No abstract

No abstract

Indoor positioning systems based on visible light communication (VLC) using white light-emitting diodes (WLEDs) have been widely studied in the literature. In this paper, we present an indoor visible-light positioning (VLP) system based on red–green–blue (RGB) LEDs and a frequency division multiplexing (FDM) scheme. This system combines the functions of an FDM scheme at the transmitters (RGB LEDs) and a received signal strength (RSS) technique to estimate the receiver position. The contribution of this work is two-fold. First, a new VLP system with RGB LEDs is proposed for a multi-cell network. Here, the RGB LEDs allow the exploitation of the chromatic space to transmit the VLP information. In addition, the VLC receiver leverages the responsivity of a single photodiode for estimating the FDM signals in RGB lighting channels. A second contribution is the derivation of an expression to calculate the optical power received by the photodiode for each incident RGB light. To this end, we consider a VLC channel model that includes both line-of-sight (LOS) and non-line-of-sight (NLOS) components. The fast Fourier transform (FFT) estimates the powers and frequencies of the received FDM signal. The receiver uses these optical signal powers in the RSS-based localization application to calculate the Euclidean distances and the frequencies for the RGB LED position. Subsequently, the receiver’s location is estimated using the Euclidean distances and RGB LED positions via a trilateration algorithm. Finally, Monte Carlo simulations are performed to evaluate the error performance of the proposed VLP system in a multi-cell scenario. The results show a high positioning accuracy performance for different color points. The average positioning error for all chromatic points was less than 2.2 cm. These results suggest that the analyzed VLP system could be used in application scenarios where white light balance or luminaire color planning are also the goals.

The effects of confinement and magnetic fields on the effective electron Landé g factor of GaAs–Ga1−xAlxAs cylindrical quantum well wires are studied. Calculations were carried out via the Ogg–McCombe effective Hamiltonian which is used to describe the non-parabolicity and anisotropy effects on the electron states in the conduction band. The applied magnetic field is taken along the wire axis, and the Schrödinger equation corresponding to electron spin projections parallel and antiparallel to the magnetic field is solved by using an expansion of the electron wavefunctions in terms of two-dimensional harmonic oscillator wavefunctions. Calculations for the electron factor in GaAs–Ga1−xAlxAs cylindrical quantum well wires are compared with results from previous theoretical work. Moreover, the present results clearly indicate the importance of taking into account the non-parabolicity/anisotropy of the conduction band if one is interested in a quantitative understanding of the electron g factor in GaAs–Ga1−xAlxAs quantum well wires.

Colour-shift keying (CSK) is a visible light communication (VLC) modulation scheme used in the existing IEEE 802.15.7 standard. In CSK, information is transmitted by changing the light intensities of the RGB LEDs. In this work, a low-complexity VLC system is proposed using CSK modulation and a novel receiver based on a light-to-frequency (LTF) converter. At the receiver, CSK symbols are interpreted and decoded in terms of frequencies, which are processed by a counter module of a generic microcontroller, thus avoiding the use of analog-to-digital converters (ADCs), which results in a low-cost VLC system. The main contributions of this work are summarized in the following key points: (1) A low-complexity receiver for CSK modulation is introduced; (2) A particle swarm optimization (PSO) algorithm for CSK constellation design is suggested considering the restrictions of the LTF based receiver; (3) Experimental and theoretical validation is perfomed for the proposed multi-colour VLC system. The results show that this system can provide a transmission speed of 100 kbps using a 4-CSK-LTF constellation for a symbol error rate (SER) of 10 − 4 and a signal to noise ratio (SNR) around 35 dB. These results suggest that the analysed system could find applications on those scenarios where low transmission speeds and ease of deployment are the goals.