This paper presents an automatic procedure using the membrane theory of shells to analyse and define geometries for axisymmetric domes subjected to its own weight, varying its thickness and bend radius, to obtain constant normal stresses along the structure. The procedure offers a great advantage over the analytic solution of the problem and usual shell numerical methods when one wants to determine the dome geometry with constant stresses, since the presented procedure has the goal stress as input value for obtaining the geometry, as opposed to the usual numerical methods, where the reverse occurs. An example clarifies the differences between a spherical dome with constant thickness and a dome subjected to constant stress. The convergence of the method for a specific material weight and stress for a dome are also presented.
A normativa vigente, NBR 16055:2012, define parede de concreto como elemento estrutural autoportante, moldado in loco, no qual contém comprimento maior que dez vezes sua espessura, sendo capaz de suportar carga no mesmo plano da parede. Além da normativa brasileira existem diversos códigos internacionais, tal como o ACI 318:2019 - Building Code Requirements for Structural Concrete, e o australiano AS 3600:2009 - Concrete Structures. Cada norma possui uma formulação própria para o cálculo da resistência do elemento de parede de concreto. O código brasileiro e o código australiano convergem em relação a adotar a contribuição das vinculações laterais para resistência da parede. Já o código norte americano faz menção somente nas vinculações topo-base. Analogamente as estruturas em Alvenaria Estrutural, o caminhamento das cargas verticais pode ocorrer na superfície do elemento de parede, sendo possível utilizar os modelos de cálculo consolidados em bibliografias de Alvenaria Estrutural (PIS, GIP e MPT), tornando este estudo válido para análise estrutural destes dois sistemas. Ao longo deste trabalho foram calculados e analisados os resultados dos esforços solicitantes de cada procedimento. Posteriormente, com auxílio do software comercial SAP2000, foi lançada uma estrutura utilizando o Modelo Pórtico Tridimensional, realizando suas respectivas análises numéricas. Ao final destas análises, foi possível observar que o modelo sem interações entre paredes foi capaz de desempenhar de maneira satisfatória a distribuição dos esforços para as estruturas adotadas neste estudo, quando comparados com os modelos com interação entre paredes e numérico.
A obra intitulada "Engenharias em foco vol.5", publicada pela Brazilian Journals Publicações de Periódicos e Editora, apresenta um conjunto de quinze capítulos que visa abordar conhecimentos disciplinares ligadas à área temática das Engenharias. A seguir serão apresentados os capítulos que compõem este ebook. Dessa forma, agradecemos aos autores por todo esforço e dedicação que contribuíram para a construção dessa obra, e esperamos que este livro possa colaborar para a discussão e entendimento de temas relevantes para grande área da Engenharia, orientando docentes, estudantes, gestores e pesquisadores à reflexão sobre os assuntos aqui apresentados.
The current regulations, NBR 16055:2012, defines concrete wall as self-supporting structural element, molded in loco, in which it contains a length greater than ten times its thickness, being able to withstand load in the same plane of the wall. In addition to Brazilian regulations there are several international codes, such as ACI 318:2019 - Building Code Requirements for Structural Concrete, and The Australian AS 3600:2009 - Concrete Structures. Each standard has its own formulation for calculating the strength of the concrete wall element. The Brazilian code and the Australian code converge in relation to adopting the contribution of lateral links to wall resistance. The North American code mentions only the top-base links. Similarly the structures in Structural Masonry, the walking of vertical loads can occur on the surface of the wall element, being possible to use the calculation models consolidated in structural masonry bibliographies (PIS, GIP and MPT), making this study valid for structural analysis of these two systems. Throughout this work, the results of the requesting efforts of each procedure were calculated and analyzed. Later, with the help of commercial software SAP2000, a structure was launched using the Three-Dimensional Portico Model, performing their respective numerical analyses. At the end of these analyses, it was possible to observe that the model without interactions between walls was able to satisfactorily perform the distribution of efforts for the structures adopted in this study, when compared with models with interaction between walls and numerical.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.