Prepared MWCNTs@MIPs allowed for rapid separation and selective enrichment of PFOA from an aqueous environment.

No abstract

No abstract

Perfluorooctanoic acid (PFOA) contamination in the environment is a global problem. The aqueous phase is the main medium for PFOA because of its moderate solubility. Adsorption is a feasible way to remove PFOA because of its chemical and biological stability. In this study, a new type of molecularly imprinted polymer (MIP) for the selective adsorption of PFOA in aqueous solutions was synthesized by the precipitation polymerization method with PFOA as the template molecule after optimization. The adsorption kinetics and isotherms of the MIP adsorbent toward PFOA were studied, and the effects of the pH and cations on the adsorption were investigated with batch experiments. The results show that acrylamide (AAM) was the best functional monomer, and the optimal molar ratio of PFOA to AAM to ethylene glycol dimethacrylate (crosslinker) was 1:6:25. The optimized MIP adsorbent had a high affinity for PFOA, and the uptake percentage by the MIP adsorbent was 1.3-2.5 times that of the nonimprinted polymer (NIP) when PFOA existed alone. A maximum PFOA sorption capacity of 5.45 mg/g based on the Langmuir isotherm model was achieved with the MIP adsorbent. The MIP adsorbent exhibited a high selectivity for PFOA over competitive compounds (other perfluorinated alkyl carboxylic and sulfonic acids), whereas the NIP did not. Approximately 90% of the PFOA in the mixture was removed by the MIP adsorbent; this was 18 times that of the NIP. Moreover, the regenerability of the MIP adsorbent was confirmed in five sequential adsorption-desorption cycles without a significant reduction in the PFOA uptake. V C 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43192.