Fatigue failure of solder joints is one of the major causes of failure in electronic devices. Fatigue life prediction models of solder joints were first put forward in the early 1960s, and since then, numbers of methods were used to model the fatigue mechanism of solder joints. In this article, the majority fatigue life models are summarized, with emphasis on the latest developments in the fatigue life prediction methods. All the models reviewed are grouped into four categories based on the factors affecting the fatigue life of solder joints, which are: plastic strain-based fatigue models, creep damage-based fatigue models, energy-based fatigue models, and damage accumulation-based fatigue models. The models that do not fit any of the above categories are grouped into “other models.” Applications and potential limitations for those models are also discussed.
Solder joints in electronic assemblies are subjected to mechanical and thermal cycling. These cyclic loadings lead to the fatigue failure of solder joints involving damage accumulation, crack initiation, crack propagation, and failure. Aging leads to significant changes on the microstructure and mechanical behavior of solder joints. While the effect of thermal aging on solder behavior has been examined, no prior studies have focused on the effect of long-term room temperature aging (25 °C) on the solder failure and fatigue behavior. In this paper, the effects of long-term room temperature aging on the fatigue behavior of five common lead-free solder alloys, i.e., SAC305, SAC105, SAC-Ni, SAC-X-Plus, and Innolot, have been investigated. Several individual lead-free solder joints on printed circuited boards with two aging conditions (no aging and 4 years of aging) have been prepared and subjected to shear cyclic stress–strain loadings until the complete failure. Fatigue life was recorded for each solder alloy. From the stress–strain hysteresis loop, inelastic work and plastic strain ranges were measured and empirically modeled with the fatigue life. The results indicated that 4 years of room temperature aging significantly decreases the fatigue life of the solder joints. Also, inelastic work per cycle and plastic strain range are increased after 4 years of room temperature aging. The fatigue life degradation for the solder alloys with doped elements (Ni, Bi, Sb) was relatively less compared to the traditional SAC105 and SAC305.
The surface finish (SF) becomes a part of the solder joint during assembly and improves the component’s reliability. Furthermore, the SF influences the solder joint’s reliability by affecting the thickness of the intermetallic compound (IMC) layer at the solder interface and copper pads. In this experiment, five different alloys are used and compared with the SAC305 alloy, two of which, Innolot and SAC-Bi, are bi-based solder alloys. This study includes three common SFs: electroless nickel immersion gold (ENIG), immersion silver (ImAg), and organic solderability preserve (OSP). The performance of three surface finishes is examined in terms of component characteristic life. All of the boards were isothermally aged for twelve months at 125 °C. The boards were then exposed to 5000 cycles of thermal cycling at temperatures ranging from −40–+125 °C. Most of the current research considers only one or two factors affecting the reliability of the electronic package. This study combines the effect of multiple factors, including solder paste content, SF, isothermal aging, and thermal cycling, to ensure that the test conditions represent real-world applications. In addition, the electronics packages are assembled using commercialized alloys. The current study focuses on a high-performance alloy already present in the electronic market. The failure data were analyzed statistically using the Weibull distribution and design of experiments (DOE) analysis of variance (ANOVA) techniques. The findings reveal that the micro and uniformly distributed precipitates in solder microstructures are critical for high-reliability solder joints. Re-crystallization of the thermally cycled solder joints promotes the local formation of numerous new grains in stress-concentrated zones. As the fracture spreads along these grain boundaries and eventually fails, these new grains participate in crack propagation. Aging significantly worsens this situation. Finally, although the ENIG surface finish with its Ni layer outperforms other SFs, this does not imply that ENIG is more reliable in all solder paste/sphere/finish combinations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.