Cost-effective fractionation (pretreatment) of lignocellulosic biomass is necessary to enable its large-scale use as a source of liquid fuels, bio-based materials and bio-derived chemicals. While a number of ionic liquids (ILs) have proven capable of highly effective pretreatment, their high cost presents a barrier to commercial viability. In this study, we investigate in detail the application of the low-cost (ca. $1 kg−1) ionic liquid triethylammonium hydrogen sulfate for the fractionation of the grass Miscanthus x giganteus into a cellulose rich pulp, a lignin and a distillate. We found that up to 85% of the lignin and up to 100% of the hemicellulose were solubilized into the IL solution. The hemicellulose dissolved mainly in monomeric form, and pentoses were partially converted into furfural. Up to 77% of the glucose contained in the biomass could be released by enzymatic saccharification of the pulp. The IL was successfully recovered and reused four times. A 99% IL recovery was achieved each time. Effective lignin removal and high saccharification yields were maintained during recycling, representing the first demonstration that repeated IL use is feasible due to the self-cleaning properties of the non-distillable solvent. We further demonstrate that furfural and acetic acid can be separated quantitatively from the non-volatile IL by simple distillation, providing an easily recoverable, valuable co-product stream, while IL degradation products were not detected. We further include detailed mass balances for glucose, hemicellulose and lignin, and a preliminary techno-economic estimate for the fractionation process. This is the first demonstration of an efficient and repeated lignocellulose fractionation with a truly low-cost IL, and opens a path to an economically viable IL-based pretreatment process

Deconstruction with low-cost ionic liquids (ionoSolv) is a promising method to pre-condition lignocellulosic biomass for the production of renewable fuels, materials and chemicals. This study investigated process intensification strategies for ionoSolv pretreatment of Miscanthus × giganteus with the low-cost ionic liquid triethylammonium hydrogen sulfate ([TEA] [HSO 4 ]) in the presence of 20 wt% water, using high temperatures and a high solid to solvent loading of 1 : 5 g/g. The temperatures investigated were 150, 160, 170 and 180°C. We discuss the effect of pretreatment temperature on lignin and hemicellulose removal, cellulose degradation and enzymatic saccharification yields. We report that very good fractionation can be achieved across all investigated temperatures, including an enzymatic saccharification yield exceeding 75% of the theoretical maximum after only 15 min of treatment at 180°C. We further characterised the recovered lignins, which established some tunability of the hydroxyl group content, subunit composition, connectivity and molecular weight distribution in the isolated lignin while maintaining maximum saccharification yield. This drastic reduction of pretreatment time at increased biomass loading without a yield penalty is promising for the development of a commercial ionoSolv pretreatment process.

Softwood is an abundantly available feedstock for the bio-based industry, however, achieving cost-effective sugar release is particularly challenging owing to its guaiacyl-only lignin.

We have identified elements present in the ionic liquid–vacuum outer atomic surface of 23 ionic liquids using high sensitivity low-energy ion scattering (LEIS), a very surface sensitive technique.

A number of ionic liquids (ILs) with economically attractive production costs have recently received growing interest as media for the delignification of a variety of lignocellulosic feedstocks. Here we demonstrate the use of these low-cost protic ILs in the deconstruction of lignocellulosic biomass (Ionosolv pretreatment), yielding cellulose and a purified lignin. In the most generic process, the protic ionic liquid is synthesized by accurate combination of aqueous acid and amine base. The water content is adjusted subsequently. For the delignification, the biomass is placed into a vessel with IL solution at elevated temperatures to dissolve the lignin and hemicellulose, leaving a cellulose-rich pulp ready for saccharification (hydrolysis to fermentable sugars). The lignin is later precipitated from the IL by the addition of water and recovered as a solid. The removal of the added water regenerates the ionic liquid, which can be reused multiple times. This protocol is useful to investigate the significant potential of protic ILs for use in commercial biomass pretreatment/lignin fractionation for producing biofuels or renewable chemicals and materials.

In the present study, we used a low-cost protic ionic liquid, 1-methylimidazolium chloride, to simultaneously fractionate heavy metal contaminated wood and extract the metals from the wood at elevated temperature and short reaction time.

No abstract

Deconstruction of lignocellulosic biomass with low-cost ionic liquids (ILs) has proven to be a promising technology that could be implemented in a biorefinery to obtain renewable materials, fuels and chemicals.