The long held objective of directly observing atomic motions during the defining moments of chemistry has been achieved based on ultrabright electron sources that have given rise to a new field of atomically resolved structural dynamics. This class of experiments requires not only simultaneous sub-atomic spatial resolution with temporal resolution on the 100 femtosecond time scale but also has brightness requirements approaching single shot atomic resolution conditions. The brightness condition is in recognition that chemistry leads generally to irreversible changes in structure during the experimental conditions and that the nanoscale thin samples needed for electron structural probes pose upper limits to the available sample or "film" for atomic movies. Even in the case of reversible systems, the degree of excitation and thermal effects require the brightest sources possible for a given space-time resolution to observe the structural changes above background. Further progress in the field, particularly to the study of biological systems and solution reaction chemistry, requires increased brightness and spatial coherence, as well as an ability to tune the electron scattering cross-section to meet sample constraints. The electron bunch density or intensity depends directly on the magnitude of the extraction field for photoemitted electron sources and electron energy distribution in the transverse and longitudinal planes of electron propagation. This work examines the fundamental limits to optimizing these parameters based on relativistic electron sources using re-bunching cavity concepts that are now capable of achieving 10 femtosecond time scale resolution to capture the fastest nuclear motions. This analysis is given for both diffraction and real space imaging of structural dynamics in which there are several orders of magnitude higher space-time resolution with diffraction methods. The first experimental results from the Relativistic Electron Gun for Atomic Exploration (REGAE) are given that show the significantly reduced multiple electron scattering problem in this regime, which opens up micron scale systems, notably solution phase chemistry, to atomically resolved structural dynamics.
In this work we present the outlines of possible experiments for dielectric laser acceleration (DLA) of ultra-short relativistic electron bunches produced by the ARES linac, currently under construction at the SINBAD facility (DESY Hamburg). The experiments are to be performed as part of the Accelerator on a Chip International Program (ACHIP), funded by the Gordon and Betty Moore Foundation. At SINBAD we plan to test the acceleration of already preaccelerated relativistic electron bunches in laser-illuminated dielectric grating structures. We present outlines of both the acceleration of ultra-short single bunches, as well as the option to accelerate phase-synchronous sub-fs microbunch trains. Here the electron bunch is conditioned prior to the injection by interaction with an external laser field in an undulator. This generates a sinusoidal energy modulation that is transformed into periodic microbunches in a subsequent chicane. The phase synchronization is achieved by driving both the modulation process and the DLA with the same laser pulse. In addition to the conceptual layouts and plans of the experiments we present start-to-end simulation results for different ARES working points.
We present a status update on the dedicated R&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100 MeV S-band linac at its core. We present the objectives of this experiment ranging from the study of compression techniques to sub-fs level to its application as injector for various advanced acceleration schemes e.g. the plans to use ARES as a test-site for DLA experiments in the context of the ACHIP collaboration. The time-line including the planned extension with laser driven plasma-wakefield acceleration is presented. The second initial experiment is AXSIS which aims to accelerate fs-electron bunches to 15 MeV in a THz driven dielectric structure and subsequently create X-rays by inverse Compton scattering.
The accelerator R&D facility SINBAD (Short Innovative Bunches and Accelerators at DESY) will drive multiple independent experiments in the fields of production of ultra-short electron bunches and tests of advanced high gradient acceleration concepts. The SINBAD-ARES (Accelerator Research Experiment at SINBAD) linac has been designed to allow the production of high brightness ultra-short electron bunches with excellent arrival-time stability. The accelerator will be used to study experimentally the optimization of the brightness for fs long electron bunches. Such electron bunches, with tunable characteristics, will be then injected into novel accelerators realized in the context of the ATHENA project, the ACHIP international collaboration and the ARIES program. In this paper we describe the principal characteristics of the linac design, we underline the technical challenges connected to the production and characterization of fs bunches and we report on the status of the installation and commissioning.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.