The time constant selected for lock-in amplification (LIA) has a crucial impact on observed line shapes in laser heterodyne spectroscopy, in particular in the case of ground-based remote monitoring of trace gas in the atmospheric column using laser heterodyne radiometer (LHR). Conventional simulation could not allow validation of LHR spectra measured in a real and complex atmospheric environment exhibiting large temporal and spatial variability (humidity, temperature, pressure, etc) that impact significantly the measured LHR spectra profiles. High-precision spectral measurement is thus crucial to avoid any spectral distortion resulting from the measurement. In this paper, the impact of LIA time constant on spectral line shape is investigated for LHR operating in continuous laser tuning mode, based on analysis of laboratory heterodyne spectra, in terms of signal-to-noise ratio (SNR), line width broadening, absorption depth and line shift. With respect to the given frequency scanning speed in continuous mode and to the halfwidth of the absorption feature to scan, a reasonable scanning time ΔTscan, the time needed for scanning laser frequency through the halfwidth ΔνHWHM of the absorption line, equal to or longer than 14 times of the LIA time constant τ is concluded in order to efficiently reduce the noise while without significant shift and distortion of the line shape. Experimental validation was carried out using a laser heterodyne absorption spectroscopy approach in the laboratory. Four different combinations of time constants τ and scanning time ΔTscan were used to record heterodyne spectra of a CH4 absorption line near 1242.00 cm−1 in continuous laser tuning mode. An optimal combination of a scanning time of 137 ms with a time constant of 1 ms was obtained. This optimal combination was used for ground-based measurements of CH4 and N2O in the atmospheric column by LHR. The extracted LHR spectrum is in good agreement with a referenced TCCON (Total Carbon Column Observing Network) FT-IR (Fourier-transform infrared) spectrum.
A transportable laser heterodyne radiometer (LHR) based on an external cavity quantum cascade laser, operating in the mid-infrared (mid-IR) around 8 µm, was developed for ground-based remote sensing of multiple greenhouse gases. A newly available novel flexible mid-IR polycrystalline fiber was first exploited to couple solar radiation, real-time captured using a portable sun-tracker, to the LHR receiver. Compared to free space coupling of sunlight, the technique usually used nowadays in the mid-IR, such fiber coupling configuration makes the LHR system readily more stable, simpler, and robust. Operation of the LHR with quasi-shot-noise limited performance was analyzed and experimentally achieved by optimizing local oscillator power. To the best of our knowledge, no such performance approaching the fundamental limit has been reported for a transportable LHR operating at a long mid-IR wavelength around 8 µm.
C
H
4
and
N
2
O
were simultaneously measured in the atmospheric column using the developed mid-IR LHR. The experimental LHR spectrum of
C
H
4
and
N
2
O
was compared and is in good agreement with a referenced Fourier-transform infrared spectrum from the Total Carbon Column Observing Network observation site and with a simulation spectrum from atmospheric transmission modeling.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.