RESUMO: O Brasil é o maior produtor de cana-de-açúcar (Saccharum spp.) do mundo, portanto, o seu cultivo é de grande importância para o agronegócio brasileiro. A mecanização da colheita da cana-de-açúcar se tornou necessária, pois a queima da cultura está, gradativamente, sendo proibida no Brasil e, sem essa prática, o corte manual se torna ineficiente e dispendioso. Com o aumento da colheita mecanizada surgiram as inovações do setor para o aumento do rendimento dessa operação e, nos últimos anos, a tentativa de se desenvolver uma colhedora especifica para duas linhas simultâneas se tornou realidade. O objetivo desse trabalho foi avaliar o desempenho operacional e energético de duas colhedoras de cana-de-açúcar para uma e duas linhas da cultura, em espaçamento convencional. Os ensaios foram conduzidos em um canavial colhido sem queima prévia, da variedade RB855156, em seu segundo corte, com espaçamento entre linhas de 1,5 m, produtividade agrícola estimada de 83,5 t ha -1 e porte ereto. As colhedoras foram avaliadas em 3 velocidades de deslocamento (2,5 km h -1 , 3,5 km h -1 e 5 km h -1 ) para realizar avaliações do desempenho das máquinas. A média de capacidade de campo efetiva foi de 0,56 ha h -1 para a colhedora de uma linha e de 1,08 ha h -1 para a colhedora de duas linhas, o consumo de combustível por tonelada colhida foi de 0,97 L t -1 para a colhedora de uma linha contra 0,65 L t -1 para a colhedora de duas linhas. Em todos os casos a colhedora de duas linhas apresentou maior eficiência e produtividade do que a de colhedora de uma linha. PALAVRAS-CHAVES:Mecanização Agrícola, consumo de combustível, índice de impureza mineral e vegetal, eficiência, produtividade.ABSTRACT: Brazil is the largest producer of sugarcane (Saccharum spp.) in the world, so its cultivation is of great importance for Brazilian agribusiness. The mechanized harvesting of cane sugar has become necessary because the culture of the burning is gradually being banned in Brazil and, without this practice, manual cutting becomes inefficient and costly. With increasing mechanical harvesting, emerged the sector innovations to increase the yield of this operation and, in recent years, the attempt to develop a harvester specifies for two simultaneous rows came true. The aim of this study was to evaluate the operational and energy performance of two harvesters of sugarcane, for one and two rows of planting. The tests were conducted in a sugarcane field of the variety RB855156 harvested without burning, at its second cut, with line spacing of 1.5 m, estimated agricultural productivity of 83.5 t ha -1 . The harvester was evaluated in three forward speeds (2.5 km h -1 , 3,5 km h -1 and 5 km h -1 ) to carry out evaluations of the performance of the machines. The average effective field capacity was 0.56 ha h -1 for one row harvested and 1.08 ha h -1 for two rows harvested, fuel consumption per ton of sugarcane harvested was 0.97 L t -1 for one row and 0.65 L t -1 for two rows. In all cases, the two rows showed higher efficiency and productivity agains...
In the mechanized harvest, the quality of the basal cut becomes one of the most important factors because it is associated with sprouting of the cane field. The objective of this work was to evaluate the influence of speed at cutting height and damage to the rootstock in function of mechanized harvesting of sugarcane. The variety used was CTC 15, with an average yield of 92.5 t ha-1. The mechanized harvest was conducted without previous burning of the cane field, in an area with a slope of 6% and a spacing of 1.5 meters between rows of planting. Three speeds were selected for movement of the harvester: V1: 3.0, V2: 5.0 and V3: 7.0 km h-1, performed with four replications. The evaluation of the quality of the mechanized harvest in relation to the basal cut was determined with the evaluation of the remaining stumps and the damages caused to rootstocks after the passage of the harvester. The height of cut was measured with a tape measure. For the damages to rootstocks, the chi-square test was applied. The cut height measurements were submitted to ANOVA and the averages were analyzed by Tukey test at 5% probability. The results showed that increase in speed during the operation of mechanized harvesting of sugarcane increased the average height of cut in evaluated treatments, as well as the damages to rootstocks which was higher according to the increase in the speed of the harvester. The increase in the speed of displacement of the sugarcane harvester influenced the height of the cut and the damage to the rootstock.
Sugarcane (Saccharum spp.) stands out as one of the main crops of Brazilian agribusiness. Currently, the crop harvesting process is predominantly mechanized. The objective was to evaluate the losses and impurities in the mechanized harvest of sugarcane as a function of working speed and rotation of the primary extractor. The experiment was conducted in a sugarcane harvested without previous burning, using the variety CTC 15 in its first cutting stage, classified as upright. The row spacing was 1.5 m and the average crop yield was 92.5 Mg ha -1 . A single-row harvester was used, operating at three working speeds, being V1 (3.0 km h -1 ), V2 (5.0 km h -1 ) and V3 (7.0 km h -1 ). Two rotations of the primary extractor were used, R1 (700 rpm) and R2 (1000 rpm). In the experiment, the loss of raw material and the vegetable impurities were evaluated shortly after the harvester went through the experimental area. With the highest rotation of the primary extractor, there were average levels of vegetable impurities (4 to 6%), and with the lowest rotation, there were high levels (> 7%). Levels for plant losses were low (< 2.5%) for all evaluated treatments.Additional keywords: evaluation; mechanization; performance; quality. ResumoA cana-de-açúcar (Saccharum spp.) destaca-se como uma das principais culturas do agronegócio brasileiro. Atualmente, o processo de colheita da cultura é, predominantemente, realizado de forma mecanizada. Objetivouse avaliar as perdas e as impurezas vegetais na colheita mecanizada de cana-de-açúcar em função da velocidade de trabalho e da rotação do extrator primário. O experimento foi conduzido em um canavial colhido sem queima prévia, sendo utilizada a variedade CTC 15, em seu primeiro estágio de corte e com porte classificado como ereto. O espaçamento entre fileiras foi de 1,5 m, e a produtividade média da cultura, de 92,5 Mg ha -1 . A colhedora utilizada foi de uma linha, operando em três velocidades de trabalho, sendo V1 (3,0 km h -1 ), V2 (5,0 km h -1 ) e V3 (7,0 km h -1 ). Foram utilizadas duas rotações do extrator primário, sendo a R1 de 700 rpm e a R2 de 1.000 rpm. No experimento, foram avaliadas a perda de matéria-prima e as impurezas vegetais logo após a passagem da colhedora na área experimental. As impurezas vegetais com a maior rotação do extrator primário apresentaram níveis médios (4 a 6%), e a menor rotação do extrator primário, níveis altos (> 7%). Os níveis para perdas vegetais foram baixos (< 2,5%) para todos os tratamentos avaliados.Palavras-chave adicionais: avaliação; desempenho; mecanização; qualidade.
