0.05, Tukey's test). These findings indicate that temporary filling resin-based materials containing over 10% of S-PRG filler content have anti-demineralization effects on adjacent dentin.