Cellobiose dehydrogenase catalyses the oxidation of aldoses--a simple reaction, a boring enzyme? No, neither for the envisaged bioelectrochemical applications nor mechanistically. The catalytic cycle of this flavocytochrome is complex and modulated by its flexible cytochrome domain, which acts as a built-in redox mediator. This intramolecular electron transfer is modulated by the pH, an adaptation to the environmental conditions encountered or created by the enzyme-producing fungi. The cytochrome domain forms the base from which electrons can jump to large terminal electron acceptors, such as redox proteins, and also enables by that path direct electron transfer from the catalytically active flavodehydrogenase domain to electrode surfaces. The application of electrochemical techniques to the elucidation of the molecular and catalytic properties of cellobiose dehydrogenase is discussed and compared to biochemical methods. The results lead to valuable insights into the function of this cellulose-bound enzyme, but also form the basis of exciting applications in biosensors, biofuel cells and bioelectrocatalysis.

Cellobiose dehydrogenases (CDHs, EC 1.1.99.18) contain a larger flavin-associated (dehydrogenase) domain and a smaller heme-binding (cytochrome) domain. CDHs from basidiomycete fungi oxidize at an appreciable level cellobiose, cellodextrins, and lactose, and those from ascomycetes may additionally oxidize some monosaccharides to their corresponding lactones at the flavin domain. CDHs are able to communicate directly with an electrode via their heme domain. In this work, different types of CDHs have been adsorbed on graphite electrodes and studied with respect to their direct electron transfer (DET) properties. Electrochemical studies were performed in the presence and absence of single-walled carbon nanotubes (SWCNTs) using lactose as substrate. In the presence of SWCNTs, the electrocatalytic current for substrate oxidation based on DET between enzyme and electrode was significantly increased. Furthermore, the onset of the electrocatalytic current was at lower potential than in the absence of SWCNTs. The highest electrocatalytic activity toward oxidation of lactose was found for CDH from the basidiomycete Phanerochaete sordida. Based on CDH from Phanerochaete sordida, an anode for biofuel cells was developed. This anode using lactose as substrate was combined with a Pt black cathode for oxygen reduction as a model for a membrane-less biofuel cell in which the processes at both electrodes occur by DET.

A powerful alternative to glucose oxidase as anode material in implantable biofuel cells is presented: Cellobiose dehydrogenase (CDH) from the ascomycete Myriococcum thermophilum (MtCDH) catalyzes the electrochemical oxidation of glucose, lactose, and cellobiose over a broad pH range. Current densities of more than 1 mA • cm -2 can be reached when MtCDH is wired to an Os redox polymer in the presence of single-walled carbon nanotubes and when lactose is used as a substrate at pH 8. In contrast to CDHs from basidiomycete fungi, which oxidize only β-1,4-linked di-and oligosaccharides efficiently, MtCDH is also able to oxidize glucose and other monosaccharides at relatively high turnover rates. The current density toward oxidation of 5 mM glucose under physiological conditions was about 100 µA • cm -2 . Outstanding properties of MtCDH are high-temperature stability; a strong discrimination of oxygen turnover (and therefore no H 2 O 2 production) in the presence of alternative electron acceptors; an ability to oxidize a range of carbohydrates, and a working pH from 3 to 10, which allows for combination with a variety of enzyme-based cathodes for oxygen reduction. The performance and stability of a membraneless glucose biofuel cell consisting of an MtCDH-modified anode and a Pt black cathode working under physiological conditions (PBS buffer, pH 7.4, 37 °C) were investigated over a period of 3 days. A maximum voltage of 500 mV, a maximum current density of almost 700 µA • cm -2 , and a maximum power density of 157 µW • cm -2 at an operating voltage of 280 mV (under oxygen purging/ nonquiescent conditions) could be obtained with glucose (100 mM) as the substrate. Furthermore, the direct and mediated electron-transfer properties of MtCDH are compared in this work. The electrocatalytic current detected for mediated electron transfer (MET) is much higher and starts at a less positive potential than that for direct electron transfer (DET). The reason is that, in MET, the Os redox polymer is able to collect the electrons from the catalytically active flavin domain, whereas DET requires the oxidation of the heme domain, which has a more positive redox potential. The electrocatalytic current densities for DET and MET are significantly increased in the presence of single-walled carbon nanotubes.

