The increasing availability of complex multivariate data yielded by sensor technologies permits qualitative and quantitative data analysis for material characterization. Multivariate data are hard to understand by visual inspection and intuition. Thus, data-driven models are required to derive study-specific insights from large datasets. In the present study, a partial least squares regression (PLSR) model was used for the prediction of elemental concentrations using the mineralogical techniques mid-wave infrared (MWIR) and long-wave infrared (LWIR) combined with data fusion approaches. In achieving the study objectives, the usability of the individual MWIR and LWIR datasets for the prediction of the concentration of elements in a polymetallic sulphide deposit was assessed, and the results were compared with the outputs of low- and mid-level data fusion methods. Prior to low-level data fusion implementation, data filtering techniques were applied to the MWIR and LWIR datasets. The pre-processed data were concatenated and a PLSR model was developed using the fused data. The mid-level data fusion was implemented by extracting features using principal component analysis (PCA) scores. As the models were applied to the MWIR, LWIR, and fused datasets, an improved prediction was achieved using the low-level data fusion approach. Overall, the acquired results indicate that the MWIR data can be used to reliably predict a combined Pb–Zn concentration, whereas LWIR data has a good correlation with the Fe concentration. The proposed approach could be extended for generating indicative element concentrations in polymetallic sulphide deposits in real-time using infrared reflectance data. Thus, it is beneficial in providing elemental concentration insights in mining operations.
Despite significant recent advancements in the sensor technologies, the use of sensors for raw material characterization in the mining industry remains limited. The aim of the present study was to assess the utility of applying the mid-wave infrared (MWIR) reflectance data acquired by the use of a handheld Fourier-transform infrared spectrometer (FTIR), combined with partial least squares-discriminant analysis (PLS-DA), for the characterization of a polymetallic sulphide ore deposit. In achieving the study objectives, focus was given to the MWIR portion of the FTIR dataset, as it is the least explored region of the infrared spectrum in mineral characterization studies. Three datasets-covering different wavelength ranges-were generated from the FTIR spectral data, namely the full FTIR range (2.5-15 µm), MWIR (2.5-7 µm) and long-wave infrared (LWIR: 7-15 µm), in order to investigate the associated information level of each defined wavelength region separately. Design of experiment was developed to determine the optimal data filtering techniques. Using the processed data and PLS-DA, a series of calibration and prediction models were developed for ore and waste materials separately. As the models applied to the MWIR data showed a successful classification rate of 86.3% for sulphide ore-waste discrimination, similarly using the full spectral FTIR dataset, a correct classification rate of 89.5% was achieved. This indicates that MWIR spectral range includes informative signals that are sufficient for classifying the material into ore or waste. The proposed approach could be extended for automating the sulphide ore-waste discrimination process, thus greatly benefiting marginally economical mining operations.
Sensor technologies provide relevant information on the key geological attributes in mining. The integration of data from multiple sources is advantageous in making use of the synergy among the outputs for the enhanced characterisation of materials. Sensors produce various types of data. Thus, the fusion of these data requires innovative data-driven strategies. In the present study, the fusion of image and point data is proposed, aiming for the enhanced classification of ore and waste materials in a polymetallic sulphide deposit at 3%, 5% and 7% cut-off grades. The image data were acquired in the visible-near infrared (VNIR) and short-wave infrared (SWIR) regions of the electromagnetic spectrum. The point data cover the mid-wave infrared (MWIR) and long-wave infrared (LWIR) spectral regions. A multi-step methodological approach was developed for the fusion of the image and point data at multiple levels using the supervised and unsupervised classification techniques. Several possible combinations of the data blocks were evaluated to select the optimal combinations in an optimised way. The obtained results indicate that the individual image and point techniques resulted in a successful classification of ore and waste materials. However, the classification performance greatly improved with the fusion of image and point data, where the K-means and support vector classification (SVC) models provided acceptable results. The proposed approach enables a significant reduction in data volume while maintaining the relevant information in the spectra. This is principally beneficial for the integration of data from high-throughput and large data volume sources. Thus, the effectiveness and practicality of the approach can permit the enhanced separation of ore and waste materials in operational mines.
