No abstract

A droplet-based microfluidic platform is presented to study the nucleation kinetics of calcium oxalate monohydrate (COM), the most common constituent of kidney stones, while carefully monitoring the pseudo-polymorphic transitions. The precipitation kinetics of COM is studied as a function of supersaturation and pH as well as in the presence of inhibitors of stone formation, magnesium ions (Mg2+), and osteopontin (OPN). We rationalize the trends observed in the measured nucleation rates leveraging a solution chemistry model validated using isothermal solubility measurements. In equimolar calcium and oxalate ion concentrations with different buffer solutions, dramatically slower kinetics is observed at pH 6.0 compared to pHs 3.6 and 8.6. The addition of both Mg2+ and OPN to the solution slows down kinetics appreciably. Interestingly, complete nucleation inhibition is observed at significantly lower OPN, namely, 3.2 × 10−8 M, than Mg2+ concentrations, 0.875 × 10−4 M. The observed inhibition effect of OPN emphasizes the often-overlooked role of macromolecules on COM nucleation due to their low concentration presence in urine. Moreover, analysis of growth rates calculated from observed lag times suggests that inhibition in the presence of Mg2+ cannot be explained solely on altered supersaturation. The presented study highlights the potential of microfluidics in overcoming a major challenge in nephrolithiasis research, the overwhelming physiochemical complexity of urine.

Accurate Calcium Oxalate Monohydrate (COM) solubility measurements are essential for elucidating the physiochemical mechanism behind the formation of kidney stones, nephrolithiasis. Yet the reported solubility values of COM in ultrapure water, arguably the simplest solvent relevant for nephrolithiasis, vary significantly depending on implemented method. To address this variation, we present an experimental study of the solubility of COM validated by a model based on the Debye–Hückel theory describing the solution chemistry and the complex formation. We also carefully monitor potential pseudopolymorphic/hydrate transitions during the solubility measurements with in-situ and ex-situ methods. Our results indicate that the solubility of COM in ultrapure water is a weak function of temperature. However, the measured solubility varies significantly in buffer solutions across physiologically relevant pH values at body temperature. The proposed model explains observed trends as a combined effect of ionic strength, protonation reactions, and soluble complex formation. Moreover, it predicts solubility of COM in buffer solutions remarkably well using our measurements in ultrapure water as input, demonstrating the consistency of presented approach. The presented study parleying experiments and modelling provides a solid stepping stone to extend the physiochemical understanding of nephrolithiasis to more realistic solutions laden with biological complexity.

We detail the analysis of centrifugal homogenization process by a hydrodynamic model and the modelguided design of a low-cost centrifugal homogenizer. During operation, centrifugal force pushes a multiphase solution to be homogenized through a thin nozzle, consequently homogenizing its contents. We demonstrate and assess the homogenization of coarse emulsions into relatively monodisperse emulsions, as well as the application of centrifugal homogenization in the mechanical lysis of mpkCCD mouse kidney cells. To gain insight into the homogenization mechanism, we investigate the dependence of emulsion droplet size on geometrical parameters, centrifugal acceleration, and dispersed phase viscosity. Our experimental results are in qualitative agreement with models predicting the droplet size. Furthermore, they indicate that high shear rates kept constant throughout operation produce more monodisperse droplets. We show this ideal homogenization condition can be realized through hydrodynamic model-guided design minimizing transient effects inherent to centrifugal homogenization. Moreover, we achieved power densities comparable to commercial homogenizers by model guided optimization of homogenizer design and experimental conditions. Centrifugal homogenization using the proposed homogenizer design thus offers a low-cost alternative to existing technologies as it is constructed from off-the-shelf parts (Falcon tubes, syringe, needles) and used with a centrifuge, readily available in standard laboratory environment.

Selective crystallization of polymorphs is highly sought after in industrial practice. Yet, state-of-the-art techniques either use laboriously engineered solid surfaces or strenuously prepared heteronucleants. We propose an approach where surfactants in solution self-assemble effortlessly into mesoscopic structures dictating the polymorphic outcome of the target solute. Sodium dodecyl sulfate (SDS) surfactant is used as a tailored additive to crystallize different polymorphic forms of a model active pharmaceutical ingredient, d -mannitol. Different mesoscopic phases of SDS template particular polymorphs: packed monolayers, micelles, and crystals favored the β, α, and δ forms of d -mannitol, respectively. A synergistic effect of topological templating and molecular interactions is proposed as the rationale behind the observed selective crystallization of polymorphs. This crystal engineering technique suggests that surfactant self-assemblies can be used as tailored templates for polymorphic control.