Understanding the effects of environmental change on ecosystems requires the identification of baselines that may act as reference conditions. However, the continuous change of these references challenges our ability to define the true natural status of ecosystems. The so-called sliding baseline syndrome can be overcome through the analysis of quantitative time series, which are, however, extremely rare. Here we show how combining historical quantitative data with descriptive ‘naturalistic’ information arranged in a chronological chain allows highlighting long-term trends and can be used to inform present conservation schemes. We analysed the long-term change of a coralligenous reef, a marine habitat endemic to the Mediterranean Sea. The coralligenous assemblages of Mesco Reef (Ligurian Sea, NW Mediterranean) have been studied, although discontinuously, since 1937 thus making available both detailed descriptive information and scanty quantitative data: while the former was useful to understand the natural history of the ecosystem, the analysis of the latter was of paramount importance to provide a formal measure of change over time. Epibenthic assemblages remained comparatively stable until the 1990s, when species replacement, invasion by alien algae, and biotic homogenisation occurred within few years, leading to a new and completely different ecosystem state. The shift experienced by the coralligenous assemblages of Mesco Reef was probably induced by a combination of seawater warming and local human pressures, the latter mainly resulting in increased water turbidity; in turn, cumulative stress may have favoured the establishment of alien species. This study showed that the combined analysis of quantitative and descriptive historical data represent a precious knowledge to understand ecosystem trends over time and provide help to identify baselines for ecological management.

We report on the development of a submersible probe for the simultaneous potentiometric detection of carbonate, calcium, and pH in seawater. All-solid-state electrodes incorporating nanomaterials provide an adequate response time (<10 s), stability (drifts of <0.9 mV h −1 ), reproducibility (calibration parameter deviation of <0.7%), and accuracy (deviation of <8% compared to reference techniques) for realtime monitoring of seawater using a flow system. The functioning of the deployable prototype was checked in an outdoor mesocosm and via long-term monitoring in Genoa Harbor. The electrodes worked properly for 3 weeks, and the system demonstrated the capability to autonomously operate with routines for repetitive measurements, data storage, and management. In situ profiles observed in Genoa Harbor and Arcachon Bay were validated using on site and ex situ techniques. The validation of in situ-detected carbonate is a challenge because both re-equilibration of the sample with atmospheric CO 2 and the use of apparent thermodynamic constants for speciation calculations lead to some differences (<20% deviation). The submersible probe is a promising tool for obtaining rapid and trustworthy information about chemical levels in marine systems. Moreover, the fluidic approach allows for the integration of other ion sensors that may require sample pretreatment.

A new submersible probe for the in situ detection of nitrate, nitrite, and chloride in seawater is presented. Inline coupling of a desalination unit, an acidification unit, and a sensing flow cell containing all-solid-state membrane electrodes allows for the potentiometric detection of nitrate and nitrite after removal of the key interfering ions in seawater, chloride and hydroxide. Thus, the electrodes exhibited attractive analytical performances for the potentiometric detection of nitrate and nitrite in desalinated and acidified seawater: fast response time ( t < 12 s), excellent stability (long-term drifts of <0.5 mV h), good reproducibility (calibration parameter deviation of <3%), and satisfactory accuracy (uncertainties <8%Diff compared to reference technique). The desalination cell, which can be repetitively used for about 30 times, may additionally be used as an exhaustive, and therefore calibration-free, electrochemical sensor for chloride and indirect salinity detection. The detection of these two parameters together with nitrate and nitrite may be useful for the correlation of relative changes in macronutrient levels with salinity cycles, which is of special interest in recessed coastal water bodies. The system is capable of autonomous operation during deployment, with routines for repetitive measurements (every 2 h), data storage and management, and computer visualization of the data in real time. In situ temporal profiles observed in the Arcachon Bay (France) showed valuable environmental information concerning tide-dependent cycles of nitrate and chloride levels in the lagoon, which are here observed for the first time using direct in situ measurements. The submersible probe based on membrane electrodes presented herein may facilitate the study of biogeochemical processes occurring in marine ecosystems by the direct monitoring of nitrate and nitrite levels, which are key chemical targets in coastal waters.

No abstract

No abstract