There has been an increase in research interest in wireless sensor networks (WSNs) as a result of the potential for their widespread use in many different areas like home automation, security, environmental monitoring, and many more. Despite the successes gained, the widespread adoption of WSNs particularly in remote and inaccessible places where their use is most beneficial is hampered by the major challenge of limited energy, being in most instances battery powered. To prolong the lifetime for these energy hungry sensor nodes, energy management schemes have been proposed in the literature to keep the sensor nodes alive making the network more operational and efficient. Currently, emphasis has been placed on energy harvesting, energy transfer, and energy conservation methods as the primary means of maintaining the network lifetime. These energy management techniques are designed to balance the energy in the overall network. The current review presents the state of the art in the energy management schemes, the remaining challenges, and the open issues for future research work.

Water quality monitoring (WQM) systems seek to ensure high data precision, data accuracy, timely reporting, easy accessibility of data, and completeness. The conventional monitoring systems are inadequate when used to detect contaminants/pollutants in real time and cannot meet the stringent requirements of high precision for WQM systems. In this work, we employed the different types of wireless sensor nodes to monitor the water quality in real time. Our approach used an energy-efficient data transmission schedule and harvested energy using solar panels to prolong the node lifetime. The study took place at the Weija intake in the Greater Accra Region of Ghana. The Weija dam intake serves as a significant water source to the Weija treatment plant which supplies treated water to the people of Greater Accra and parts of Central regions of Ghana. Smart water sensors and smart water ion sensor devices from Libelium were deployed at the intake to measure physical and chemical parameters. The sensed data obtained at the central repository revealed a pH value of 7. Conductivity levels rose from 196 S/cm to 225 S/cm. Calcium levels rose to about 3.5 mg/L and dropped to about 0.16 mg/L. The temperature of the river was mainly around 35°C to 36°C. We observed fluoride levels between 1.24 mg/L and 1.9 mg/L. The oxygen content rose from the negative DO to reach 8 mg/L. These results showed a significant effect on plant and aquatic life.

Radio signal propagation modeling plays an important role in the design of wireless communication systems. Various models have been developed, over the past few decades, to predict signal propagation and behavior for wireless communication systems in different operating environments. Recently, there has been an interest in the deployment of wireless sensors in soil. To fully exploit the capabilities of sensor networks deployed in soil requires an understanding of the propagation characteristics within this environment. This paper reviews the cutting-edge developments of signal propagation in the subterranean environment. The most important modeling techniques for modeling include electromagnetic waves, propagation loss, magnetic induction, and acoustic wave. These are discussed vis-a-vis modeling complexity and key parameters of the environment including electric and magnetic properties of soil. An equation to model propagation in the soil is derived from the free space model. Results are presented to show propagation losses and at different frequencies and volumetric water content. The channel capacity and the operating frequency are also analyzed against soil moisture at different soil types and antenna sizes.

Energy conservation is critical in the design of wireless sensor networks since it determines its lifetime. Reducing the frequency of transmission is one way of reducing the cost, but it must not tamper with the reliability of the data received at the sink. In this paper, duty cycling and data-driven approaches have been used together to influence the prediction approach used in reducing data transmission. While duty cycling ensures nodes that are inactive for longer periods to save energy, the data-driven approach ensures features of the data that are used in predicting the data that the network needs during such inactive periods. Using the grey series model, a modified rolling GM(1,1) is proposed to improve the prediction accuracy of the model. Simulations suggest a 150% energy savings while not compromising on the reliability of the data received.