Abstract-In search and rescue missions, Micro Air Vehicles (MAV's) can assist rescuers to faster locate victims inside a large search area and to coordinate their efforts. Acoustic signals play an important role in outdoor rescue operations. Emergency whistles, as found on most aircraft life vests, are commonly carried by people engaging in outdoor activities, and are also used by rescue teams, as they allow to signal reliably over long distances and far beyond visibility. For a MAV involved in such missions, the ability to locate the source of a distress sound signal, such as an emergency whistle blown by a person in need of help, is therefore significantly important and would allow the localization of victims and rescuers during night time, through foliage and in adverse conditions such as dust, fog and smoke. In this paper we present a sound source localization system for a MAV to locate narrowband sound sources on the ground, such as the sound of a whistle or personal alarm siren. We propose a method based on a particle filter to combine information from the cross correlation between signals of four spatially separated microphones mounted on the MAV, the dynamics of the aerial platform, and the doppler shift in frequency of the sound due to the motion of the MAV. Furthermore, we evaluate our proposed method in a real world experiment where a flying micro air vehicle is used to locate and track the position of a narrowband sound source on the ground.

No abstract

Abstract-In a team of autonomous drones, individual knowledge about the relative location of teammates is essential. Existing relative positioning solutions for teams of small drones mostly rely on external systems such as motion tracking cameras or GPS satellites that might not always be accessible. In this letter, we describe an onboard solution to measure the 3-D relative direction between drones using sound as the main source of information. First, we describe a method to measure the directions of other robots from perceiving their engine sounds in the absence of self-engine noise. We then extend the method to use active acoustic signaling to obtain the relative directions in the presence of self-engine noise, to increase the detection range, and to discriminate the identity of robots. Methods are evaluated in real world experiments and a fully autonomous leader-following behavior is illustrated with two drones using the proposed system.

Abstract-This paper considers the question providing effective feedback of vehicle dynamic forces to a pilot in haptic teleoperation of aerial robots. We claim that the usual state-ofthe-art haptic interface, based on research motivated by robotic manipulator slaves and virtual haptic environments, does a poor job of reflecting dynamic forces of a mobile robotic vehicle to the user. This leads us to propose a novel new force feedback user interface for mobile robotic vehicles with dynamics. An analysis of the closed-loop force-displacement transfer functions experienced by the master joystick for the classical and the new approach clearly indicate the advantages of proposed formulation. Both the classical and the proposed approach have been implemented in the teleoperation of a quadrotor vehicle and we present quantitative and cognitive performance data from a user study that corroborates the expected performance advantages.

Abstract-Employing a group of independently controlled flying micro air vehicles (MAVs) for aerial coverage missions, instead of a single flying robot, increases the robustness and efficiency of the missions. Designing a group of MAVs requires addressing new challenges, such as inter-robot collision avoidance and formation control, where individual's knowledge about the relative location of their local group members is essential. A relative positioning system for a MAV needs to satisfy severe constraints in terms of size, weight, processing power, power consumption, three-dimensional coverage and price. In this paper we present an on-board audio based system that is capable of providing individuals with relative positioning information of their neighbouring sound emitting MAVs. We propose a method based on coherence testing among signals of a small onboard microphone array to obtain relative bearing measurements, and a particle filter estimator to fuse these measurements with information about the motion of robots throughout time to obtain the desired relative location estimates. A method based on fractional Fourier transform (FrFT) is used to identify and extract sounds of simultaneous chirping robots in the neighbourhood. Furthermore, we evaluate our proposed method in a real world experiment with three simultaneously flying micro air vehicles.

Abstract-Micro aerial vehicles (MAVs) are a rapidly growing area of research and development in robotics. For autonomous robot operations, localization has typically been calculated using GPS, external camera arrays, or onboard range or vision sensing. In cluttered indoor or outdoor environments, onboard sensing is the only viable option. In this paper we present an appearance-based approach to visual SLAM on a flying MAV using only low quality vision. Our approach consists of a visual place recognition algorithm that operates on 1000 pixel images, a lightweight visual odometry algorithm, and a visual expectation algorithm that improves the recall of place sequences and the precision with which they are recalled as the robot flies along a similar path. Using data gathered from outdoor datasets, we show that the system is able to perform visual recognition with low quality, intermittent visual sensory data. By combining the visual algorithms with the RatSLAM system, we also demonstrate how the algorithms enable successful SLAM.

Abstract-Localization is one of the key challenges that needs to be considered beforehand to design truly autonomous MAV teams. In this paper, we present a cooperative method to address the localization problem for a team of MAVs, where individuals obtain their position through perceiving a soundemitting beacon MAV that is flying relative to a reference point in the environment. For this purpose, an on-board audio-based localization system is proposed that allows individuals to measure the relative bearing to the beacon robot and furthermore to localize themselves and the beacon robot simultaneously, without the need for a communication network. Our method is based on coherence testing among signals of a small on-board microphone array, to obtain the relative bearing measurements, and an estimator, to fuse these measurements with sensory information about the motion of the robot throughout time, to estimate robustly the MAV positions. The proposed method is evaluated both in simulation and in real world experiments.

We present a new Autonomous Underwater Vehicle (AUV) system for cooperative environmental sensing. The AUV was specifically developed as a platform for distributed, cooperative sensing in lakes and coastal areas. In this paper we describe the prerequisite subsystems for a submersible multi-robot system and their interactions. In particular, we incorporate a distributed acoustic localisation system and distributed time-sliced communication systems into an agile, 5-DOF submersible robot that is small, easy to deploy and retrieve, with a modular environmental sensor payload for relevant scientific measurements. We also developed a distributed Hardware-In-the-Loop (HIL) simulation framework to facilitate early testing of algorithms in simulation while running final binary code on the actual robot hardware. To avoid communication overhead and real-time issues, the simulation of the vehicle dynamics and all proprioceptive sensors is performed on-board. Exteroceptive sensors are simulated by vehicle-to-vehicle communication where possible, supported by a central simulation supervisor where required. Finally, we present some preliminary experimental results of the system.