No abstract

The knowledge of error nature in wireless channels is an essential constituent of efficient communication protocol design. To this end, this paper is the first comprehensive bitand symbol-level analysis of IEEE 802.15.4 transmission errors in industrial environments. The intention with this paper is to extract the error properties relevant for future improvements of wireless communication reliability and coexistence of radio systems in these harsh conditions. An extensive set of bit-error traces was collected in a variety of scenarios and industrial environments, showing that error behavior is highly dependent on the cause of packet corruption. It is shown that errors inflicted by multipath fading and attenuation exhibit different properties than those imposed by IEEE 802.11 interference. The statistical behavior of these two patterns is concurrently investigated in terms of differences in bit-error distribution, error burst length, channel memory length, and the scale of packet corruption. With these conclusions at hand, abiding to the computational constraints of embedded sensors and the statistical properties of bit-errors, a Reed-Solomon (15,k) block code is chosen to investigate the implications of bit-error nature on practical aspects of channel coding and interleaving. This paper is concluded by a number of findings of high practical relevance, concerning the optimal type, depth, and meaningfulness of interleaving.Index Terms-Error patterns, forward error correction (FEC), IEEE 802.15.4, industrial wireless sensor network (WSN), interleaving.

5G is finally here. Initial deployments are already operational in several major cities and first 5G-capable devices are being released. Though it is not limited only to millimeter wave deployments, the main promise of 5G lies in the utilization of the high bandwidth available at high frequencies. However, high-frequency deployments are coverage-limited and require denser placement of base stations, which can increase the cost significantly. One of the main contributing factors to the cost is fiber deployment. Integrated access backhauling (IAB), where part of the wireless spectrum is used for the backhaul connection of base stations instead of fiber, is an attractive solution that could make dense deployments economically viable. With this main objective, 3GPP is in the process of standardizing multi-hop IAB networks. This paper provides an overview of the main features of the multi-hop IAB 3GPP rel-16 standard and the rationale behind the design choices.

Wireless sensor network communication in industrial environments is compromised by interference, multipath fading, and signal attenuation. In that respect, accurate channel diagnostics is imperative to selecting the adequate countermeasures. This paper presents the lightweight packet error discriminator (LPED) that infers the wireless link condition by distinguishing between errors caused by multipath fading and attenuation, and those inflicted by interfering wideband singlechannel communication systems (e.g., IEEE 802.11b/g), based on the differences in their error footprints. The LPED uses forward error correction in a novel context, namely, to determine the symbol error density, which is then fed to a discriminator for error source classification. The classification criteria are derived from an extensive set of error traces collected in three different types of industrial environments, and verified on a newly collected set of error traces. The proposed solution is evaluated both offline and online, in terms of classification accuracy, speed of channel diagnostics, and execution time. The results show that in ≥91% of cases, a single packet is sufficient for a correct channel diagnosis, accelerating link state inference by at least 270%, compared with the relevant state-of-the-art approaches. The execution time of LPED, for the worst case of packet corruption and maximum packet size, is below 30 ms with ≤3% of device memory consumption. Finally, live tests in an industrial environment show that LPED quickly recovers from link outage, by losing up to two packets on average, which is only one packet above the theoretical minimum.Index Terms-IWSN, interference recognition, error discrimination, FEC, bit error traces. 1530-437X

No abstract

Communication reliability is the ultimate priority in safety-critical wireless sensor network (WSN) communication. Surprisingly enough, the enormous potential of error control on direct sequence spread spectrum (DSSS) chips in IEEE 802.15.4 has been completely overlooked by the WSN community, possibly due to incorrect presumptions, such as the concerns about computational overhead. Current error-correction schemes in WSN counteract the error process once the errors have already propagated to bit-and packet-level. Motivated by the notion that errors should be confronted at the earliest stage, this work presents CLAP, a novel method that tremendously improves the error correction in WSN by fortifying the IEEE 802.15.4 Physical layer (PHY) with straightforward manipulations of DSSS chips. CLAP is implemented on a software-defined radio platform, and evaluated on real error traces from heavily WLAN-interfered IEEE 802.15.4 transmissions at 3 different environments. CLAP boosts the number of corrected packets by 1.78-6.88 times on severely interfered links, compared to two other state-of-the-art schemes. The overhead in terms of computational complexity is about 10% of execution time of the OQPSK demodulator in the legacy IEEE 802.15.4 receiver chain. Index Terms-WSN, IEEE 802.15.4, chip error correction.

Abstract-Noise and interference make a substantial impact on wireless transmissions in industrial environments, resulting in frequent erroneous packet deliveries. Existing industrial communication standards adopt the IEEE 802.15.4 specification, which provides no means to correct the detected errors. We propose an IEEE 802.15.4-compliant Forward Error Correction-based approach that can be easily retrofitted into the standard without the need for any kind of interaction with chip manufacturers or standardization bodies. We evaluate the approach on link-and network-level scenarios. Improvement of reliability by using FEC can yield multiple benefits: a reduced number of retransmissions, and lower average latency, to name a few. With respect to the uncoded system, the proposed solution provides identical coding gain as the traditional FEC method, at a significantly lower computational load of decoding.

No abstract