DESEMPENHO ENERGÉTICO DE COLHEDORAS DE CANA-DE-AÇÚCAR EM DIFERENTES PRODUTIVIDADES AGRÍCOLAS E VELOCIDADES DE TRABALHO FERNANDA SCARANELLO DRUDI1, MURILO BATTISTUZZI MARTINS2, JOÃO VITOR PAULO TESTA3, CARLOS RENATO GUEDES RAMOS4, KLÉBER PEREIRA LANÇAS5 1 Departamento de Engenharia Rural, Universidade Estadual Paulista, rua: José Barbosa de Barros, 1780, Jardim Paraiso, 18610-034, Botucatu, São Paulo, Brasil, fernandadrudi@gmail.com 2 Departamento de Agronomia, Universidade Estadual de Mato Grosso do Sul, Unidade Universitária de Cassilândia, Rodovia MS-306 – km 6,4, 79540-000, Cassilândia, Mato Grosso do Sul, Brasil, murilo.martins@uems.br 3 Departamento de Engenharia Rural, Universidade Estadual Paulista, rua: José Barbosa de Barros, 1780, Jardim Paraiso, 18610-034, Botucatu, São Paulo, Brasil, joaovitortesta@outlook.com 4 Departamento de Engenharia Agrícola, Universidade Federal Rural da Amazônia, Rodovia PA-140, s/n, Açaizal, 68682-000, Tomé-Açu, Pará, Brasil, ramos.ufra@gmail.com 5 Departamento de Engenharia Rural, Universidade Estadual Paulista, rua: José Barbosa de Barros, 1780, Jardim Paraiso, 18610-034, Botucatu, São Paulo, Brasil, kp.lancas@unesp.br RESUMO: A expansão das lavouras de cana-de-açúcar no Brasil é um dos fatores que mais favorece a utilização e, principalmente, o desenvolvimento do sistema de colheita mecanizada. Este trabalho teve como objetivo avaliar o desempenho energético de colhedoras de cana-de-açúcar, através da repetitividade de ensaios com colhedoras de cana-de-açúcar realizados pelo Núcleo de Ensaio de Máquinas e Pneus Agroflorestais (Nempa), utilizando metodologia de diferentes autores. As colheitas ocorreram em canaviais com diversas produtividades agrícolas e em diferentes localidades do país e exterior. Foram avaliados a capacidade de colheita efetiva, o consumo de combustível (L h-1 e L t-1). Foram feitas avaliações com o dispositivo que controla a rotação do motor. Com o uso desse dispositivo, o consumo de combustível foi mais baixo para o consumo horário e por tonelada colhida. O consumo de combustível é influenciado pela produtividade da área e pela velocidade de trabalho da máquina. A metodologia utilizada no ensaio a campo de colhedoras de cana-de-açúcar, através dos dados obtidos pelo Nempa, apresentou resultados compatíveis entre si e com a bibliografia consultada, mostrando ser confiável em relação aos parâmetros de desempenho operacional da colhedora, tanto para colhedoras de uma linha como para de duas linhas. Palavras-chaves: capacidade efetiva, colheita mecanizada, consumo de combustível, mecanização agrícola, saccharium spp ENERGY PERFORMANCE OF SUGARCANE HARVESTERS IN SEVERAL AGRICULTURAL PRODUCTIVITIES AND FORWARD SPEED ABSTRACT: The expansion of sugarcane plantations in Brazil is one of the factors that most favors the use and, especially, the development of the mechanized harvesting system. The aim of this study was to evaluate the energy performance of sugarcane harvesters, based on the methodology used by the Nucleus of Agroforestry Machines and Tires (Nempa) of the College of Agricultural Sciences (FCA), Unesp, Campus of Botucatu, Sao Paulo, Brazil. The sugarcane harvests occurred in fields without prior burning with different agricultural yields and in different Brazil and abroad location. It was evaluated the crop effective capacity, fuel consumption (L h-1 and L t-1). For these evaluations, flow meters were installed in the harvester fuel supply system as well as an electronic device was used for data acquisition. Evaluations were carried out with a engine device speed control. According to this device the fuel consumption was lower for the hourly consumption and per harvested tonne. The fuel consumption is influenced by the area productivity and by the machine work speed. The methodology used in the sugar cane field trial, through the data obtained by Nempa, shown compatible results between themselves and with literature, shown be reliable in relation to the parameters of operational performance of sugarcane harvester, for a line or two. Keywords: effective capacity, mechanical harvesting, fuel consumption, agricultural mechanization, saccharium spp
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.