Lithium (Li) metal is an ideal anode material for rechargeable batteries due to its extremely high theoretical specific capacity (3860 mA h g À1 ), low density (0.59 g cm À3 ) and the lowest negative electrochemical potential (À3.040 V vs. the standard hydrogen electrode). Unfortunately, uncontrollable dendritic Li growth and limited Coulombic efficiency during Li deposition/stripping inherent in these batteries have prevented their practical applications over the past 40 years. With the emergence of post-Li-ion batteries, safe and efficient operation of Li metal anodes has become an enabling technology which may determine the fate of several promising candidates for the next generation energy storage systems, including rechargeable Li-air batteries, Li-S batteries, and Li metal batteries which utilize intercalation compounds as cathodes. In this paper, various factors that affect the morphology and Coulombic efficiency of Li metal anodes have been analyzed. Technologies utilized to characterize the morphology of Li deposition and the results obtained by modelling of Li dendrite growth have also been reviewed.Finally, recent development and urgent need in this field are discussed.

Rechargeable lithium metal batteries are considered the "Holy Grail" of energy storage systems. Unfortunately, uncontrollable dendritic lithium growth inherent in these batteries (upon repeated charge/discharge cycling) has prevented their practical application over the past 40 years. We show a novel mechanism that can fundamentally alter dendrite formation. At low concentrations, selected cations (such as cesium or rubidium ions) exhibit an effective reduction potential below the standard reduction potential of lithium ions. During lithium deposition, these additive cations form a positively charged electrostatic shield around the initial growth tip of the protuberances without reduction and deposition of the additives. This forces further deposition of lithium to adjacent regions of the anode and eliminates dendrite formation in lithium metal batteries. This strategy may also prevent dendrite growth in lithium-ion batteries as well as other metal batteries and transform the surface uniformity of coatings deposited in many general electrodeposition processes.

A Li‐air battery could potentially provide three to five times higher energy density/specific energy than conventional batteries and, thus, enable the driving range of an electric vehicle to be comparable to gasoline vehicles. However, making Li‐air batteries rechargeable presents significant challenges, mostly related to the materials. Here, the key factors that influence the rechargeability of Li‐air batteries are discussed with a focus on nonaqueous systems. The status and materials challenges for nonaqueous rechargeable Li‐air batteries are reviewed. These include electrolytes, cathode (electrocatalysts), lithium metal anodes, and oxygen‐selective membranes (oxygen supply from air). A perspective for the future of rechargeable Li‐air batteries is provided.

No abstract

No abstract

Suppressing lithium (Li) dendrite growth is one of the most critical challenges for the development of Li metal batteries. Here, we report for the first time the growth of dendrite-free lithium films with a self-aligned and highly compacted nanorod structure when the film was deposited in the electrolyte consisting of 1.0 M LiPF6 in propylene carbonate with 0.05 M CsPF6 as an additive. Evolution of both the surface and the cross-sectional morphologies of the Li films during repeated Li deposition/stripping processes were systematically investigated. It is found that the formation of the compact Li nanorod structure is preceded by a solid electrolyte interphase (SEI) layer formed on the surface of the substrate. Electrochemical analysis indicates that an initial reduction process occurred at ∼ 2.05 V vs Li/Li(+) before Li deposition is responsible for the formation of the initial SEI, while the X-ray photoelectron spectroscopy indicates that the presence of CsPF6 additive can largely enhance the formation of LiF in this initial SEI. Hence, the smooth Li deposition in Cs(+)-containing electrolyte is the result of a synergistic effect of Cs(+) additive and preformed SEI layer. A fundamental understanding on the composition, internal structure, and evolution of Li metal films may lead to new approaches to stabilize the long-term cycling stability of Li metal and other metal anodes for energy storage applications.

The formation of lithium dendrites is suppressed using a Li1.5Al0.5Ge1.5(PO4)3–poly­(ethylene oxide) (LAGP-PEO) composite solid electrolyte and a PEO (lithium bis­(trifluoromethane)­sulfonimide) [PEO (LiTFSI)]-modified lithium metal anode in all-solid-state lithium batteries. The effects on the anode performance based on the PEO content in the composite solid electrolyte and the molecular weight of PEO used to modify the Li anode are studied. The structure, surface morphology, and stability of the composite solid electrolyte are examined by X-ray diffraction spectroscopy, scanning electron microscopy, and electrochemical tests. Results show that the presence of a PEO-500000­(LiTFSI) film on a Li anode results in good mechanical properties and satisfactory interface contact features. The film can also prevent Li from reacting with LAGP. Furthermore, the formation of lithium dendrites can be effectively inhibited as the composite solid electrolyte is combined with the PEO film on the Li anode. The ratio of PEO in the composite solid electrolyte can be reduced to a low level of 1 wt %. PEO remains stable even at a high potential of 5.12 V (vs Li/Li+). The assembled Li-PEO (LiTFSI)/LAGP-PEO/LiMn0.8Fe0.2PO4 all-solid-state cell can deliver an initial discharge capacity of 160.8 mAh g–1 and exhibit good cycling stability and rate performance at 50 °C.

Establishing c-Myc's (Myc) role in liver regeneration has proven difficult particularly since the traditional model of partial hepatectomy may provoke an insufficiently demanding proliferative stress. We used a model of hereditary tyrosinemia whereby the affected parenchyma can be gradually replaced by transplanted hepatocytes, which replicate 50-100-fold, over several months. Prior to transplantation, livers from myc−/− (KO) mice were smaller in young animals and larger in older animals relative to myc+/+ (WT) counterparts. KO mice also consumed more oxygen, produced more CO2 and generated more heat. Although WT and KO hepatocytes showed few mitochondrial structural differences, the latter demonstrated defective electron transport chain function. RNAseq revealed differences in transcripts encoding ribosomal subunits, cytochrome p450 members and enzymes for triglyceride and sterol biosynthesis. KO hepatocytes also accumulated neutral lipids. WT and KO hepatocytes repopulated recipient tyrosinemic livers equally well although the latter were associated with a pro-inflammatory hepatic environment that correlated with worsening lipid accumulation, its extracellular deposition and parenchymal oxidative damage. Our results show Myc to be dispensable for sustained in vivo hepatocyte proliferation but necessary for maintaining normal lipid homeostasis. myc−/− livers resemble those encountered in non-alcoholic fatty liver disease and, under sustained proliferative stress, gradually acquire the features of non-alcoholic steatohepatitis.