Accurate quantitative mineralogical data has significant implications in mining operations. However, quantitative analysis of minerals is challenging for most of the sensor outputs. Thus, it requires advances in data analytics. In this work, data fusion approaches for integrating datasets pertaining to the mid-wave infrared (MWIR) and long-wave infrared (LWIR) spectral regions are proposed, aiming to facilitate more accurate prediction of SiO 2 , Al 2 O 3 , and Fe 2 O 3 concentrations in a polymetallic sulphide deposit. Two approaches of low-level data fusion were applied to these datasets. In the first approach, the pre-processed blocks of MWIR and LWIR data were concatenated to form a fused data block. In the second approach, a prior variable selection was performed to extract the most important features from the MWIR and LWIR datasets. The extracted informative features were subsequently concatenated to form a new fused data block. Next, prediction models that link the mineralogical concentrations with the infrared reflectance spectra were developed using partial-least squares regression (PLSR), principal component regression (PCR) and support vector regression (SVR) analytical techniques. These models were applied to the fused data blocks as well as the individual (MWIR and LWIR) data blocks. The obtained results indicate that SiO 2 , Al 2 O 3 , and Fe 2 O 3 mineral concentrations can be successfully predicted using both MWIR and LWIR spectra individually, but the prediction performance greatly improved with data fusion; where the PLSR, PCR, and SVR models provided good and acceptable results. The proposed approach could be extended for online analysis of mineral concentrations in different deposit types. Thus, it would be highly beneficial in mining operations, where indications of mineralogical concentrations can have significant financial implications.for geometallurgical applications is not limited to knowledge on the grades of valuable elements and their variability, but also extends to the gangue minerals, as their composition and volume also play a crucial role in ore processing. Extant studies highlight the importance of mineralogical information for the sustainability and energy efficiency of geometallurgical processes [1,2]. Ore minerals occur in veins, disseminated in the host rock and/or in pores with varying concentrations of other associated minerals such as silica, oxides and carbonates. The concentration of these minerals can be associated with the metallurgical behaviour of the ore minerals. Therefore, quantitative mineralogical information on the co-occurring minerals is one of the crucial parameters for the optimisation of ore processing.Despite rapid advances in sensor technologies, there is still a demand for novel ideas to enable quantitative investigations of mineralogical compositions using sensor-derived data. In addition, in-situ application of sensor technologies requires portable and high-speed systems. Portable sensor technologies (such as X-ray fluorescence-XRF, and short-wave in...
The use of sensor technologies for material characterization is rapidly growing and innovative advancement is observed. However, the use of sensor combinations for a raw material characterization in mining is very limited and automation of the material identification process using a combined sensor signal is not defined. Potential sensor technologies for raw material characterization were evaluated based on the applicability and technological maturity. To ensure a rapid implementation of the Real-time mining (RTM) project concept, mature technologies such as Red Green Blue (RGB) imaging, Visible Near Infrared (VNIR) hyperspectral imaging, Short Wave Infrared (SWIR) hyperspectral imaging, Fourier-Transform Infrared Spectroscopy (FTIR), Laser Induced Breakdown Spectroscopy (LIBS) and Raman were selected. Each selected technology was assessed for automation in sensing and applicability (for characterization of the test case materials). Based on the results the sensor data were further considered for data fusion. The proposed sensor combinations approach encompasses three levels of data fusion: low-level, mid-level and high-level. The data of the different sensors are fused together in order to acquire a wide range of mineral properties within each lithotype and an improved classification and predictive models. The preferred level of data fusion and preferred sensor data combinations will be used to develop a multi-variate statistical interpretation rule which relates combination of sensors signals with raw material properties. Thus a tool which integrates the combined sensor signal with materials properties will be developed and used to automate the material characterization process.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.