This paper introduces a novel method that allows fast and reliable extraction of material parameters in terahertz time-domain spectroscopy. This method could be applied for most of materials and requires neither simplifying assumptions nor samples of different thickness for the extraction. The presented extraction procedure operates either on truncated terahertz signals when temporal windowing is possible, or on full ones otherwise. Some experimental examples covering all practical cases are given. In particular, the extraction procedure treats the tedious case of samples for which internal reflections of the terahertz pulse slightly overlap.

Time-domain spectroscopy allows fast and broadband measurement of the optical constants of materials in the terahertz domain. We present a method that improves the determination of the optical constants through simultaneous determination of the sample thickness. This method could be applied to any material with moderate absorption and requires only two measurements of the temporal profile of the terahertz pulses: a reference one without the sample and one transmitted through the sample.

No abstract

International audienceIn this paper, we demonstrate for the first time that a 19-bit chipless tag based on a paper substrate can be realized using the flexography technique, which is an industrial high-speed printing process. The chipless tag is able to operate within the ultra-wide band (UWB) and has a reasonable size ( 7×3 cm ²) compared to state-of-the-art versions. Thus, it is possible to use this design for various identification applications that require a low unit cost of tags. Both the simulation and measurement results are shown, and performance comparisons are provided between several realization processes, such as classical chemical etching, flexography printing, and catalyst inkjet printing

We analyze the contributions of various error sources to uncertainty in the far-infrared optical constants (refractive index and absorption coefficient) measured by terahertz (THz) time-domain spectroscopy. We focus our study on the influence of noise. This noise study is made with a thick slab of transparent material for which the THz transmitted signal exhibits temporal echoes owing to reflections in the sample. Extracting data from each of these time-windowed echoes allows us to characterize the noise sources. In THz timedomain spectroscopy experiments in which photoswitches are used as antennae, the transmitting antenna constitutes the principal noise source. The uncertainty in the far-infrared optical constants can be strongly reduced when the extraction is performed with THz echoes that have encountered many reflections in the sample.