Artificial organs within the blood stream are generally associated with flow-induced blood damage, particularly hemolysis of red blood cells. These damaging effects are known to be dependent on shear forces and exposure times. The determination of a correlation between these flow-dependent properties and actual hemolysis is the subject of this study. For this purpose, a Couette device has been developed. A fluid seal based on fluorocarbon is used to separate blood from secondary external damage effects. The shear rate within the gap is controlled by the rotational speed of the inner cylinder, and the exposure time by the amount of blood that is axially pumped through the device per given time. Blood damage is quantified by the index of hemolysis (IH), which is calculated from photometric plasma hemoglobin measurements. Experiments are conducted at exposure times from texp=25 - 1250 ms and shear rates ranging from tau=30 up to 450 Pa ensuring Taylor-vortex free flow characteristics. Blood damage is remarkably low over a broad range of shear rates and exposure times. However, a significant increase in blood damage can be observed for shear stresses of tau>or= 425 Pa and exposure times of texp>or= 620 ms. Maximum hemolysis within the investigated range is IH=3.5%. The results indicate generally lower blood damage than reported in earlier studies with comparable devices, and the measurements clearly indicate a rather abrupt (i.e., critical levels of shear stresses and exposure times) than gradual increase in hemolysis, at least for the investigated range of shear rates and exposure times.

The goal of this study was the development of a bioartificial nerve guide to induce axonal regeneration in the peripheral nervous system (PNS). In this in vitro study, the ability of a novel, 3-dimensional (3D), highly oriented, cross-linked porcine collagen scaffold to promote directed axonal growth has been studied. Collagen nerve guides with longitudinal guidance channels were manufactured using a series of chemical and mechanical treatments with a patented unidirectional freezing process, followed by freeze-drying (pore sizes 20-50 microm). Hemisected rat dorsal root ganglia (DRG) were positioned such that neural and non-neural elements could migrate into the collagen scaffold. After 21 days, S100-positive Schwann cells (SCs) migrated into the scaffold and aligned within the guidance channels in a columnar fashion, resembling "Bands of Büngner." Neurofilament-positive axons (mean length +/- SD 756 microm +/- 318 microm, maximum 1496 microm) from DRG neurons entered the scaffold where the growth within the guidance channels was closely associated with the oriented SCs. This study confirmed the importance of SCs in the regeneration process (neurotrophic theory). The alignment of SCs within the guidance channels supported directional axonal growth (contact guidance theory). The microstructural properties of the scaffold (open, porous, longitudinal pore channels) and the in vitro data after DRG loading (axonal regeneration along migrated and columnar-aligned SCs resembling "Band of Büngner") suggest that this novel oriented 3D collagen scaffold serves as a basis for future experimental regeneration studies in the PNS.

No abstract

No abstract

Tissue engineering of skeletal muscle from cultured cells has been attempted using a variety of synthetic and natural macromolecular scaffolds. Our study describes the application of artificial scaffolds (collagen sponges, CS) consisting of collagen‐I with parallel pores (width 20–50 μm) using the permanent myogenic cell line C2C12. CS were infiltrated with a high‐density cell suspension, incubated in medium for proliferation of myoblasts prior to further culture in fusion medium to induce differentiation and formation of multinucleated myotubes. This resulted in a parallel arrangement of myotubes within the pore structures. CS with either proliferating cells or with myotubes were grafted into the beds of excised anterior tibial muscles of immunodeficient host mice. The recipient mice were transgenic for enhanced green fluorescent protein (eGFP) to determine a host contribution to the regenerated muscle tissue. Histological analysis 14–50 days after surgery showed that donor muscle fibres had formed in situ with host contributions in the outer portions of the regenerates. The function of the regenerates was assessed by direct electrical stimulation which resulted in the generation of mechanical force. Our study demonstrated that biodegradable CS with parallel pores support the formation of oriented muscle fibres and are compatible with force generation in regenerated muscle.

Traumatic injury to the nervous system induces functional deficits as a result of axonal destruction and the formation of scar tissue, cystic cavitation, and physical gaps. Bioengineering bridging materials should ideally act as cell carriers for the implantation of axon growth-promoting glia, as well as supporting integration with host cell types. Here, we describe the cytocompatibility of a novel, micro-structured porcine collagen scaffold containing densely packed and highly orientated channels that, in three-dimensional (3D) tissue culture, supports attachment, proliferation, aligned process extension, and directed migration by populations of glial cells (olfactory nerve ensheathing cells and astrocytes) and orientated axonal growth by neurons (differentiated human SH-SY5Y neuroblastoma cell line). The seeded glia required several weeks to penetrate deeply into the highly porous scaffold, where they adopted an orientated morphology similar to that displayed in simple 2D cultures. The direct interaction between SH-SY5Y-derived nerve fibers and the collagen scaffold also resulted in highly orientated axonal growth. It is likely that biocompatible scaffolds that are capable of promoting glial cell attachment, migration, and highly orientated process outgrowth will be important for future repair strategies for traumatically injured nervous tissues.

No abstract

No abstract