No abstract

Abstract:The accuracy of different workflows using Structure-from-Motion and Multi-View-Stereo techniques (SfM-MVS) is tested. Twelve point clouds of the Corral del Veleta rock glacier, in Spain, were produced with two different software packages (123D Catch and Agisoft Photoscan), using Low Dynamic Range images and High Dynamic Range compositions (HDR) for three different years (2011, 2012 and 2014). The accuracy of the resulting point clouds was assessed using benchmark models acquired every year with a Terrestrial Laser Scanner. Three parameters were used to estimate the accuracy of each point cloud: the RMSE, the Cloud-to-Cloud distance (C2C) and the Multiscale-Model-to-Model comparison (M3C2). The M3C2 mean error ranged from 0.084 m (standard deviation of 0.403 m) to 1.451 m (standard deviation of 1.625 m). Agisoft Photoscan overcome 123D Catch, producing more accurate and denser point clouds in 11 out 12 cases, being this work, the first available comparison between both software packages in the literature. No significant improvement was observed using HDR pre-processing. To our knowledge, this is the first time that the geometrical accuracy of 3D models obtained using LDR and HDR OPEN ACCESSRemote Sens. 2015, 7 10270 compositions are compared. These findings may be of interest for researchers who wish to estimate geomorphic changes using SfM-MVS approaches.

Abstract:In this paper, two methods based on computer vision are presented in order to produce dense point clouds and high resolution DEMs (digital elevation models) of the Corral del Veleta rock glacier in Sierra Nevada (Spain). The first one is a semi-automatic 3D photo-reconstruction method (SA-3D-PR) based on the Scale-Invariant Feature Transform algorithm and the epipolar geometry theory that uses oblique photographs and camera calibration parameters as input. The second method is fully automatic (FA-3D-PR) and is based on the recently released software 123D-Catch that uses the Structure from Motion and MultiView Stereo algorithms and needs as input oblique photographs and some measurements in order to scale and geo-reference the resulting model. The accuracy of the models was tested using as benchmark a 3D model registered by means of a Terrestrial Laser Scanner (TLS). The results indicate that both methods can be applied to micro-scale study of rock glacier morphologies and processes with average distances to the TLS point cloud of 0.28 m and 0.21 m, for the SA-3D-PR and the FA-3D-PR methods, respectively. The performance of the models was also tested by means of the dimensionless relative precision ratio parameter resulting in figures of 1:1071 and 1:1429 for the SA-3D-PR and the FA-3D-PR methods, respectively. Finally, Digital Elevation Models (DEMs) of the study area were produced and compared with the TLS-derived DEM. The

No abstract