Loblolly pine (Pinus taeda L.) is a major plantation species grown in the southern United States, producing wood having a multitude of uses including pulp and lumber production. Specific gravity (SG) is an important property used to measure the quality of wood produced, and it varies regionally and within the tree with height and radius. SG at different height levels was measured from 407 trees representing 135 plantations across the natural range of loblolly pine. A three-segment quadratic model and a semiparametric model were proposed to explain the vertical and regional variations in SG. Both models were in agreement that a stem can be divided into three segments based on the vertical variation in SG. Based on the fitted models, the mean trend in SG of trees from the southern Atlantic Coastal Plain and Gulf Coastal Plain was observed to be higher than in other physiographical regions (Upper Coastal Plain, Hilly Coastal Plain, northern Atlantic Coastal Plain, and Piedmont). Maps showing the regional variation in disk SG at a specified height were also developed. Maps indicated that the stands in the southern Atlantic Coastal Plain and Gulf Coastal Plain have the highest SG at a given height level.

No abstract

Loblolly pine is increasingly grown on intensively managed plantation forests that yield excellent growth; however, lumber cut from these trees often contains a large percentage of juvenile wood which negatively impacts strength and stiffness. Because of changing forest management and mill practices the design values for visually graded southern pine were updated in 2013 to more accurately account for the material properties available in commerce. This study was undertaken to assess the bending strength and stiffness of loblolly pine lumber from intensively managed stands located on the Georgia Lower Coastal Plain. Eight hundred and forty-one pieces of lumber sawn from 93 trees age 24-33 years were tested in four-point bending according to ASTM International standards. The No. 1 grade MOE 15 (11.9 GPa) was greater than the current (11.0 GPa) design value and comparable to the previous (11.7 GPa) design value. The No. 2 grade MOE 15 (10.6 GPa) was greater than the current (9.7 GPa) design value but slightly less than the previous (11.0 GPa) design values. The No. 3 grade MOE 15 (9.3 GPa) was between the current (9.0 GPa) design value and the previous (9.7 GPa) design value. Altogether, these results point to the MOE 15 mean values being reasonably comparable to the previous design values and currently meeting or exceeding the current design values for visually graded southern pine lumber.

Abstract:With conifer plantations having an increasingly important role in meeting the fiber needs of society, an understanding of the effect of silvicultural practices on wood quality is critical. The perception of wood quality varies, making it hard to define in a single statement; however, possibly the most succinct definition is "a measure of the aptness of wood for a given use". In general, properties that have a positive influence on a specific product assist in defining changes in wood quality. Since wood properties exhibit large variability within annual rings, within trees, and among trees in a stand, and have both genetic and environmental components (i.e., vary with different physiographical regions), it is imperative to have an understanding of wood properties at multiple levels. In this paper, we review the typical variation patterns in wood properties of conifers, with specific emphasis on loblolly pine (Pinus taeda L.), and radiata pine (Pinus radiata D.Don), two of the most common conifer plantation species globally. We also describe the impact of conventional silvicultural treatments on wood quality. Modeling efforts to predict variation in wood properties within trees, and in response to silvicultural treatments are also summarized.