In this study, we proposed a novel approach to improve centrifugal pump performance with regard to the pump head, pump efficiency, and power. Firstly, to establish constraints, an optimal numerical model that accounted for factors such as pump efficiency and the head was considered. The pump was designed, and an artificial intelligence algorithmic approach was applied to the pump before performing experiments. We considered a set of models by selecting the parameters of the centrifugal pump casing section area, the interference of the impeller, the volute tongue length, and the volute tongue angle. The weights of the factors of safety and displacement on the optimization indices were estimated. The matrix of the weights for the optimal process was less than 38% or greater than 62%. This approach guarantees a complicated multi-objective optimization problem. The results show that the centrifugal pump performances were improved.
Compliant mechanisms’ design aims to create a larger workspace and simple structural shapes because these mechanical systems usually have small dimensions, reduced friction, and less bending. From that request, we designed optimal bridge-type compliant mechanism flexure hinges with a high magnification ratio, low stress by using a flexure joint, and especially no friction and no bending. This joint was designed with optimal dimensions for the studied mechanism by using the method of grey relational analysis (GRA), which is based on the Taguchi method (TM), and finite element analysis (FEA). Grey relational grade (GRG) has been estimated by an artificial neural network (ANN). The optimal values were in good agreement with the predicted value of the Taguchi method and regression analysis. The finite element analysis, signal-to-noise analysis, surface plot, and analysis of variance demonstrated that the design dimensions significantly affected the equivalent stress and displacement. The optimal values of displacement were also verified by the experiment. The outcomes were in good agreement with a deviation lower than 6%. Specifically, the displacement amplification ratio was obtained as 65.36 times compared with initial design.
Innovative carbon reduction and sustainability solutions are needed to combat climate change. One promising approach towards cleaner air involves the utilization of lithium-ion batteries (LIB) and electric power vehicles, showcasing their potential as innovative tools for cleaner air. However, we must focus on the entire battery life cycle, starting with production. By prioritizing the efficiency and sustainability of lithium-ion battery manufacturing, we can take an essential step toward mitigating climate change and creating a healthier planet for future generations. A comprehensive case study of the leading LIB manufacturers demonstrates the usefulness of the suggested hybrid methodology. Initially, we utilized the Malmquist model to evaluate these firms’ total efficiency while dissecting their development into technical and technological efficiency change components. We employed the Epsilon-Based Measure (EBM) model to determine each organization’s efficiency and inefficiency scores. The findings show that the EBM approach successfully bridged the gap in the LIB industry landscape. Combined with the Malmquist model, the resulting framework offers a powerful and equitable evaluation paradigm that is easily applicable to any domain. Furthermore, it accurately identifies the top-performing organizations in specific aspects across the research period of 2018–2021. The EBM model demonstrates that most organizations have attained their top level, except for A10, which has superior technology adoption but poor management. A1, A2, A4, A6, A8, A9, and A10 were unable to meet their targets because of the COVID-19 pandemic, despite productivity improvements. A12 leads the three highest-scoring enterprises in efficiency and total productivity changes, while A3 and A5 should focus on innovative production techniques and improved management. The managerial implications provide vital direction for green energy practitioners, enhancing their operational effectiveness. Concurrently, consumers can identify the best LIB manufacturers, allowing them to invest in long-term green energy solutions confidently.
Numerous scholars have thoroughly studied the topic of choosing machines considering the progress and technological growth seen in machinery options. This scholarly investigation explores decision-making methods specifically designed to aid the selection of machines in manufacturing businesses. Additionally, this research emphasizes the need for decision-making frameworks in manufacturing facilities, highlighting the importance of smart machine selection strategies in those contexts. In this research, we show a dual-MCDM approach that includes DEX—decision experts—and the EDAS method that are popularly employed to solve decision-making problems in both academic and practical industries. Throughout the previous decade, business leaders and managers increasingly use MCDM solutions to overcome machine selection challenges. At this time, while various decision-support technologies and procedures have been developed and used, it is essential that we discuss the sequence of our study objectives and drive the proposed method for widening use in practical firms. In short, this research may be helpful as a literature review for MDCM studies and related topics. It will also help executives, engineers, and specialists determine which equipment or machines to create and increase product quality in manufacturing and industry.
The design of cooperative applications combining several unmanned aerial and aquatic vehicles is now possible thanks to the considerable advancements in wireless communication technology and the low production costs for small, unmanned vehicles. For example, the information delivered over the air instead of inside an optical fiber causes it to be far simpler for an eavesdropper to intercept and improperly change the information. This article thoroughly analyzes the cybersecurity industry’s efficiency in addressing the rapidly expanding requirement to incorporate compelling security features into wireless communication systems. In this research, we used a combination of DEA window analysis with the Malmquist index approach to assess the efficiency of the cybersecurity industry. We used input and output factors utilizing financial data from 2017–2020 sources from a US market. It was found that U1—Synopsys and U9—Fortinet exhibited the best performances when relating Malmquist and DEA window analysis. By evaluating ten big companies in the cybersecurity industry, we indicate that U2—Palo Alto Networks and U6—BlackBerry Ltd. companies needed significant improvements and that four other companies were generally more efficient. The findings of this study provide decision-makers a clear image and it will be the first study to evaluate and predict the performance of cyber security organizations, providing a valuable reference for future research.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.