One of the challenges in the field of biosensors and biofuel cells is to establish a highly efficient electron transfer rate between the active site of redox enzymes and electrodes to fully access the catalytic potential of the biocatalyst and achieve high current densities. We report on very efficient direct electron transfer (DET) between cellobiose dehydrogenase (CDH) from Phanerochaete sordida (PsCDH) and surface modified single walled carbon nanotubes (SWCNT). Sonicated SWCNTs were adsorbed on the top of glassy carbon electrodes and modified with aryl diazonium salts generated in situ from p-aminobenzoic acid and p-phenylenediamine, thus featuring at acidic pH (3.5 and 4.5) negative or positive surface charges. After adsorption of PsCDH, both electrode types showed excellent long-term stability and very efficient DET. The modified electrode presenting p-aminophenyl groups produced a DET current density of 500 μA cm−2 at 200 mV vs normal hydrogen reference electrode (NHE) in a 5 mM lactose solution buffered at pH 3.5. This is the highest reported DET value so far using a CDH modified electrode and comes close to electrodes using mediated electron transfer. Moreover, the onset of the electrocatalytic current for lactose oxidation started at 70 mV vs NHE, a potential which is 50 mV lower compared to when unmodified SWCNTs were used. This effect potentially reduces the interference by oxidizable matrix components in biosensors and increases the open circuit potential in biofuel cells. The stability of the electrode was greatly increased compared with unmodified but cross-linked SWCNTs electrodes and lost only 15% of the initial current after 50 h of constant potential scanning.

Electrical wiring of different types of pyranose oxidase (P2O) (fungal wild type, recombinant wild type with a hexahistidine tag, mutant form E542K with a hexa-histidine tag) from Trametes multicolor, and recombinant P2O from Coriolus sp. overexpressed in Escherichia coli as well as of pyranose dehydrogenase (PDH) from Agaricus meleagris and Agaricus xanthoderma with an osmium redox polymer (poly(1-vinylimidazole) 12 -[Os(4,4'-dimethyl-2,2'-dipyridyl) 2 -Cl 2 ] 2þ/þ ) on graphite electrodes was carried out. After optimization studies using glucose as substrate, the biosensors, which showed the best characteristics in terms of linear range, detection limit and sensitivity were selected, viz. wild type P2O from T. multicolor and PDH from A. meleagris. These two enzymes were used and investigated for their selectivity for a number of different sugars.

While there is broad agreement on the catalytic mechanism of Multicopper Oxidases (MCOs), the geometric and electronic structures of the resting trinuclear Cu cluster have been variable, and their relevance to catalysis debated. Here, we present a spectroscopic characterization, complimented by crystallographic data, of two resting forms occurring in the same enzyme, and define their interconversion. The resting oxidized form shows similar features to the resting form in Rhus vernicifera and Trametes versicolor laccase, characterized by ‘normal’ type 2 Cu EPR features, 330nm absorption shoulder, and a short type 3 (T3) Cu-Cu distance, while the alternative resting form shows unusually small A-parallel and high g-parallel EPR features, lack of 330nm absorption intensity, and a long T3 Cu-Cu distance. These different forms are evaluated with respect to activation for catalysis, and it is shown that the alternative resting form can only be activated by low-potential reduction, in contrast to the resting oxidized form which is activated via the type 1 Cu at high potential. This difference in activity is correlated to differences in redox states of the two forms, and highlights the requirement for efficient sequential reduction of resting MCOs for their involvement in catalysis.

No abstract

Direct and mediated electron transfer (DET and MET) between the enzyme and electrodes were compared for cellobiose dehydrogenase (CDH) from the basidiomycete Phanerochaete sordida (PsCDH). For DET, PsCDH was adsorbed at pyrolytic graphite (PG) electrodes while for MET the enzyme was covalently linked to a low potential Os redox polymer. Both types of electrodes were prepared in the presence of single walled carbon nanotubes (SWCNTs). DET requires the oxidation of the heme domain, while MET occurs partially via the heme and the flavin domain at pH 3.5. At pH 6 MET occurs solely via the flavin domain. Most probably, the interaction of the domains decreases from pH 3.5 to 6.0 due to electrostatic repulsion of deprotonated amino acid residues, covering the surfaces of both domains. MET starts at a lower potential than DET. The midpoint potentials at pH 3.5 for the flavin (40 mV) and the heme domain (170 mV) were determined with spectroelectrochemistry. The electrochemical and spectroelectrochemical measurements presented in this work are in conformity. The pH dependency of DET and MET was investigated for PsCDH. The optimum was observed between pH 4 and 4.5 pH for DET and in the range of pH 5-6 for MET. The current densities obtained by MET are 1 order of magnitude higher than by DET. During multicycle cyclic voltammetry experiments carried out at different pHs, the PsCDH modified electrode working by MET turned out to be very stable. In order to characterize a PsCDH modified anode working by MET with respect to biofuel cell applications, this electrode was combined with a Pt-black cathode as model for a membraneless biofuel cell. In comparison to DET, a 10 times higher maximum current and maximum power density in a biofuel cell application could be achieved by MET. While CDH modified electrodes working by DET are highly qualified for applications in amperometric biosensors, a much better performance as biofuel cell anodes can be obtained by MET. The use of CDH modified electrodes working by MET for biofuel cell applications results in a less positive onset of the electrocatalytic current (which may lead to an increased cell voltage), higher current and power density, and much better long-term stability over a broad range of pH.