Transportasi merupakan kebutuhan setiap manusia untuk menunjang pekerjaannya. Saat ini kendaraan ramah lingkungan yang banyak dikembangkan adalah kendaraan listrik. Kendaraan listrik dianggap bebas emisi dan dapat mempengaruhi kondisi lingkungan. Salah satu komponen penting pada kendaraan listrik adalah chassis. Untuk itu, diperlukan desain chassis yang tepat agar keamanan dan kenyamanan kendaraan terjamin. Dalam perkembangan kendaraan listrik, model penggerak motor listrik langsung ditempatkan pada roda atau yang sering disebut dengan in-wheel. Tujuan penelitian ini adalah (1) Mendesain chassis pada kendaraan listrik tipe in-wheel, (2) Menganalisis tegangan von mises dari desain chassis kendaraan listrik tipe in-wheel, (3) Menganalisis safety factor pada kendaraan listrik ramah lingkungan tipe in-wheel. Metode penelitian menggunakan simulasi. Simulasi dilakukan dengan menggunakan software Autodesk Inventor. Material yang digunakan yaitu baja AISI 1018 HR. Hasil Penelitian menunjukkan telah dihasilkan desain chassis untuk kendaraan listrik 6 orang penumpang. Tegangan von mises pada chassis minimum sebesar 0 dan maksimal 20,33 MPa, displacement minimum sebesar 0 dan maksimum sebesar 0,22, serta nilai safety factor minimum sebesar 12,3 dan maksimum sebesar 15. Berdasarkan hasil penelitian desain chassis yang telah dibuat dikategorikan aman secara teknis.
Tujuan penelitian yaitu menguji kevalidan, menganalisis kepraktisan, dan keefektifan dari Lembar Kerja Praktik Analitik (LKPA). Penelitian ini menggunakan metode penelitian dan pengembangan dengan tahapan studi pendahuluan dan pengumpulan informasi, perencanaan desin produk, pengembangan rancangan produk awal, uji coba produk awal, revisi produk, dan uji coba produk skala terbatas. Analisis data menggunakan analisis deskriptif dan dipadu dengan uji beda rata-rata. Hasil penelitian menunjukkan produk LKPA melalui expertjudgment dinyatakan sangat valid dari segi teknologi pendidikan dan materi kelistrikan otomotif. Kepraktisan LKPA dinyatakan praktis digunakan untuk kegiatan pembelajaran praktikum. Skor tes kemampuan analitik sistem dan starter kelompok eksperimen lebih tinggi dari pada kelompok kontrol dan skor tes kedua kelompok berbeda secara signifikan. Analisis keefektifan tersebut menyatakan bahwa LKPA efektif menguatkan kemampuan praktik dan analitik praktikan. Hasil penelitian dapat disimpulkan bahwa LKPA valid sebagai perangkat pembelajaran praktikum dan praktis digunakan untuk kegiatan praktikum, serta efektif meningkatkan kemampuan analitik, dan menguatkan kompetensi mahasiswa calon guru otomotif.The purpose this study is testing the validity, analyzing the practicality and effectiveness of analytic practice worksheets (LKPA). This study uses (R&D) method up to limited scale testing products. The data analysis uses descriptive analysis and combined with t-test. The results, products that are finalized with expert judgment are very valid in terms of educational technology and automotive electrical learning material. The practical, stated it practical to be used in practical learning activities. Analytical ability test scores of ignition system and starter system in experimental group test are higher than control group and the two groups are different significantly. The effectiveness analysis, states that LKPA is effective to strengthen the practice ability and analytic ability. The concluded that LKPA is valid as the tools of practical learning and practical to be used for practicum, and also effective in improving analytic capabilities, so there is a strengthening of the competence as the teacher candidates.
Transportation is important for humans. Generally, the means of transportation use machines that can pollute the environment. The use of fuel oil which is used as a driving force for vehicles can be the main cause of the release of various pollutants. Emissions generated by internal combustion engines can cause many losses. Losses due to emissions include losses on health, the environment, and economic impacts. Besides, the amount of fuel oil resources is decreasing every year. For that to anticipate this need development electric bike. The campus environment, especially that of the more established universities, has entered the public consciousness as being a haven for electric bike use. The main advantages of electric bikes are economical and environmentally friendly. The objectives of this study were (1) to design an electric bike, (2) to analyze the strength of the sliding frame of an electric bike, (3) to test the distance traveled by an electric bike. The research method used research and development. The results of the research are (1) an electric bike design with a sliding frame has been created, (2) the results of the frame analysis using iron material, the von mises stress 49.98 MPa, a maximum displacement of 0.125 mm, and a safety factor is 3. (3) Based on the test track, an electric bike using a sliding frame can travel a distance of 75 km with a maximum speed of 25 km/hour.
Penelitian ini bertujuan untuk mengembangkan jobsheet elektronik pada materi Praktik pengelasan GMAW (Gas metal Arc Welding) yang layak dan praktis untuk digunakan dalam pembelajaran. Metode penelPenelitian ini bertujuan untuk mengembangkan jobsheet elektronik pada materi Praktik pengelasan GMAW (Gas metal Arc Welding) yang layak dan praktis untuk digunakan dalam pembelajaran. Metode penelitian yang digunakan yaitu metode penelitian dan pengembangan dengan desain penelitian four-D model. Subjek penelitian adalah mahasiswa, ahli materi, dan ahli media. Teknik analisis data yang digunakan dalam penelitian ini adalah deskriptif kuantitatif menggunakan analisis persentase. Hasil penelitian menunjukkan bahwa jobsheet elektronik hasil pengembangan sangat layak dan sangat praktis untuk digunakan dalam pembelajaran praktik pengelasan GMAW. Hal ini terlihat dari hasil validasi ahli materi dengan skor persentase sebesar 84,64 % atau pada kategori sangat layak, sedangkan skor validasi ahli media sebesar 85,73 % juga pada kategori sangat layak. Selain itu hasil penilaian kepraktisan oleh mahasiswa memperoleh skor sebesar 81,33 % atau sangat praktis digunakan.itian yang digunakan yaitu metode penelitian dan pengembangan dengan desain penelitian four-D model. Subjek penelitian adalah mahasiswa, ahli materi, dan ahli media. Teknik analisis data yang digunakan dalam penelitian ini adalah deskriptif kuantitatif menggunakan analisis persentase. Hasil penelitian menunjukkan bahwa jobsheet elektronik hasil pengembangan sangat layak dan sangat praktis untuk digunakan dalam pembelajaran praktik pengelasan GMAW. Hal ini terlihat dari hasil validasi ahli materi dengan skor persentase sebesar 84,64 % atau pada kategori sangat layak, sedangkan skor validasi ahli media sebesar 85,73 % juga pada kategori sangat layak. Selain itu hasil penilaian kepraktisan oleh mahasiswa memperoleh skor sebesar 81,33 % atau sangat praktis digunakan.
Education is an attempt to form a good body and soul personality. Not only mastering science and technology. But also the important thing is knowledge and recognition of the students themselves. Many people are busy with competition but forget about their identity, with religious teachings. Emphasis on soft skills is important by introducing students' identities. In terms of student character, there are aspects that need to be developed, specifically soft skills. Soft skills are an important aspect of student academic success and at work. This study describes the soft skills that need to be developed for vocational school-based students. Based on data colected 100% respondents argued that hard work is very important to be developed in students. Apart from that, other characters include honesty, discipline, sociability, hard work, love of work, leadership, competitive, regular life, and the ability to sell ideas.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.