Dalam rangka meningkatkan kinerja program pengabdian kepada masyarakat di lingkungan kecamatan Cimanggis Depok, dalam memberikan pelayanan pelatihan pembuatan larutan pembersih lantai, maka Fakultas Teknologi Industri Universitas Jayabaya melaksanakan pengukuran “Kepuasan Masyarakat”. Survei Kepuasan Masyarakat bertujuan untuk mendapatkan feedback/ umpan balik atas kinerja/ kualitas pelayanan yang diberikan kepada masyarakat guna perbaikan/ peningkatan kinerja/ kualitas pengabdian secara berkesinambungan. Program Pelatihan Pembuatan Pembersih Lantai Kepada Penduduk Pada Usia Produktif (Belum Bekerja) di Kecamatan Cimanggis Depok, perlu dilakukan survei kepuasaan pelanggan agar dapat diketahui tingkat kualitas materi pelatihan dan pelayanan program pengabdian kepada masyarakat sebagai bahan untuk menetapkan kebijakan dalam rangka meningkatkan kualitas pelayanan selanjutnya.Dari survei yang dilakukan diperoleh rata-rata nilai indeks 3,85 dari 7 variabel yang berada dalam nilai interval 3,26 – 4,00 atau nilai interval konversi sebesar nilai indeks x nilai dasar = 3,85 x 25 = 96,23% yang berada dalam nilai interval konversi antara 81,26 – 100,00. Angka ini menunjukkan bahwa Mutu Pelayanan program Pengabdian Kepada Masyarakat mendapatkan nilai A yang berarti Kinerja Unit Pelayanan PKM “Sangat Baik/Sesuai”. Namun perlu adanya perbaikan di keandalan (reliability) para narasumber dalam menyiapkan dan menyampaikan materi pelatihan karena nilai indeks yang lebih rendah dari variabel lainnya yaitu 3,61 atau 90,28%.
Indonesia merupakan salah satu negara yang terdampak Covid-19, Indonesia menempati urutan tertinggi di Asia Tenggara sebagai negara dengan kasus Covid-19. Indonesia juga berada di peringkat 31 dunia dan 11 se-Asia dengan total keseluruhan mencapai 41.431 kasus dari data 17 Juni 2020. Salah satu provinsi di Indonesia yang terdapat banyak kasus positif adalah Jawa Barat. Jawa Barat menempati peringkat tiga sebagai provinsi dengan kasus positif Covid-19. Kota Depok merupakan salah satu wilayah Provinsi Jawa Barat yang paling banyak kasus dimana hingga per 17 Juni 2020, terkonfirmasi 671 kasus positif Covid-19. Hal ini menjadi perhatian karena banyak masyarakat Kota Depok yang terdampak Covid-19, seperti usaha yang mengalami kebangkrutan dan Pemutusan Hubungan Kerja dikarenakan operasional yang tidak berjalan dengan normal. Melihat situasi Kota Depok terkait Covid-19, FTI-UJ selaku instansi pendidikan yang berada di wilayah Kota Depok mencoba membantu mempersiapkan dan membekali siswa sekolah guna menghadapi Era New Normal yang sedang digalakkan pemerintah untuk meningkatkan perekonomian negara. FTI-UJ bekerja sama dengan SMK Nasional Depok memberikan pelatihan AutoCAD kepada siswa sekolah SMK Nasional Depok agar kelak mampu bersaing di Era New Normal. Hasil dari kegiatan ini adalah panduan-panduan praktis dan sederhana dalam membuat desain menggunakan AutoCAD.
The main problem that occurs in most ultrasonic welding processes on thermoplastic SAN (AS) materials that use ultrasonic welding machines is the selection of inappropriate parameters. This will cause various defects in the product, one of which is bubble welding. One of the most influential parameters on the welding results is the frequency and current parameters. This is because this parameter has a fairly high level of sensitivity to the welding results. Therefore, the purpose of this study was to examine the effect of frequency and current on the product produced by welding on 5 different parameters using 10 available samples. To determine the effect of the parameters of the magnitude of the frequency and current, the inspection method is used. This method aims to visually test the quality of the welding results. Based on the test, the results were obtained that by using the parameters of the frequency magnitude of 8 - 14 Hz and current of 15 - 18 amperes can produce the best welding results.
Kota Depok merupakan wilayah yang dikategorikan sebagai zona merah penyebaran COVID-19 dimanahingga per 1 Mei 2020, Terkonfirmasi 298 kasus positif COVID-19 di Kota Depok. Menurut data SitrepCegat COVID-19, Kota Depok merupakan daerah dengan rasio penyebaran COVID-19 tertinggi diBodetabek. Untuk menanggulagi hal tersebut BAZNAS Kota Depok (Mitra) melakukan aksi tanggapdarurat COVID-19 antara lain Gerakan bersih dan sehat, Bantuan APD Tenaga Kesehatan, GerakanKadeudeuh Pangan. Untuk mengoptimalkan hal tersebut BAZNAS Kota Depok perlu bekerjasamadengan instansi yang ada di Kota Depok, hal ini dikarenakan fasilitas pendukung aksi tersebut masihmembeli kepada pihak ketiga. FTI-UJ selaku intsansi pendidikan yang berada di Kota Depok menawarkanSolusi berupa penyuluhan pembutan Face Shield. Selain itu, FTI-UJ memberikan bantuan fasilitaspendukung berupa 20 buah face shield, serta menjadi donatur pada kegiatan kadeudeuh pangan.
Pelumas bertindak sebagai media anti-gesekan dan membantu mengurangi keausan komponen selama kontak dengan gerakan bagian-bagian mesin. Di seluruh dunia, cadangan berbasis minyak bumi akan menipis sehingga dapat menyebabkan kenaikan harga dan menciptakan kekhawatiran pencemaran lingkungan. Studi ini mengkaji mengolah kembali minyak pelumas bekas SAE 15W-40 API CI-4 menjadi minyak pelumas bekas yang dapat dimanfaatkan untuk pelumas putaran rendah. Minyak pelumas bekas SAE 15W-40 API CI-4 yang telah digunakan pada mesin mobil, mengalami perubahan sifat fisik maupun kimia, yakni mengandung air hasil pembakaran bahan bakar, partikel keausan logam, jelaga, dan oksidasi pelumas seperti lumpur dan asam yang bersifat korosif. Metode penelitian yang digunakan untuk memisahkan zat pengotor yang terkandung pada minyak pelumas bekas SAE 15W-40 API CI-4 adalah dengan proses adsorbsi (penjerapan) dan pengujian beberapa jenis pelumas mesin yaitu DEO API CI-4 SAE 15W-40, PCMO API SN SAE 10W-40, MCO API SL SAE 10W-30, HO ISO VG 32, TO API TO-4 SAE 10W dengan kekentalan dan penambahan aditif, menggunakan metode uji ASTM, untuk uji viskositas indeks (ASTM D2270), Titik Tuang (ASTM D97) dan Titik Nyala (ASTM D92). Hasil penelitian menunjukkan bahwa semakin tinggi golongan bahan baku yang digunakan untuk pembuatan pelumas, maka semakin bagus kualitas pelumas yaitu meliputi viskositas indeks, titik tuang dan titik nyala.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.